Philips CDR950 Instructions For Use Manual page 23

MENU MODE
4 Press EASY JOG/ENTER or ENTER on the remote control to
confirm.
The display will ask you to reconfirm your selection.
5 Press EASY JOG/ENTER or ENTER on the remote control to
reconfirm.
6 Press STORE/MENU to return to the submenu or STOP 9 to
exit.
Text Memory Review/Erase Text Memory
1 Select the MEMORY VIEW submenu.
MEMORY VIEW appears on the display.
2 Press EASY JOG/ENTER or ENTER on the remote control to
confirm.
3 Select the disc you wish to erase.
REM REC TIME TRACK TOTAL
1 2 3 4 5
DIGITAL I I
PROGRAM
OPTICAL I
CD RW
ANALOG
4 Press EASY JOG/ENTER or ENTER on the remote control to
confirm.
ERASE MEMORY appears on the display.
REM REC TIME TRACK TOTAL
1 2 3 4 5
DIGITAL I I
PROGRAM
OPTICAL I
CD
RW
ANALOG
5 Press EASY JOG/ENTER or ENTER on the remote control to
reconfirm.
6 Press the EASY JOG/ENTER key or ENTER on the remote
control to confirm the erasure of the text for that particular
disc.
7 Press STORE/MENU to return to the submenu or STOP 9 to
exit.
Note:
- If there are no discs in the memory, the message MEMORY
EMPTY appears on the display.
- When the text memory of your CDRecorder is full, the
message MEMORY FULL will appear, followed by
FINALIZE CD. If you want to add a CD to the list of
discs for which text is stored, you have to erase a disc from
this list or finalize another disc. ("for which text is stored")
- MEMORY FULL/FINALIZE CD may also appear when
unfinalizing a CDRW disc for which text was stored (see
'Unfinalizing CDRW discs'). The same action(s) should be
taken in order to obtain memory space.
24
REM TRACK TIME FADE STEP
MANUAL SYNC SCAN
SHUFFLE REPEAT TRACK ALL
REM TRACK TIME FADE STEP
SYNC
MANUAL SCAN
SHUFFLE REPEAT ALL
TRACK
Rename input source
1 Select the NAME SOURCE submenu.
NAME SOURCE appears on the display.
2 Press EASY JOG/ENTER or ENTER on the remote control to
confirm.
3 Select the input source you wish to (re)name.
4 Press EASY JOG/ENTER or ENTER on the remote control to
confirm.
5 Select the characters by rotating the EASY JOG/ENTER key
or by pressing the corresponding numeric/alphabet key on
the remote control.
6 Press EASY JOG/ENTER or ENTER on the remote control to
store the characters and move to the next cursor position.
7 Press STORE/MENU to store a name you have entered and
move to the next item in the sub menu.