Switch Mode; Setup Setting - Lark FreeCam 2.2 HD User Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
EN
Turning on your Car DVR:
Press POWER button to turn ON/ OFF the power; or connect to the car charger, it will turn on
automatically when the car starts.

Switch Mode:

There are 3 modes, including Video, Photo and Playback. Power on the DVR, press MODE to switch
Video/Photo/Playback mode.
3. Recording
DVR will enter into default recording mode when turn it on, the working indicator blinkers and
indicates that it is recording. The recorded file will be saved in the Micro SD Card automatically. Press
OK to stop recording or auto-ending when car stops, the indicator LED will stop blinker.
Attentions:
With higher resolution, the file is bigger and recording time length is shorter.
VIDEO Effect:
Turn on your Car DVR, stop recording. Press MENU enter into VIDEO Effect Menu, and select the
options by UP or DOWN, press OK enter into the sub-menu, select the options by UP or DOWN,
confirm by pressing OK, meanwhile settings finished, press MENU again to exit menu.
Resolution: Select [1080FHD 1920x1080 / 1080P 1440x1080 / 720P 1280x720 / WVGA 848x480 / VGA
640x480 / QVGA 320x240]
Loop recording: Select [Off / 3 Minutes / 5 Minutes/ 10 Minutes] to decide how long will be saved
per section AVI file.
Exposure: Select [+2.0 / +5/3 / +4/3 / +1.0 / +2/3 / +1/3+0.0 / -1/3 / -2/3 / -1.0 / -4/3 / -5/3 / -2.0]
Motion Detection: Select [On / Off ]
Record Audio: Select [On / Off ]
Date Stamp: Select [On / Off ]
G-Sensitivity: Select [Off / Low / Medium / High]

SETUP Setting:

Turn on your Car DVR, stop recording. Press MENU twice enter into SETUP Setting Menu, and select
the options by UP or DOWN, press OK enter into the sub-menu, select the options by UP or DOWN,
confirm by pressing REC, meanwhile settings finished, press MENU again to exit menu.
Date/Time: Set date
Auto Power off: [1 Minute / 2Minutes/3 Minutes/5Minutes/10Minutes]
Beep Sound: Select [On / Off ]
Language: Select [English/ French / Spanish / German / Italian / Simplified Chinese/ Traditional
Chinese/ Russian / Japanese ] one language for your request.
TV Mode: Select [PAL / NTSC]
Frequency: Select [50Hz/ 60Hz]
Screen Saver: Select[off/3 minutes/5 minutes/10 minutes]
Image rotation: Select [off / on]
Format: Select [Cancel / OK]
Default Setting: Select [Cancel / OK]
Version: Show you the FM version
5

Advertisement

Table of Contents
loading

Related Products for Lark FreeCam 2.2 HD

Table of Contents