Table of Contents
Advertisement
13. Close all zip entrances on the awning's flysheet and peg out the storm straps and guy lines.
Start with rear corners then peg the front corners, ensuring that there is no slack material between
the four corners. Peg the remaining pegging points, cross pegging the doorways and entrances.
Adjust the guy lines and storm straps as necessary.
13.
14. Your AIR awning includes a groundsheet which may be used by carefully matching its Velcro to
the relevant Velcro on the awning flysheet and the AIR tent skirt.
15. If required attach inner tents to internal fixings at both ends of the awning. The fixings are
colour coded.
15.
16. There are zipped PVC pockets for the use of LED light strips (optional extra) within some of
your AIR awning roof beams.
16.
8
Advertisement
Table of Contents
