(more info about the location at www.bsr.se/ppc). Turn the ignition on. Select “Read DTCs” and press enter. Press enter to start reading. Do not forget to turn the ignition on.
Page 5
All DTCs are saved in the PPC’s memory, which can hold several readouts. You can, anytime, send all DTCs to your customer page www.bsr.se/ppc by simply synchronizing the PPC via the Internet. On the customer page a detailed DTC report with explaining texts is displayed.
(more info about the location at www.bsr.se/ppc). Turn the ignition on. Select “Erase DTCs” and press enter. Press enter to erase DTCs. Do not forget to turn the ignition on.
Page 7
Erasing DTCs. You can now disconnect the PPC from your car.
It is necessary to install the PPC Sync 3 program to be able to send the DTCs from the PPC unit to your customer page. Enter your customer page www.bsr.se/ppc and log in with your PPC number and password that were sent to your e-mail. Click on the PPC Sync 3 link to start the installation.
Page 9
Click Install this driver software anyway. Now connect PPC to your computer Click Finish. with the USB cable. The installation is complete! You can now use the PPC Sync 3 program.
HanDlE DtCs Via PPC synC 3 anD tHE CUstoMER PaGE PPC Sync 3 USB cable PPC unit 1. Connect PPC to your computer with the USB cable. 1. Connect PPC to your computer with the USB PPC to your computer with the USB The computer must be connected to the Internet.
Page 11
5. Enter your customer page www.bsr.se/ppc and log in with your PPC number and password. 6. Click on “DTC report” and choose one of the cars that you have read DTCs from. The DTCs are sorted by the date of the reading and by the control units of the car.