Advertisement
Quick Links
Advertisement
Related Manuals for Zico ZI-9630
Summary of Contents for Zico ZI-9630
- Page 1 ZI-9630 Humidity & Temperature USB Data logger www.zicotech.com...
- Page 2 FEATURES Memory for 32,000 readings (16000 temperature 16,000 humidity readings) Dew point indication Status Indication USB Interface User-Selectable Alarm Analysis software Multi-mode to start logging Long battery life Selectable measuring cycle: 2s, 5s, 10s, 30s, 1m, 5m, 10m, 30m, 1hr, 2hr, 3hr, 6hr, 12hr, 24hr DISCRIPTION...
- Page 3 LED STATUS GUIDE Gr e e n LED Re d /Ye l l ow LED LED STATUS GUIDE LEDs Indication Action Both lights Start logging Replace battery Logging not download active the data Battery One green flash every 10 sec. * To start, hold the Logging, start button until...
- Page 4 Red single flash every 10 sec. * logging, it will -Logging, stop alarm for RH*** automatically. double No data will be flash every 10 sec. * lost. Replace -Logging, high battery alarm for RH*** download data Red single flash every 60 sec. Battery**** Yellow single flash every 10 sec.
- Page 5 ***When both temperature and relative humidity readings exceed alarm level synchronously, LED status indication For example: If there is only alternate every cycle. one alarm, the REC LED blinks for one cycle and alarm LED will blink for next cycle. If there are two alarms, REC LED will not blink.
-
Page 6: Specifications
SPECIFICATIONS Relative Overall Range 0 to 100% Humidity ±5.0% Accuracy (0 to 20 and 80 to 100%) ±3.5% Accuracy (20 to 40 and 60 to 80%) ±3.0% Accuracy(40 to 60%) Temperature Overall Range 70℃（-40 to 158℉） ±2℃ Accuracy(-40 to -10 and +40 to +70℃) ±1℃... -
Page 7: Battery Replacement
-35 to 80℃（-31to 176℉） Operating temperature Battery type 3.6V lithium(1/2AA)(SAFT LS14250, Tadiran TL-5101 or equivalent) Battery life 1 year(typ.) depending on logging rate, ambient temperature & use of Alarm LEDs 101x25x23mm (4x1x.9”)/ 172g Dimensions/We ight (6oz) BATTERY REPLACEMENT Only use 3.6V lithium batteries. Before replacing the battery, remove the model from the PC. - Page 8 4. Slide the data logger back into the casing until it snaps into place. Now the data logger is ready for programing. NOTE: Leaving the model plugged into the USB port for longer than necessary will cause some of the battery capacity to be lost.
- Page 9 Sensor Reconditioning Over time, the internal sensor may be compromised as a result of pollutants, chemical vapors, and other environmental conditions which lead inaccurate readings. To recondition the internal sensor, please follow the procedure below: Bake the Logger at 80°C (176°F) at<5%RH for 36 hours followed by 20-30°C (70-90°F) at>74%RH for 48 hour ( for re-hydration)