Tape - Philips FW-P78 User Manual

TUNER
Changing the MW tuning grid
(not available for version /30)
The frequency step can be changed if
necessary. In North and South America, the
frequency step between adjacent channels
in the MW band is 10 kHz. In other parts of
the world, it is 9 kHz. The frequency step
presetted in the factory is 9 kHz.
For MW band
To change from 9 kHz to 10 kHz or vice
versa
Changing of tuning grid will erase all
previously stored preset stations.
1 Disconnect the system from the AC
power supply (pull out the AC power
cord) .
2 Press TUNER and TUNING á
depressed while reconnecting the
system to the AC power supply.
™ Display will show "GRID 9" or
"GRID 10".
Notes:
– GRID 9 indicates that the tuning grid is
in step of 9 kHz in MW band. GRID 10
indicates that the tuning grid is in step
of 10 kHz in MW band.
– FM tuning grid will also be changed
from 50 kHz to 100 kHz or vice versa.
All preset radio stations will also be
erased.
Untitled-2 19

TAPE

MINI HIFI SYSTEM
PROGRAM SHUFFLE
REPEAT TIMER REC
NEWS T.A. AM MW FM LW
60Hz 250Hz
500Hz 1KHz
STANDBY
ON
CLOCK/
TIMER C D 1 • 2 • 3 BAND
CD TUNER
PROG
SEARCH • TUNING STOP• CLEAR PLAY
SOUND NAVIGATION
DIGITAL SOUND
CONTROL
Loading a tape
1 Press OPEN.
2 The tape deck door opens.
3 Load the tape with the open side
downward and the full spool to the left.
4 Close the tape deck door.
6/8/01, 10:13 AM
C
STEREO
L R
BACK
FRONT
HSD
PRO LOGIC
4KHz 8KHz
2KHz
S S
TAPE 1 • 2 CDR / VIDEO
TAPE AUX
A.REV
SIDE A•B PRESET
PAUSE PREV SIDE NEXT
MIC
LEVEL
DYNAMIC BASS
MIC
BOOST
3139 116 19782
19