Clock Setting; Timer Setting - SchaubLorenz MCCD-2616 User Manual

CLOCK SETTING

1. Press the "STANDBY" button to switch unit at standby mode.
2. Press the "CLOCK" button once to entry clock set mode. The display will show "24H" and
flashing.
3. Adjust time format ( 12H / 24H ) by pressing the "SKIP +" or "SKIP -" button.
4. Press the "CLOCK" button to confirm time format, display will show "AM 12:00" or "PM 12:00" if
12H format is set or "00:00" if 24H set.
5. Adjust hour by pressing the "SKIP +" or "SKIP -" button, press the "CLOCK" button to confirm.
6. Adjust minute by pressing the "SKIP +" or "SKIP -" button, press the "CLOCK" button to confirm.
Notes:
The unit display is dim when doing clock setting.

TIMER SETTING

Timer setting must be after completed clock setting.
1. Press the "STANDBY" button to switch unit at standby mode.
2. Press the "TIMER" button to enter timer set mode.
3. The display will show "TIMER ON", and AM 12:00 or PM 12:00 if 12H format is set or 00:00 if
24H is set.
4. Adjust hour by pressing the "SKIP +" or "SKIP -" button, press the "TIMER" button to confirm.
5. Adjust minute by pressing the "SKIP +" or "SKIP -" button, press the "TIMER" button to confirm.
6. The display will show "TIMER OFF", and AM 12:00 or PM 12:00 if 12H format is set or 00:00 if
24H is set.
7. Adjust hour by pressing the "SKIP +" or "SKIP -" button, press the "TIMER" button to confirm.
8. Adjust minute by pressing the "SKIP +" or "SKIP -" button, press the "TIMER" button to confirm.
9. The display shows input source by pressing "SKIP +" or "SKIP -" (Chose CD, iPod or Tuner).
Chose the input and press "TIMER" button to confirm the selection.
10.The display shows volume level by pressing "SKIP +" or "SKIP -" to adjust the volume level and press
"TIMER" button to confirm the selection.
11.After confirmation the unit display show "TIMER ON" TIME, "TIMER OFF" TIME, "INPUT SOURCE"
and "VOLUME LEVEL" and unit go to standby mode.
12.Press the "TIMER" button to cancel or activate timer on / off function.
13.If you want to adjust the timer, press and hold "TIMER" button for 2 sec. It returns to timer setting
mode. Follow steps from 4.
14.Press and hold the "PLAY / PAUSE" button over 5 sec. to cancel all clock or timer setting.
To set clock first and follow steps from 2.
OTHER FEATURES
E-10