Management - Draytek VIGORIPPBX 3510 SERIES User Manual

5 . 1 0 . 7 M a n a g e m e n
5 . 1 0 . 7 M a n a g e m e
This page allows you to manage the settings for access control, access list, port setup, and
SMP setup. For example, as to management access control, the port number is used to
send/receive SIP message for building a session. The default value is 5060 and this must
match with the peer Registrar when making VoIP calls.
Router Name
Allow management from the
Internet
Disable PING from the Internet
Access List
Default Ports
User Defined Ports
t
n t
Type in the router name provided by ISP.
Enable the checkbox to allow system administrators to
login from the Internet. There are several servers
provided by the system to allow you managing the
router from Internet. Check the box(es) to specify.
Check the checkbox to reject all PING packets from the
Internet. For security issue, this function is enabled by
default.
You could specify that the system administrator can
only login from a specific host or network defined in
the list. A maximum of three IPs/subnet masks is
allowed.
List IP - Indicate an IP address allowed to login to the
router.
Subnet Mask - Represent a subnet mask allowed to
login to the router.
Check to use standard port numbers for the Telnet and
HTTP servers.
Check to specify user-defined port numbers for the
241
VigorIPPBX 3510 Series User's Guide