Store Button - Philips CDC735 Owner's Manual

CDC735comb 4/9/99 5:39 PM
OPEN/CLOSE Button
5-DISC CAROUSEL CD CHANGER
POWER
STANDBY-ON
Button
PROG. Button
DISPLAY PROG. STORE

STORE Button

1 2 3
DISC
DISC Number
4 5
SKIP
(1-5) Buttons
1 2 3
TRACK
SKIP Button
5 6
4
7 9
8 REPEAT
TRACK
0
RANDOM
Number (0-9)
H BPLAY/PAUSEF G
C STOP
E D
PLAY/PAUSE
Button
STOP Button
ASMS
Buttons
Page 15
Program Tracks
You can program up to 32 tracks to
play in any order you choose. You
can program tracks while the disc
compartment is open.
OPEN/CLOSE
DISC SELECT
PLAY/PAUSE STOP
1 1
Press the STOP button to cancel the
DISC
current function.
SELECT
2 2
Button
Press the PROG. button. The display
shows PROG. and program step num-
ber (PROG. NO.) 1.
DISC
PROG.
1
3 3
Press the DISC number (1-5) button
or the SKIP button on the remote con-
trol or the DISC SELECT button on
the Compact Disc Changer to select
the disc that contains the first track
you want to program. The display
shows the selected disc. For example,
disc number 3.
DISC
PROG.
1
• Press the ASMS
ward or forward through the programmed sequence. Press the PLAY/PAUSE but-
ton to resume playback of the program.
• You can use audible search during programmed play. Details are on page 13.
• You cannot use the DISC SELECT button, the SKIP button, the DISC number (1-
5) buttons or the TRACK number (0-9) buttons during programmed playback.
• To stop programmed playback, press the STOP button, then press the PROG. but-
ton. PROG. disappears from the display. The program is stored until you turn off
the Compact Disc Changer or open the CD compartment.
To play a stored program again, press the STOP button to cancel the current
function. Then, press the PROG. button so PROG. appears on the display. Press
the PLAY/PAUSE button to begin playback.
• During Stop mode, you may review the tracks stored in a program. Press the
PROG. button so that PROG. appears on the display. Then, press the STORE
button repeatedly to advance through a display of the tracks. You can not do this
while the program is playing.
• To clear the program from memory, press the STANDBY-ON button to turn off the
Compact Disc Changer, or press the OPEN/CLOSE button to open the CD com-
partment.
Special Playback (cont'd)
4 4
Press the TRACK number buttons or the
ASMS H or G button to select the
track you want to play. The display shows
the selected track. For example, track
PROG.
5 5
Press the STORE button to store the dis-
played disc and track numbers in the first
memory position. The display changes to
TRACK PROG. NO.
TRACK 0 and PROG. NO. 2, indicating
you may store the next track. (The disc
number will not change.)
2 3 4 5
PROG.
6 6
Repeat steps 3-5 for each track you want
to program.
7 7
When you are finished storing tracks in the
TRACK PROG. NO.
program, press the PLAY/PAUSE button.
The Compact Disc Changer starts to play the
2 3 4 5 programmed tracks in the order you entered.
NOTES
H or G button during programmed playback to move back-
15
DISC TRACK PROG. NO.
1 2 3 5
4
DISC TRACK PROG. NO.
1 2 3 4 5