Table of Contents
Advertisement
11 SERVICE PRECAUTIONS
11.1. Firmware version-up of the DVD player
• The firmware of the DVD player may be renewed to improve the quality including operation ability and playability to the substan-
dard discs.processing to optimize the drive.
• Updating firmware
1. Download latest Firmware and burn it on CD-R disc.
2. Set the CD-R disc into the player and playback it.
3. When the message of recommending version-up appear in the LCD screen, check the Current Version.
a. If the version of the firmware installed on the player and the latest firmware version available are the same or the ver-
sion of the firmware installed on the player is higher than the latest version available.
No update is necessary --select [Cancel] to quit.
b. If the version of the firmware installed on the player is lower than the latest version available.
Updating is recommended --select [OK] to continue.
4. If choose [OK], the P-DVD player is automatically updated.
5. Finish the update, the player will restart automatically.
Note:
If the AC power supply is shut out during version-up due to a power failure, the version-up is improperly carried out.
In such a case, replace the Flash ROM and carry out the version-up again.
24
Advertisement
Table of Contents
