Tuning To Preset Radio Stations; Erasing A Preset Radio Station; External Sources; Listening To External Sources - Philips FWC527/37 User Manual

Notes:
– If you attempt to store more than 40 preset
radio stations, "PROGRAM FULL" will be
displayed.
– During programming, if no button is pressed
within 20 seconds, the system will exit the Program
mode automatically.

Tuning to Preset Radio Stations

G Once you've preset the radio stations, press í
or ë to select the desired preset number.
➜ The preset number, radio frequency, and
waveband will appear on the display.

Listening to External Sources

1
Connect the audio out terminals of the external
equipment (TV, VCR, Laser Disc player, DVD
player or CD Recorder) to the AUX/CDR IN
terminals of your system.
2
Press AUX (CDR/DVD) repeatedly to select
CDR/DVD mode or normal AUX mode.
➜ "CDR/DVD" or "AUX" will be displayed.
Radio Reception

Erasing a Preset Radio Station

1
Press í or ë to select the preset radio station
to be erased.
2
Press and hold Çon the system until "PRESET
DELETED" appears on the display.
➜ The radio frequency remain on the display.
➜ The preset numbers of all other preset radio
stations in the band with higher numbers are
now decreased by one.
G Repeat steps 1–2 to erase other preset radio
stations.
For Recording, please refer to "Tape
Operation/Recording".

External Sources

G If the sound from the external source is
distorted, select CDR/DVD mode for listening.
Notes:
– You are advised not to listen to and record from
the same source simultaneously.
– All the navigation sound control features (DSC
or VAC, for example) are available for selection.
– Refer to the operating instructions for the
connected equipment for details.
For Recording, please refer to "Tape
Operation/Recording".
21