Advertisement
TECHNICAL GUIDE
PARTS:
6
DATE DISK FOR UNIT'S DIGIT
7
DATE JUMPER FOR UNIT'S DIGIT
1.
Reassemble the DATE DISK FOR UNIT'S
DIGIT to the CALENDAR PLATE by setting
the assembling guide nick of DATE DISK
FOR UNIT'S DIGIT to the guide point on the
CALENDAR PLATE (near the 12H position)
as per left image.
2.
Please make sure that the DATE JUMPER
FOR UNIT'S DIGIT engages with the DATE
DISK FOR UNIT'S DIGIT properly.
PARTS:
11 CALENDAR PLATE
1.
Lubricate 2 points of the CALENDAR PLATE
as per left image, which touches with the
DATE DISKs.
Type of oil: AO-3 (2 parts)
11/21
Cal. 7T04A
Advertisement
