LRP Quadra Competition V1 User Manual

LRP electronic GmbH
Hanfwiesenstraße 15
73614 Schorndorf
Germany

ProGram structure

LA00050 © LRP electronic GmbH 2012 The crossed-out wheeled bin means that within the European Union the product must be taken to separate
collection at product end-of life. Do not dispose these products as unsorted municipal waste.
quaDra coMpetition V1
orDer no. 41420
Dear customer,
thank you for your trust in this LRP product. By purchasing a Quadra Competition V1 you have
chosen a high-performance product which has the latest technology incorporated including
the following High-Tech features:
• Charge - Discharge - Cycle - Balance • LiPo • LiFePo • LiIo • NiMH • NiCd • Pb
• Integrated Balancer for 2S-6S Lixx packs • Dual Input (100-240Vac + 12Vdc)
• Blue backlit 16x2 LCD • 5 User Profile Memories
• Multi-Protection-System • Language selection
• USB Charge output • Software Update

tecHNIcaL Data

Dimensions 143x160x60mm Charge current 0.1-10.0A
Weight 620g Trickle current 0-300mA
11-18V [DC] Storage charge mode Yes
Input voltage range
100-240V [AC] Discharge power max. 25W
1-6 cells
Discharge current 0.1-5.0A
[LiPo/LiFe/LiIo]
1-15 cells Discharge cut-off
Charging capability 0.9-19.8V
[NiMH/NiCd] voltage
Delta peak cut-off
2 -20V [Pb] Yes, 5-200mV/pack
sensitivity
Charge power max. 80W Autostart timer Yes, 0-99[min]
Specifications subject to change without notice
coNNectIoNs & oPeratIoN
16x2 lcD screen
Active function Time elapsed
NiMH 5.0A 00m35s
+ current
08.58V 0048mAh
Voltage at out-
put connectors
Fast charger 100-240V ac / 12V Dc
charge Discharge cycle Balance
1-6 cell lixx
1-15 cells nicD/niMh
user Manual
Please read the following instructions carefully before you start using your LRP charger. This
user guide contains important notes for the installation, the safety, the use and the maintenan-
ce of this product. Thus protecting yourself and avoid damages of the product.
Proceed according to the user guide in order to understand your charger better. Please take
your time as you will have much more joy with your product if you know it exactly.
This user manual shall be kept in a safe place. If another customer is using this product, this
manual has to be handed out together with it.
Cycle mode Yes (NiCd/NiMh) AC input connection
User Profile memory Yes, 5 Output connection
Safety timer Yes, 1-720min Internal cooling fan
Acoustic signal type Buzzer USB connection
LCD 16x2,
Display USB charge output
blue backlit
Buttons 4 Integrated balancer
Multi Protection
Yes Temperature Cut-off
System
pluggable DC input
DC input connection Updateability
wire
The Quadra Competition V1 was developed with the main objective placed on easy operation
of all features. Intuitive navigation by means of 4 buttons makes it very easy to use and the
2-line blue backlit LCD offers perfect, reliable control of all settings and functions.
Dc input:
connect to a suitable DC source with 11-18V, using the supplied connection wire.
caution: Be careful with correct polarity!
Red = Plus / Black = Minus
output jacket:
connect battery to the 4.0mm jacket, using supplied charge wires.
Balancer connector:
high-performance integrated Lixx balancer for 2S to 6S packs using EHR balancing connector.
Buttons (for DetaileD functions see flowchart):
MENU -> press: Scroll/navigate through the function list.
-> hold: Jump back to initial screen.
DEC (-) -> Decrese selected (blinking) value.*
INC (+) -> Increase selected (blinking) value.*
START/STOP -> Enter or select function / Start a program / Cancel a running program.
* Button has high-speed function for rapid setting (press and hold to change value faster).
since start
Capacity
temperature sensor (optional):
connect the optional temperature probe to measure the battery temperature.
usB charge output:
5V/1A USB charge output for electronic devices (mobile phones, etc.).
ac input:
connect to main power with 100-240V AC
caution: Do not alter the wire or connector as this will void your warranty!
usB connection - pc link:
used for upcoming firmware updates.
Internal SMPS plug
aligator clips with
4 mm plug
Yes
Yes
5V/1A
Yes, 2S-6S
Yes, 20-80°C
(optional)
Yes