Advertisement
Rack Mount Installation
1- Remove and discard factory installed screws from both sides of rack chassis (Fig. 3a).
2- Install mounting brackets (A) on the left and right side of rack chassis using the four (4) flat head screws (B) (included) (Fig. 3b).
3- Place unit into desired EIA 19" rack position and secure with mounting screws (not included) (Fig. 3c).
Fig. 3a
Top
Front
Left
Remove
Wall Mount Installation
1- Install mounting brackets (A) on the left and right side of rack chassis using
four (4) flat head screws (B) (included) (Fig. 4a).
2- Place unit at desired location and secure with #6 size screws or larger (not included) (Fig. 4b).
Caution: It is necessary to make sure mounting screws are securely fastened
to a beam when installing the unit vertically.
Fig. 4
Fig. 4b
Fig. 4a
B
A
Altronix is not responsible for any typographical errors. Product specifications are subject to change without notice.
140 58th Street, Brooklyn, New York 11220 USA | phone: 718-567-8181 | fax: 718-567-9056
website: www.altronix.com | e-mail: info@altronix.com | Lifetime Warranty | Made in U.S.A.
IINetWaySP8A/NetWaySP16A
Mounting Options:
Fig. 3b
Top
Front
Left
B
Dotted lines indicate studs
behind sheetrock.
Fig. 3c
Top
Front Left
A
Shelf Installation
1- Position and affix rubber pads (C) (included) at each
corner on the bottom of the unit (Fig. 5).
2- Place unit in desired location.
The lightning flash with arrowhead symbol within an equilateral triangle
is intended to alert the user to the presence of an insulated DANGEROUS
VOLTAGE within the product's enclosure that may be of sufficient magnitude
to constitute an electric shock.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
E31Q
Mounting Hardware (Included):
Two (2) mounting brackets
A
Six (6) flat head screws
B
for mounting brackets.
Four (4) rubber pads.
C
Fig. 5
Left Side
C
Rubber
Pad
CAUTION: To reduce the risk of electric
shock do not open enclosure. There are no
user serviceable parts inside. Refer servicing
to qualified service personnel.
MEMBER
Advertisement
