How To Use - Electrolux EWIE08F3MMW Instruction Manual

29 electrolux operation
Quick start
Install the washing
machine
Load the laundry
Measure out the
detergent
Close the
machine door
Fix the drain pipe
Preparation:
1.Put down the drain pipe;
2.Connect the inlet pipe, turn on the tap;
3.Put the plug of the power strip into the socket;
4.Take out the coins and other things from the pocket, shake off the sediment
of the clothes.
The wash stops
When the wash stops, the buzzer will buzz continuously 6 times and then the
power will be automatically cut off.
Although the power can be cut off automatically, the power plug must be
pulled out as well for the safety.
Press the
[start/pause] key
Select the desired
program
Plug the power supply
Turn on the water tap

How to use

Program selection
1. Press [Power] button;
2. Select the water level and program;
3. Press [Start/Pause] button.
When washing process finished
1.The buzzer will buzz continuously for 6 times and then the power will be
automatically cut off;
2.Turn off the water tap.
3.Although the power can be cut off automatically, the power plug must be
pull out as well for the safety.
Alarm function when door opened
1.When washing or spinning, there will be E3 alarm while consumer opens the
lid, and if consumer closes the lid, the alarm will be released, and the machine
will the last selected program keep running.
2.When"Delay"starts, there will be "Delay" E3 alarm while consumer open the
lid, and if consumer close the lid, the alarm will be released, and to continue
the "Delay" function. But while the machine is running, if consumer open the
lid, there will be no alarm.
If the water level does not reach to the set level, the washing machine will
inlet water itself.
Close the top lid when machine is running during spin process, otherwise, it
will automatically stop working and send out abnormal warning.
The washer will not work when the filled water does not reach the set water
level.
how to use electrolux 30