Digital Output, Night Mode - Philips - MX3600 User Manual

30 Digital Output, Night Mode

Digital Output
Set Digital Output according to your audio connection.
While playback is stopped, press SYSTEM MENU. Press ;
1
or - to select the
Press 9 repeatedly to select z z , then press : : .
2
DIGITAL OUTPUT will be selected. Press : : .
3
Press 9 or 8 to select ALL, PCM 96K, or PCM 48K, then
4
press OK.
G
Choose ALL if you used the DIGITAL OUT - COAXIAL or
OPTICAL jack on the DVD Receiver to connect to optional
audio equipment.
G
Choose PCM 96K if you connected the DVD Receiver to optional
audio equipment that is capable of processing sampling rates of 96
kHz.
G
Choose PCM 48K if you connected the DVD Receiver to optional
audio equipment that cannot process sampling rates over 48K.
Check the owner's manual of the optional audio equipment.
DIGITAL OUTPUT
NIGHT MODE
CENTER DELAY
REAR DELAY
TEST TONE
SPDIF/RAW OUTPUT
Press SYSTEM MENU to remove the menu.
5
Night Mode
Set Night Mode to On to level the volume during Disc playback. This
reduces the highs and lows of the volume.
While playback is stopped, press SYSTEM MENU. Press ;
1
or - to select the
Press 9 repeatedly to select z z , then press : : .
2
Press 9 to select NIGHT MODE, then press : : .
3
Press 9 or 8 to select ON or OFF, then press OK. OFF is
4
the default setting.
DIGITAL OUTPUT
NIGHT MODE
CENTER DELAY
REAR DELAY
TEST TONE
NIGHT MODE SET TO OFF
Press SYSTEM MENU to remove the menu.
5
icon.
ALL
PCM 96K
PCM 48K
OFF
icon.
OFF
ON
1,5
1,5
Helpful Hint
• You can activate Night Mode
quickly by pressing NIGHT on the
remote control.
1-4
1-4