Table of Contents
Advertisement
AIR AWNING.
PARTS LIST FOR AIR AWNING
1. AIR Awning with sewn in side pods
2. Inner Tents x 2
3. Pegs and ladder bands x 32
4. Webbing Straps x 10
5. PE Groundsheet x 1
6. Repair Kit x 1
ASSEMBLY
Try to choose a site that is relatively flat. Avoid sites where the land may flood or where water will
run down. DO NOT pitch directly under trees. Pitching near a hedge or wall may provide shelter
against wind. AVOID areas with heavy pollution and where crop spraying may be in progress.
1. Remove AIR Awning from the carry/storage bag.
2. Ensure the ground is free of stones and other sharp objects. Unpack and spread the AIR awning
on the ground.
3. Attach front skirt to the AIR OPUS
.
®
4. Slide the zip on the back of the AIR awning onto the zip on the front of the AIR tent. The zip is
located under the flap above the front door.
5. Temporarily peg the 4 corners of the flysheet in line with your AIR OPUS
tent. You may need to
®
re-peg these at a later stage.
6. Join the Velcro patches on the AIR awning and AIR tent (top and both sides).
4.
6.
7. Ensure the AIR tent and AIR awning are totally connected.
8. Ensure all external AIR valves are closed to allow for inflation and ensure all internal valves are open.
9. Locate the main inflation valve which is located at the front of the middle AIR beam.
10. Attach the pump extension to the pump and connect the pump nozzle into the main inflation
valve and press the button to activate the pump.
11. The AIR awning will inflate, the pump will automatically switch off when the pressure has
reached 7psi.
12. Close all internal valves. We recommend you keep all valves closed whilst product is in use.
7
Advertisement
Table of Contents
