Page 1
QUBFour QUBFour Bluetooth Speaker MBQuart products are designed and engineered in the USA by 847-540-7700 www.maxxsonics.com This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
CONTENTS WARRANTY Page 3 Important Safety Instructions Maxxsonics USA Inc. warrants this product, to the original consumer purchaser, to be free from defects in material and workmanship for a period of one (1) year from the date of purchase. Controls Maxxsonics USA Inc.
IMPORTANT SAFETY INSTRUCTIONS SPECIFICATIONS Active Drivers: 2 - 50mm (1.97 Inches) Play Time: 10 to 12 Hours • Read, follow and keep these instructions. • Do not use this product near water or wet surfaces. Passive Drivers: Recharge Time: 3.0 Hours •...
CONTROLS RECEIVING AND MAKING CALLS Your speaker will allow you to make hands free calls provided your phone is connected via Bluetooth. Function Button Volume Up \ Down The AUX connection cannot be used for this function. To make a call: Use the phone as normal, select the Bluetooth speaker when prompted. To receive a call: Either push the FUNCTION button on the top of the speaker or answer the call with the phone making sure to select the Bluetooth speaker when prompted.
Using the supplied charge cable AUXILIARY INPUT CONNECTION CHARGING The fi rst time you use connect to a 110V wall outlet. your Bluetooth speaker, Insert the supplied 3.5mm cable please charge it for at into the speaker’s AUX input. While charging, the power switch least 3 hours.
Bluetooth source. past. Go to the Bluetooth menu of your source device and connect to QUBFour from the list of Turn off the speaker, then on again. Try pairing again. devices. If asked for a code, enter 0000.
Need help?
Do you have a question about the QUBFour and is the answer not in the manual?
Questions and answers