Add Wps Client - NETGEAR WNR612 User Manual

Netgear WNR612 Wireless Router User Manual

6.3 Add WPS Client

Click Add WPS Client on the left pane of the page to display the following page.
WPS refers to Wi-Fi Protected Setup. You can use the WPS setup function to add
a wireless client to a network, without setting specific parameters, such as SSID,
security mode, and password. To use this function, a wireless client must support
WPS. If the wireless client does not support WPS, you must manually configure the
wireless client to ensure that it has consistent SSID and wireless security settings
with the router. There are two WPS modes: Push Button and PIN.
Click Next to select the WPS mode.
Push Button mode
27