NETGEAR WNR612 User Manual page 89

Netgear WNR612 Wireless Router User Manual
Field
multi-media) wireless traffics according to data types within a certain range.
Settings Time-related information such as audio and video has higher
priority than normal data. To ensure proper performance of
WMM, wireless clients must support WMM.
Turn Internet Enable or disable QoS. After it is enabled, you can optimize the
QoS Access On network access traffics according to the settings in the QoS
Priority Table page.
Turn Bandwidth Set the maximum uplink bandwidth at the WAN port.
Control On If the value is in units of Kbps, the maximum value is 1000. If
the value is in units of Mbps, the maximum value is 100.
Setup QoS rule Click the button and the QoS Setup page is displayed
Enable Trusted After it is enabled, you can reserve half egress bandwidth for a
IP Address specified computer, to avoid impact to the computer because of
Internet access behaviors by other users in the network.
Trusted IP Specify the IP address of a computer. You need to enter only a
Address numeral in the fourth field.
Click Setup QoS Rule and the QoS Setup page appears:
Description
86