Access Levels; Log On To The Control Unit (C.i.e.); How To Log On - Panasonic EBL128 Daily User's Manual

3. ACCESS LEVELS

INFORMATION ONLY
H4 Present system status
H6 Display faults
H9 Interlocking outputs and inputs
H10 Change password

4. LOG ON TO THE CONTROL UNIT (C.I.E.)

USER NAME
Up to ten users, 0 to 9 may be programmed. By default at delivery, three users are available:
 0 = Information only
 1 = Building officer
 2 = Service personnel
PASSWORD
Each user has a password for an access level, for example. "Information only", "Building officer" or "Service
personnel".

4.1. HOW TO LOG ON

a) Open the door. Press the button "Access".
b) On the keypad, press 0, 1, 2 - - 8 or 9 to select a user. Press "A".
c) Type the password for that user. (Six digits. * * * * * *)
After typing a correct password, the first option of the available menus will be displayed. This is a list in
which you can scroll.
For "0", Information only, no password is required.
DAILY USER´S MANUAL
BUILDING OFFICER
H1 Perform monthly test
H2 Disable or re-enable
H3 Set calendar and clock
H4 Present system status
H6 Fault acknowledge
H7 Perform zone test
H9 Interlocking outputs and inputs
H10 Change password
Described in this document
7
• •
EBL128 VERSION 2.2.X DOCUMENT NUMBER: MEW01786
SERVICE PERSONNEL
H1 Perform monthly test
H2 Disable or re-enable
H3 Set calendar and clock
H4 Present system status
H5 Service
H6 FAULT Acknowledge
H7 Perform zone test
H8 Maintenance
H9 Interlocking outputs and inputs
H10 Change password
•
REVISION: 1