Tape Operation/Recording; Tape Playback - Philips FWC555 User Manual

FW- MINI HIFI SYSTEM
STANDBY-ON
ECO POWER
DISPLAY
DEMO
PLAY•
STOP/
PAUSE
CLEAR
TAPE 1
IMPORTANT!
– Before playing a tape, check and tighten
slack tape with a pencil. Slack tape may get
jammed or may burst in the mechanism.
– C-120 tape is extremely thin and is easily
deformed or damaged. It is not
recommended for use in this system.
– Store the tapes at room temperature and
do not put them too close to a magnetic
field (for example, a transformer, TV or
speaker).

Tape Playback

1
Press çto open the tape deck door.
2
Insert a recorded tape and close the tape door.
G Load the tape with the open side down and the
full spool to the left.
3
Press TAPE (TAPE 1•2) repeatedly to select
tape deck 1 or tape deck 2.
➜ The selected tape deck number is displayed.
4
Press PLAYÉ to start playback.
pg 001-028/C555/21-Eng

Tape Operation/Recording

INTERACTIVE VU METER
CLOCK• AUTO
PROG DUBBING REC
TIMER REPLAY
CD 1•2•3 BAND
MAX SOUND
CD TUNER
SOURCE
•
MAX BASS DYNAMIC AMPLIFICATION
CONTROL (DAC)
•
TAPE AUX
MAX BASS PORT
TAPE 1•2 CDR / DVD
G Press Ç.
G Press AUTO REPLAY repeatedly to select the
1
2
G When in stop mode, pressÇ.
21
VOLUME
TAPE 2
To stop playback
To change the playback mode
different playback modes.
➜ "AUTO REPLAY" ( å ) or "ONCE" will
appear on the display.
AUTO REPLAY ...the tape will rewind
automatically at the end of
playback and replay again. It will
replay up to a maximum of 20
times until you press Ç.
ONCE .............. the tape will playback the
selected side once and then stop.
To rewind or fast forward when playback
is stopped
Press à or á.
Press Ç when you reached the desired passage.
To reset tape counter number
➜ "T1 000" or "T2 000" will be displayed.
Notes:
– The tape counter will automatically set to zero
after detecting end of tape.
12/11/01, 5:22 PM
21
3139 115 21161