Page 1 Operator’s MikroScan 7600PRO Manual Thermal Imager MIKRON INFRARED, INC. 16 THORNTON ROAD OAKLAND, NJ 07436, USA Tel: 1-201-405-0900 Fax: 1-201-405-0090 URL: http:\\www.mikroninfrared.com...
Page 3: Table Of Contents
On Board Image Processing Software —Standard Type Menu On Board Image Processing Software —Classic Type Menu 2.6 Camera Functions Button Control Features Main Menu Functions 2.7 Standard Camera Accessories Section 3 Getting Started 3.1 Charging the Batteries 3.2 Connecting the Power Supply 3.2.1 Before You Begin 3.2.2 Attaching the Battery Pack 3.2.3 Connecting the AC Adapter 3.3 Handling the Lens Protection Cap 3.3.1 Removing the Lens Cap 3.3.2 Attaching the Lens Cap 3.4 Handling the Memory Card 3.4.1 Inserting the Memory Card MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 4 3.4.2 Removing the Memory Card 3.5 Viewing Your First Image 3.6 Accessing the MikroScan 7600PRO Expanded Menu Functions 3.6.1 Using the Standard Type Navigational Structure 3.6.2 Using the Classic Type Navigational Structure 3.7 Working with the LCD Display 3.8 Selecting a Lens Option 3.9 Customizing your MikroScan 7600PRO 3.9.1 Establishing the Initial Setup Values 3.9.1.1 Selectng the Temperature Unt 3.9.1.2 Customzng the Memory Card Fle Name 3.9.1.3 Settng the Auto Mode Functon 3.9.1.4 Settng the Language 3.9.1.5 Actvatng the IEEE 1394 Functonalty 3.9.1.6 Settng the Date Format 3.9.1.7 Settng the Date 3.9.1.8 Settng the Tme 3.9.1.9 Dsplayng the Date and Tme 3.9.1.10 Selectng a Navgatonal Structure 3.9.2 Establishing the Save Setup Values 3.9.2.1 Selectng a Voce Memo Recordng Opton...
Page 5 3.11 Information on the MikroScan 7600PRO Firmware Version 3.12 Finishing Section 4 Basic Operation 4.1 Toggling between the Run and Freeze Modes 4.1.1 Switching to Freeze Mode 4.1.2 Returning to Run Mode 4.2 Using the Power Standby Mode 4.2.1 Working with the Power Standby ON Function 4.2.2 Working with the Power Standby Auto Function 4.3 Selecting the Temperature Range and Mode 4.3.1 Selecting the Temperature Range (Option 1) 4.3.2 Selecting the Temperature Range Mode Setting 4.4 Switching Between Ranges 4.4.1 Using the Manual Range Formatting Option with L/S Link 4.5 Working with the Color Palette Options 4.5.1 Choosing a Color Palette 4.5.2 Switching between the Color and Monochrome Display 4.5.2.1 Usng the Standard Type Menu 4.5.2.2 Usng the Classc Type Menu 4.6 Adjusting the Focus...
Page 6 Section 5 Images and Image Files 5.1 Working with the Save Function 5.1.1 Saving Image Data as .SIT Files 5.1.2 Saving Image Data as .BMP Files 5.1.3 Adding a Voice Memo to a New Image 5.2 Reviewing Saved Images using the MikroScan 7600PRO 5.2.1 Reviewing .SIT Images Using the Replay File Feature 5.2.2 Reviewing .BMP Images Using the Replay File Feature 5.2.3 Reviewing Images Using the Thumbnail Feature. 5.3 Working with Images Stored to Real-Time Memory 5.3.2 Saving RTM Images to the Compact Flash Memory Card 5.3.2.1 Savng Indvdual Image Frames as .SIT Fles 5.3.2.2 Savng Indvdual Image Frames as .BMP Fles 5.3.2.3 Usng the RTM Save All Feature 5.4 Using the Memory Card Management Options 5.4.1 Making Directories 5.4.2 Selecting Directories 5.4.3 Deleting Files 5.4.4 Renumbering Files...
Page 7 6.8.2 Fitting the Composite Image 6.9 Working with the Multi Sense Display Settings 6.10 Working with the ISO Thermal Function 6.10.1 Customizing the Range of a Single ISO Thermal Band 6.10.2 Adding Multiple ISO Thermal Bands 6.10.3 Modifying Existing ISO Thermal Bands 6.10.4 Erasing an Individual ISO Thermal Band 6.10.5 Erasing all ISO Thermal Bands 6.11 Working with the Wave Function 6.12 Working with the Event Functions 6.12.1 Setting the Event Condition 6.12.2 Selecting a Range Area 6.12.3 Choosing to Display an Alarm Warning Message 6.12.4 Choosing to Sound an Audible Warning 6.12.5 Choosing to Freeze Measurements 6.12.6 Saving Measurements to a Compact Flash Card MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 8 7.3.2 Activating the IEEE 1394 Functionality 7.4 Calibrating the Instrument 7.4.1 Performing a REF CAL (Reference Calibration) 7.4.2 Performing a ERSP CAL (External Response Calibration) 7.5 Returning all Settings to Default Values Section 8 Principle of Thermal Imaging 8.1 Infrared Radiation 8.2 Emissivity 8.3 Blackbody Radiation 8.4 Blackbody Type Source and Emissivity 8.5 Determining Emissivity 8.6 Background Noise 8.7 Practical Measurement 8.8 Emissivity of Various Materials MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 9 Section 9 Appendix 9.1 After Use Care 9.2 Maintenance 9.3 Troubleshooting Symptoms 9.4 Troubleshooting Error Messages 9.5 MikroScan 7600PRO Specifications Index MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 10 To ensure consistent document formatting, this page was intentionally left blank MikroScan 7600PRO v Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 11: General Information
Ths may cause damage to the product. 1.3 Operator Training To best understand and utlze the measurements and mages derved from the operation of this instrument, the operator should understand the basics of heat transfer and nfrared radaton theory. Notes on these bascs can be found n Secton 8 of ths manual. Education and training in these subjects should be provided by qualified per- sonnel. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 12: Precautions
5) Do not operate the camera n an enclosed case. Flammable gas generated by the battery may catch fire from sparks generated from a motor or switch, etc. 6) Do not nstall the battery termnals (+) and (-) n reverse. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 13: Cable, Adapter, Cord
6) Do not use or store the instrument for extended periods in direct, ntense sunlght or n a locaton subject to extreme ncreases n temperature (e.g. n a car). 7) Do not use or store the nstrument n extremely dusty envronments. 8) Do not use or store the nstrument n the presence of strong electro- magnetic fields, if possible. 9) Do not use or store the nstrument under wet condtons such as rain or snow unless the hatch, terminal cover and battery have been secured. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 14: Warranty
However, there is no guarantee that interference will not occur in a particular installa- ton. General conditions of operation. (a) Persons operatng ntentonal or unntentonal radators shall not be deemed to have any vested or recognzable rght to contnued use of any gven frequency by vrtue of pror regstraton or certification of equipment, or, for power line carrier systems, on the basis of prior notification of use pursuant to Sec. 90.63(g) of ths chapter. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 15: Unpacking And Inspection
2) Carefully unpack and inspect all components for visible damage. 3) Save all packing materials, including the carrier’s identification codes, until you have inspected all components and find that there is no obvious or hidden damage. Before shipment, the camera was assembled, calibrated, and tested at the Mikron Factory. If you note any damage or suspect damage, immediately contact the carrier and Mkron. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 16: Procedure For Factory Repair And Return
Shipping documents must state in English “Goods originated in the USA being returned temporarily for repairs.” If shipped by a company other than UPS or FedEx, address shipment to Mikron Infrared, Inc. c/o Shenkers Custom Brokers. Failure to comply wth these nstructons wll result n U.S. Customs and Import dutes beng added to the repar cost. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 17: Introduction
IEEE 1394 (Frewre®) nterface. Completely self-contaned n a dust proof and splash proof case, the MikroScan 7600 PRO not only meets IP54 specifications, but it also offers a shock rating of 30G (IEC60068-2-27) and a vibration rating of 3G (IEC60068-2-6), making it the perfect imager for the even the most extreme of environ- ments.
Page 18: Construction
AC Adapter Power Led Power Switch Key Panel Grip belt Hook Grip belt Hook Removal button for Compact Flash Memory Card Video Output terminal Compact Flash Memory Card Slot Ieee1394 Interface MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 19: Construction
Introduction Section 2 2.2 Construction Viewfinder Hand Grip belt Camera Features (Side) Infrared Lens Focusing Ring Viewfinder Camera Features LCd display (Side) Rear Cover Microphone Speaker for Voice Memo Function MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 20: Key Panel Functions
Saves the current mage data n ether the (S) SAVe “run” or “freeze” modes. Automatically optimizes the focus, sensitivity, (A) AutO and temperature level for the current dsplay. Used to cancel out of certan menu functons. (C) CAnCeL/VISIbLe Also used to dsplay the vsble lght mage. Places the nstrument n the mage and data (R) Run/FRz acquisition mode. Also used to “freeze” the dsplayed mage and data and certan menu functons. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 21: Camera Interfaces
The power swtch on the MkroScan Power Swtch 7600PRO swtches the camera between two settings: ON and OFF. The IEEE 1394 (Frewre) nterface IEEE 1394 (Frewre) Interface allows remote camera control, image capture, and process analysis using software runnng on a Wndows-based PC. Insert Compact Flash Memory Card for Memory Card Expanson Slot storage and retreval of mages. The Composte Vdeo Output nterface Analog Composte Vdeo Output Connector allows transmsson of analog vdeo sgnals over a cable to a montor. Ths allows vdeo nformaton to be carred as a sngle sgnal n ether NTSC or PAL format. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 22: On Board Image Processing Software
2.5 On Board Image Processing Software emissivity date/time Run/Freeze Mode Cursor Point Image display temperature Range Color Palette bar Page MikroScan 7600PRO Display Screens Main display--Run Mode Main display with Standard type Menu Main display with Classic type Menu MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 23: On Board Image Processing Software -Standard Type Menu
Introduction Section 2 On Board Image Processing Software —Standard Type Menu Main display with Measure Sub-Menu Main display with display Sub-Menu MikroScan 7600PRO MikroScan 7600PRO Display Screens—Standard Display Screens—Standard Type Menu Type Menu Main display with File Sub-Menu Main display with Cal Sub-Menu Main display with Setup Sub-Menu MikroScan 7600PRO Operator’s Manual...
Page 24: On Board Image Processing Software -Classic Type Menu
Main display with display Sub-Menu Main display with Measure Sub-Menu MikroScan 7600PRO Display Screens—Classic Type Menu Main display with Replay Sub-Menu Main display with File Sub-Menu Main display with Setup Sub-Menu Main display with Standby Sub-Menu MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 25: Camera Functions
Function Dsplays the mage and mage data n [RUN/FREEZE] “real-time”. Also used to “freeze” the dsplayed mage and data. [AUTO] The MikroScan 7600PRO includes an auto processing feature, which automati- cally focuses the camera and optimizes the temperature level and sensitivity ranges for the target being monitored. Provdes electronc focusng functonalty. [FOCUS]...
Page 26 Introduction Section 2 In addton to vewng pont temperature [POInt eMISS] data, the MikroScan 7600PRO also allows you to establsh ndvdual emssvty values for one or more ponts and to obtan nformaton on how the tempera- tures of the varous ponts are affected by dfferences n emssvty settngs. Used to determine the Max, Min, and Avg. [bOx] temperatures within a specified area of a thermal mage. When creatng a box on a thermal image, the max, min, and avg.
Page 27 (This determnes an event condton based on the maxmum or mnmum temperature on a thermal image, unless the threshold value is specified otherwise. When a BOX setup is set, it judges using the maximum or mnmum temperature of the box wthn the lmts). MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 28 [WHOLe] tons are determned on the entre thermal mage. Allows you to automatcally lnk the vs- [SAVe VISIbLe] ble lght data wth the thermal data when savng an event to the memory card. The nstrument wll only record the ther- [OFF] mal mage and mage data when an event condton s trggered. The nstrument wll record to the memory [IR LInK] card, the visible light image along with the thermal mage and mage data as a single .sit file when an event condition is trggered. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 29 AGC is displayed in the upper-rght corner of the screen. Allows you to establsh certan dsplay [DISPLAY MENU] optons. Allows you to dsplay a vsble mage. [VISIbLe IMAGe] [COMPOSIte Creates a thermal/visual composite image. IMAGe dISPLAy] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 30 (256, 128, 64, colors. 32, 16) Reverse monochrome settngs. [MOnO neGA] Used to select the desred number of (256, 128, 64, colors. 32, 16) Isothermal bands can be set n the color [ISOtHeRMAL] dsplay. A maxmum of four (4) sother- mal bands can be set. Isothermal bands can be set wthn the temperature range of the color bar but not n full scale of the Temperature Ranges 1 or 2. The Isother- mal dsplay s a very useful tool for notc- ng abnormal temperature areas on the measurng object. Isothermal Band. [bAnd A] Isothermal Band. [bAnd b] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 31 There- fore renumber the files in order from 0001. Swtches between the root drectory or [dIReCtORy] subdrectores stored on the CF card. Creates a subdrectory under the root [neW dIR] drectory of the CF card. Allows you to save data prevously stored [SAVe ALL] n the camera’s nternal memory to the CF card. Performs settngs about adjustment pro- [CAL MENU] cessng. Adjusts the detected temperature cor- [ReF CAL] respondng to the measurement envron- ment. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 32 Allows you to establsh certan user env- [SETUP MENU] ronment settngs. Performs ntal settngs for the camera.. [InItIAL Menu) [teMP unIt] Defines the desired temperature unit. [°C] Used to display temperature in degrees Celsius. [°F] Used to display temperature in degrees Fahrenheit. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 33 SenSItIVIty the temperature level and span. LeVeL/SPAn] [LAnGuAGe] The various functions of the MikroScan 7600PRO can be displayed in a number of different languages including English, Japanese, German, French, Spanish, and Portuguese. [Ieee 1394] Sets support option for IEEE 1394 con- nectivity.
Page 34 This option enables the voice annotation feature of the MikroScan 7600PRO.. [OFF] This option disables the voice annota- tion feature of the MikroScan 7600PRO (default). [SAVe FORMAt] Allows you to choose to save images in either a .BMP or a .SIT format.
Page 35 UFPA by the reference black- body source. Also an internal accurate thermometer monitors the temperature of the reference blackbody source and cali- brates the unit during the NUC Operation. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 36 Allows you to choose whether or not to display the color bar. [On] This option enables the display of the color bar (default). [OFF] This option disables the display of the color bar. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 37 Allows you to set the camera to automati- cally enter standby mode based on a pre- established time interval. [StAndby nOW] Allows you place the camera in standby mode. [VeRSIOn) Displays information pertaining to the camera’s firmware version. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 38: Standard Camera Accessories
Introduction Section 2 2.7 Standard Camera Accessories AC Adapter Battery Charger (2) Battery Packs Neck Strap Lens Protection Cap MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 39: Getting Started
Once that battery is Once that battery is fully charged, the sec- fully charged, the sec- ond battery will begin ond battery will begin charging. charging. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 40: Connecting The Power Supply
Although there are several optonal power supply accessores avalable for your MikroScan 7600PRO, the standard power supply options supplied with your camera nclude the AC Adapter and two battery packs. Ths secton wll cover the steps neces- sary for usng these standard power supply optons. 3.2.1 Before You Begin Before applying any power source to your MikroScan 7600PRO, it is important that the power swtch on the camera be n the off poston. Step 1 Step 2 I = on position O = off position 1) Open the hatch cover on the back of the camera.
Page 41: Attaching The Battery Pack
Getting Started Section 3 3.2.2 Attaching the Battery Pack Before attaching the battery pack to your MikroScan 7600PRO, it is important that the power swtch on the camera be n the off poston. Step 1 Step 2 Step 3 1) Open the terminal cover. 2) Position the fully-charged battery pack over the latch on the terminal side of the camera as indicated by the arrow in Step 2 above. 3) Push the battery pack forward until it snaps into position as indicated in Step 3 above. 3.2.3 Connecting the AC Adapter Before connecting the AC Adapter to your MikroScan 7600PRO, it is important that the power swtch on the camera be n the off poston.
Page 42: Handling The Lens Protection Cap
Getting Started Section 3 3.3 Handling the Lens Protection Cap Your MkroScan 7600PRO was shpped wth a lens protecton cap whch was desgned specifically for the MikroScan 7600PRO. The lens protecton cap not only offers protec- ton to the camera lens, but it can also be used for performing a reference calibration of the camera (See Secton 6.5.2 for more nformaton regardng on calbratng the nstru- ment). When camera opera- When camera opera- tion has been completed, tion has been completed,...
Page 43: Handling The Memory Card
Before inserting or removing the memory card, it is important that the power switch on Card Management Options. Card Management Options. the camera be n the off poston. 3.4.1 Inserting the Memory Card 1) Remove the memory card from the Compact Flash Adapter. 2) Turn the memory card so that the connecting pins are vertically aligned with the Memory Card Expansion Slot on the Camera. 3) Insert the memory card until you hear a click. 3.4.2 Removing the Memory Card 1) Push the release button located at the bottom of the Memory Card Expansion Slot to release the memory card. 2) Pull the memory card from the camera. 3) Insert the memory card into the Compact Flash Adapter. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 44: Viewing Your First Image
ng the software version, the color palette bar, and the progress of the system check n the form of a blue dotted lne. Palette bar Camera Software Version System Check Initialization in Progress Once the initialization process has been completed, the camera enters the run mode and the dsplay changes to show addtonal nformaton on the varous camera settngs as well as the scene towards whch the camera s ponted. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 45: Accessing The Mikroscan 7600Pro Expanded Menu Functions
The first is the Standard Type menu option, which provides the navigational structure located at the top of the display. The second s the Classc Type menu opton whch provdes the navgatonal structure along the rght sde of the dsplay. To access the menu functions of the 7600PRO, you will be working with the jOyStICK and the jOyStICK [e] buttOn...
Page 46: Using The Classic Type Navigational Structure
Initial Setup menu. the Initial Setup menu. See section 3.9.1.10 See section 3.9.1.10 for more information for more information on setting the type of on setting the type of menu structure. menu structure. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 47 Getting Started Section 3 3) Toggle the button down to expose the drop-down list of jOyStICK menu functions. [Menu LISt exPOSed 4) Toggle the button up or down as needed to highlight the jOyStICK desired main menu choices. [MAIn Menu CHOICe HIGHLIGHted] 5) Toggle the button to the left to highlight the sub-menu jOyStICK choices. [Sub-Menu CHOICe HIGHLIGHted] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 48: Working With The Lcd Display
3.7 Working with the LCD Display The MikroScan 7600PRO allows you to view images through the viewfinder or on the flip-out LCD display. The camera is supplied with an autoswitch function which will NOTE: NOTE:...
Page 49: Selecting A Lens Option
Refer to your lens docu- Refer to your lens docu- mentation for selecting the mentation for selecting the appropriate lens option. appropriate lens option. A bar wll appear at the bottom of the screen showng the current lens option: 4) Toggle the up or down if needed until the desired option jOyStICK has been selected. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 50: Customizing Your Mikroscan 7600Pro
CAnCeL/VISIbLe and to return to the main display. 3.9 Customizing your MikroScan 7600PRO The MikroScan 7600PRO provides environment setup options, which allow you to setup, change, save and recall different camera configurations based on your selections. 3.9.1 Establishing the Initial Setup Values 3.9.1.1 Selecting the Temperature Unit...
Page 51 Classic View Menu 2) Press the button to gain access to the jOyStICK [e] INITIAL SET UP Menu 3) Toggle the up or down if needed to highlight jOyStICK [TEMP UNIT] [teMP unIt HIGHLIGHted] 4) Toggle the to the right to highlight the jOyStICK TEMP UNIT option. [teMP unIt OPtIOn HIGHLIGHted] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 52: CustomZNg The Memory Card FLe Name
To establish a new four-character file name prefix: 1) Go to → → [MENU] [SET UP] [INITIAL] [InItIAL HIGHLIGHted] [InItIAL HIGHLIGHted] Standard View Menu Classic View Menu 2) Press the button to gain access to the INITIAL SET UP jOyStICK [e] Menu MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 53 Getting Started Section 3 3) Toggle the up or down if needed to highlight jOyStICK [FILE NAME] [FILe nAMe HIGHLIGHted] 4) Toggle the to the right to highlight the first character of jOyStICK the file name. [FILe nAMe CHARACteR HIGHLIGHted] 5) Toggle the up or down as needed to scroll through the jOyStICK characters to select a letter in the A-Z range or a number in the 0-9 range. [FILe nAMe CHARACteR CHAnGed] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 54 Getting Started Section 3 6) Toggle the to the right to highlight the next character of jOyStICK the file name. [FILe nAMe CHARACteR HIGHLIGHted] 7) Repeat steps 5 and 6 until you have selected and/or changed all the desired file name values. [FILe nAMe CHARACteRS CHAnGed] 8) Press the button to save the setting and to return to jOyStICK [e] the main display. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 55: SettNg The Auto Mode FunctOn
To set the auto mode function: 1) Go to → → [MENU] [SET UP] [INITIAL] [InItIAL HIGHLIGHted] [InItIAL HIGHLIGHted] Standard View Menu Classic View Menu 2) Press the button to gain access to the INITIAL SET UP jOyStICK [e] Menu MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 56 [AutO MOde OPtIOn HIGHLIGHted] 5) Toggle the up or down as needed to select the desired jOyStICK auto mode option. The auto mode options are: • FuLL (deFAuLt) • FOCuS • LeVeL & SenSe or (LeVeL & SPAn) 6) Press the button to lock the setting and to return to jOyStICK [e] the main display. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 57: SettNg The Language
→ → [MENU] [SET UP] [INITIAL] [InItIAL HIGHLIGHted] [InItIAL HIGHLIGHted] Standard View Menu Classic View Menu 2) Press the button to gain access to the jOyStICK [e] INITIAL SET UP Menu 3) Toggle the up or down if needed to highlight jOyStICK [LANGUAGE] [LAnGuAGe HIGHLIGHted] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 58: ActVatNg The Ieee 1394 FunctOnalTy
(Firewire®) feature of this camera. camera. 3.9.1.5 Activating the IEEE 1394 Functionality The IEEE 1394 (Frewre®) feature of the MkroScan 7600PRO provdes remote camera control functonalty and real-tme data acquston and analyss through the IEEE 1394 nterface. See Workng wth Communcaton Interfaces found n Secton 7.3 of ths manual for more nformaton on settng up the IEEE 1394 (Firewire®) feature of this camera. 3.9.1.6 Setting the Date Format The date and tme functon of the MkroScan 7600PRO sets the nternal clock for the camera. The date and tme s saved as part of the image file and can be viewed on the display. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 59 Classic View Menu 2) Press the button to gain access to the jOyStICK [e] INITIAL SET UP Menu. 3) Toggle the up or down as needed to highlight jOyStICK [DATE FORMAT] [dAte FORMAt HIGHLIGHted] 4) Toggle the to the right to highlight the DATE FORMAT jOyStICK option. [dAte FORMAt OPtIOn HIGHLIGHted] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 60: SettNg The Date
[MENU] [SET UP] [INITIAL] [InItIAL HIGHLIGHted] [InItIAL HIGHLIGHted] Standard View Menu Classic View Menu 2) Press the button to gain access to the jOyStICK [e] INITIAL SET UP Menu 3) Toggle the up or down as needed to highlight jOyStICK [SET DATE] [Set dAte HIGHLIGHted] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 61: SettNg The TMe
6) Toggle the to the right to highlight the next set of jOyStICK variables. 7) Repeat steps 5 and 6 above to set the remaining variables. 8) Press the button to save the setting and to return to jOyStICK [e] the main display. 3.9.1.8 Setting the Time 1) Go to → → [MENU] [SET UP] [INITIAL] [InItIAL HIGHLIGHted] [InItIAL HIGHLIGHted] Standard View Menu Classic View Menu MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 62 [SET TIME] jOyStICK [Set tIMe HIGHLIGHted] 4) Toggle the to the right to highlight the first set of jOyStICK variables. [tIMe VARIAbLe SeLeCted] 5) Toggle the up or down as needed to increase or decrease jOyStICK the numeric value of the selected variable. The variable options appear in the following order: • HH/MM/SS: (hour, minute, second) 6) Toggle the to the right to highlight the next set of jOyStICK variables. [tIMe VARIAbLe SeLeCted] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 63: DSplayNg The Date And TMe
[MENU] [SET UP] [INITIAL] [InItIAL HIGHLIGHted] [InItIAL HIGHLIGHted] Standard View Menu Classic View Menu 2) Press the button to gain access to the jOyStICK [e] INITIAL SET UP Menu 3) Toggle the up or down as needed to highlight jOyStICK [DISPLAY TIME] [dISPLAy tIMe HIGHLIGHted] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 64: SelectNg A NavGatOnal Structure
See Section 3.6 of this man- See Section 3.6 of this man- ual for more information on ual for more information on Accessing the MikroScan Accessing the MikroScan 7600PRO Expanded menu 7600PRO Expanded menu functions. functions. Standard View Menu Classic View Menu...
Page 65 [OPeRAtIOn HIGHLIGHted] 4) Toggle the to the right to highlight the OPERATION jOyStICK option. [OPeRAtIOn OPtIOn HIGHLIGHted] 5) Toggle the up or down as needed to select the desired jOyStICK option. OPERATION The operation options are: • StAndARd tyPe (default) • CLASSIC tyPe 6) Press the button to save the setting and to return to jOyStICK [e] the main display. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 66: Establishing The Save Setup Values
Adding a Voice Standard View Menu Classic View Menu Memo to a New Image.. Memo to a New Image.. 2) Press the button to gain access to the jOyStICK [e] SAVE SET UP Menu [SAVe SetuP Menu] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 67 4) Toggle the to the right to highlight the voice memo jOyStICK options. [VOICe MeMO OPtIOn HIGHLIGHted] 5) Toggle the up or down as needed to select the desired jOyStICK voice memo option. [VOICe MeMO OPtIOn HIGHLIGHted] The voce memo options are: • OFF (deFAuLt) • On 6) Press the button to lock the setting and to return to jOyStICK [e] the main display. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 68: SelectNg The Image Save Format
Getting Started Section 3 3.9.2.2 Selecting the Image Save Format T he MkroScan 7600PRO allows mages to be stored to the memory card in the MikroScan 7600PRO file format utilizing the file .SIt extension or as a bitmap file with the file extension. .bMP When the mage s saved wth the extension, it is saved in a full .SIt 14-bt dgtal format and ncludes all the data assocated wth the...
Page 69: SelectNg The VSBle Save OptOn
• bMP 6) Press the button to lock the setting and to return to jOyStICK [e] the main display. 3.9.2.3 Selecting the Visible Save Option NOTE: NOTE: T he MkroScan 7600PRO allows vsble mages to be vewed and saved wth ther thermal mage counterparts. These vsble lght See Section 5 of this manual See Section 5 of this manual mages can be revewed through the MkroScan 7600PRO or for more information on Im- for more information on Im- transferred along wth all other mage data to an external computer. ages and Image Files.
Page 70 Classic View Menu 2) Press the button to gain access to the SAVE SET UP jOyStICK [e] Menu 3) Toggle the up or down to highlight from jOyStICK SAVE VISIBLE the list of menu choices. [SAVe VISIbLe HIGHLIGHted] 4) Toggle the to the right to highlight the save visible jOyStICK options. [SAVe VISIbLe OPtIOn HIGHLIGHted] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 71: Establishing The Analyze Setup Values
Working with the tion on Working with the settngs. The Mult-Pont Temperature Dsplay Optons can be used Multi-Point Temperature Multi-Point Temperature n ether the or modes. FReeze Display Options. Display Options. The Multi-Point Temperature Display offers four mode choices: MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 72 To set the multipoint display mode: 1) Go to → → [MENU] [SETUP] [ANALYZE] [AnALyze HIGHLIGHted] [AnALyze HIGHLIGHted] Standard View Menu Classic View Menu 2) Press the button to gain access to the ANALYZE SET jOyStICK [e] Menu [AnALyze Set uP Menu] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 73 • teMP (deFAuLt) when the emissivity of the point • teMP & eMISS is different from the emissivity • teMP of the whole screen. • teMP & eMISS MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 74: ActVatNg/DeactVatNg The Box Temperature OptOn
[e] the main display. 3.9.3.2 Activating/Deactivating the Box Temperature Option The MikroScan 7600PRO allows you to define up to five box- shaped regions of interest within the field of view. These boxes can be displayed with the maximum, minimum, and average tempera- ture within the defined box region of interest.
Page 75 4) Toggle the to the right to highlight the box temp options. jOyStICK [bOx teMP OPtIOn HIGHLIGHted] 5) Toggle the up or down as needed to select the desired box jOyStICK temp option. [bOx teMP OPtIOn HIGHLIGHted] The box temp options are: • On (deFAuLt) • OFF 6) Press the button to lock the setting and to return to jOyStICK [e] the main display. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 76: Establishing The Display Setup Values
FReeze mode. The non unformty correcton (detector [AutO] stablzaton) wll be performed at prees- tablshed tme ntervals whle the camera s operatng n the mode. To set the NUC Mode: 1) Go to → → [MENU] [SETUP] [DISPLAY] [dISPLAy HIGHLIGHted] [dISPLAy HIGHLIGHted] Standard View Menu Classic View Menu MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 77 Section 3 2) Press the button to gain access to the DISPLAY SET jOyStICK [e] Menu [dISPLAy SetuP Menu] 3) Toggle the up or down, if needed, to highlight NUC MODE jOyStICK from the list of menu choices. [nuC MOde HIGHLIGHted] 4) Toggle the to the right to highlight the NUC mode jOyStICK options. [nuC MOde OPtIOn HIGHLIGHted] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 78 The NUC mode options are: • MAnuAL (deFAuLt) • AutO Settng the Manual NUC mode opton 1) Follow steps 1-5 for Setting the NUC (Non Uniformity Correction) Mode in Section 3.9.4.1 of this manual. 2) Select from the list of mode options MANUAL [MAnuAL nuC MOde OPtIOn HIGHLIGHted] 3) Press the button to lock the setting and to return to jOyStICK [e] the main display. When the manual NUC mode operation has been selected, the nstrument wll perform a non unformty correcton (detector stablzaton) whenever the dsplay changes to the Run mode. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 79: SettNg The L&S (Level & SensTVTy Or Level & Span) Mode
Span, and Sensitivity.. The first option is to make adjustments to the level of sensitiv- ty. The level of senstvty determnes the nstrument’s ablty to resolve adjacent areas of dfferent temperatures wthn the overall scene. Snce only a small porton of the whole temperature range is used for viewing, it is often necessary to increase or decrease the ntervals of the temperature scale by adjustng the Senstvty Level. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 80 → [MENU] [SETUP] [DISPLAY] [dISPLAy HIGHLIGHted] [dISPLAy HIGHLIGHted] Standard View Menu Classic View Menu 2) Press the button to gain access to the DISPLAY SET jOyStICK [e] Menu 3) Toggle the up or down, if needed, to highlight SET L&S jOyStICK from the list of menu choices. [Set L&S HIGHLIGHted] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 81: SettNg The Threshold For SpatAl FLterNg
5) Toggle the up or down as needed to select the desired jOyStICK L&S option. [L&S OPtIOn HIGHLIGHted] The Set L&S options are: • LeVeL & SenSe (deFAuLt) • LeVeL & SPAn 6) Press the button to lock the setting and to return to jOyStICK [e] the main display. 3.9.4.3 Setting the Threshold for Spatial Filtering The Spatal Flterng feature of the MkroScan 7600PRO allows an addtonal level of mage smoothng to a thermal mage whle the nstrument s n Freeze mode. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 82 [dISPLAy HIGHLIGHted] Standard View Menu Classic View Menu 2) Press the button to gain access to the DISPLAY SET jOyStICK [e] Menu 3) Toggle the up or down to highlight from the jOyStICK FILTERING list of menu choices. [FILteRInG HIGHLIGHted] 4) Toggle the to the right to highlight the filtering options. jOyStICK [FILteRInG OPtIOn HIGHLIGHted] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 83: ClearNg/ShowNg DSplay Elements
• Select a threshold from 0.1°C to 5.0°C (32.2°F to 41°F) with the step of 0.1°C (.1°F) 6) Press the button to lock the setting and to return to jOyStICK [e] the main display. 3.9.4.4 Clearing/Showing Display Elements The All Clear feature of the MkroScan 7600PRO allows you to focus solely on the mage by hdng all dsplay elements other than the logo. [ALL CLeAR FunCtIOn ACtIVAted] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 84 Standard View Menu Classic View Menu 2) Press the button to gain access to the DISPLAY SET jOyStICK [e] Menu 3) Toggle the up or down to highlight from the ALL CLEAR jOyStICK list of menu choices. [ALL CLeAR HIGHLIGHted] 4) Toggle the to the right to highlight the All Clear options. jOyStICK [ALL CLeAR OPtIOn HIGHLIGHted] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 85 3) Press the to lock the setting and to return to the main jOyStICK display. [ALL CLeAR FunCtIOn ACtIVAted] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 86 Standard View Menu Classic View Menu 2) Press the button to gain access to the jOyStICK [e] DISPLAY SET Menu 3) Toggle the up or down to highlight from the jOyStICK ALL CLEAR list of menu choices. [ALL CLeAR HIGHLIGHted] 4) Toggle the to the right to highlight the All Clear options. jOyStICK [ALL CLeAR OPtIOn HIGHLIGHted] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 87: ClearNg/ShowNg The Status Bar
[MENU] [SETUP] [DISPLAY] [dISPLAy HIGHLIGHted] [dISPLAy HIGHLIGHted] Standard View Menu Classic View Menu 2) Press the button to gain access to the jOyStICK [e] DISPLAY SET Menu 3) Toggle the up or down to highlight from the jOyStICK STATUS BAR list of menu choices. [StAtuS bAR HIGHLIGHted] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 88 [StAtuS bAR OPtIOn HIGHLIGHted] The status bar display options are: • On (deFAuLt) • OFF 6) Press the button to lock the setting and to return to jOyStICK [e] the main display. Although the Status Bar OFF opton wll clear the status bar elements from the display, these elements are only hidden and can be accessed n the same manner as when they are actvely dsplayed. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 89: ClearNg/ShowNg The Color Bar
Standard View Menu Classic View Menu 2) Press the button to gain access to the jOyStICK [e] DISPLAY SET Menu 3) Toggle the up or down to highlight from the jOyStICK COLOR BAR list of menu choices. [COLOR bAR HIGHLIGHted] 4) Toggle the to the right to highlight the color bar display jOyStICK setup option. [COLOR bAR OPtIOn HIGHLIGHted] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 90: ClearNg/ShowNg The Battery Status IndCator
3.9.4.7 Clearing/Showing the Battery Status Indicator 1) Go to → → [MENU] [SETUP] [DISPLAY] [dISPLAy HIGHLIGHted] [dISPLAy HIGHLIGHted] Standard View Menu Classic View Menu 2) Press the button to gain access to the DISPLAY SET jOyStICK [e] Menu MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 91 4) Toggle the to the right to highlight the battery indicator jOyStICK display option. [bAtteRy OPtIOn HIGHLIGHted] 5) Toggle the up or down as needed to select the desired jOyStICK option. [bAtteRy OPtIOn HIGHLIGHted] The battery indicator display options are: • On (deFAuLt) • OFF 6) Press the button to lock the setting and to return to jOyStICK [e] the main display. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 92: SettNg The Tv System (VDeo Output Mode)
nclude 480 ndvdual rows of pxels. Section 7.2 of this manual for more information on The 7600PRO offers two scanning modes. The first is the default setting up the TV Scan- non-interlace mode. With the non-interlace mode of scanning, the ning Mode feature for this whole frame s panted at one tme wth each lne beng scanned n camera.
Page 93 [LCd bRIGHt OPtIOn HIGHLIGHted] 5) Toggle the up or down as needed to change the LCD jOyStICK Bright option. The LCD Bright options are: • 0: (dark) • 1: (middle) [deFAuLt] • 2: (bright) 6) Press the button to lock the setting and to return to jOyStICK [e] the main display. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 94: Establishing The Auto Standby Parameters
Getting Started Section 3 3.9.5 Establishing the Auto Standby Parameters In addton to a manual standby mode as descrbed n Secton 4.2.1 NOTE of this manual, the MikroScan 7600PRO also provides an automatic standby feature whch s used to conserve battery power and to All camera settings are elmnate detector stablzaton tme when makng ntermttent saved when the instru- measurements. ment is in standby mode. 3.9.5.1 Activating the Auto Standby Feature 1) If using the Standard Type Menu, go to → →...
Page 95 [e] Mode [AutO StAndby MOde SCReen] A bar wll appear at the bottom of the screen showng the current auto standby settng. 3) Toggle the up or down as needed to select jOyStICK AUTO STANDBY [ON]. [AutO StAndby On HIGHLIGHted] 4) Toggle the to the right to highlight the AUTO STANDBY jOyStICK set time option. [AutO StAndby On OPtIOn HIGHLIGHted] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 96: DeactVatNg The Auto Standby Feature
Standby mode for an extended period of time as it will eventually de- plete the battery charge. • Be sure to turn the power button off when the measurements have been Standard View Menu completed. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 97 [AUTO] [AutO StAndby HIGHLIGHted] Classic View Menu 2) Press the button to gain access to the jOyStICK [e] AUTO STANDBY Mode [AutO StAndby MOde SCReen] A bar wll appear at the bottom of the screen showng the current auto standby settng. 3) Toggle the up or down as needed to select AUTO jOyStICK STANDBY [OFF]. [AutO StAndby OFF HIGHLIGHted] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 98: Working With Configuration Files
CONFIGURATION button to jOyStICK [e] over write the existing [SAVe COnFIGuRAtIOn SCReen] file, You can press the CAn- button CeL/VISIbLe [C] to cancel the request and select another configura- tion file number. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 99 You can ether press the button jOyStICK [e] to over write the existing file, You can press the CAnCeL/VISIbLe [C] button to cancel the request and select another configuration file number. 4) Press the button to save the setting and to return to jOyStICK [e] the main display. Press the button to cancel out of the auto CAnCeL/VISIbLe [C] standby mode and to return to the main display. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 100: Loading A Saved Configuration File
2) Press the button to gain access to the jOyStICK [e] LOAD CONFIGU- Mode RATION [LOAd COnFIGuRAtIOn SCReen] 3) Toggle the up or down to select a configuration file jOyStICK number from 1 to 10. [LOAd COnFIG FILe nuMbeR] 4) Press the button to save the setting and to return to jOyStICK [e] the main display. Press the button to cancel out of the auto CAnCeL/VISIbLe [C] standby mode and to return to the main display. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 101: Information On The Mikroscan 7600Pro Firmware Version
Getting Started Section 3 3.11 Information on the MikroScan 7600PRO Firmware Version To access nformaton on the MkroScan 7600PRO Frmware Version: 1) Go to → → [MENU] [SETUP] [VERSION] [VeRSIOn HIGHLIGHted] [VeRSIOn HIGHLIGHted] Standard View Menu Classic View Menu 2) Press the button to gain access to the jOyStICK [e] VERSION Display Screen [VeRSIOn dISPLAy SCReen] 3) Press the button to return to the main display. jOyStICK [e] 3.12 Finishing...
Page 102 Getting Started Section 3 To ensure consistent document formatting, this page was intentionally left blank MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 103: Basic Operation
• Emissivity • Emissivity [RUN/FRZ] Mode. • Focus • Focus • Gain Control • Gain Control 2) Verify is highlighted at the upper right hand corner of the [Run] • Lens Assembly • Lens Assembly display and that the time clock has restarted. • Range • Range [FReeze HIGHLIGHted] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 104: Using The Power Standby Mode
Standby mode, the Power LED will flash rapidly. completed. completed. 3) Press any key to cancel the standby mode and to return to normal operation. The nstrument wll go through the system check and normal operaton wll resume after approxmately 20 seconds. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 105: Working With The Power Standby Auto Function
1) Verify the camera is operating in mode. [Run] 2) Go to → → [MENU] [MEASURE] [RANGE] [RAnGe HIGHLIGHted] [RAnGe HIGHLIGHted] Standard View Menu Classic View Menu 3) Press the button to select the temperature RANGE jOyStICK [e] function. [RAnGe SeLeCted] A bar wll appear at the bottom of the screen showng the current temperature range option: MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 106 500°C (932°F), while the the main display. Minimum Temperature Minimum Temperature Level for Range 2 is 0° Level for Range 2 is 0° [RAnGe PROCeSSInG MeSSAGe] (32°F). (32°F). A message wll appear at the bottom of the dsplay ndcatng that the temperature range request s processng. Press the button to cancel out of the menu CAnCeL/VISIbLe [C] mode and to return to the main display. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 107: Selecting The Temperature Range Mode Setting
RANGE [RAnGe MOde SeLeCted] 3) Toggle the up or down if needed until the desired tem- jOyStICK perature mode has been selected. RANGE [RAnGe MOde SeLeCted] The two temperature range modes are • FIxed • L/S LInK (LeVeL/SenS LInKInG MOde) 4) Press the button to save the setting and to return to jOyStICK [e] the main display. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 108: Switching Between Ranges
500°C (932°F), while the Minimum Temperature Minimum Temperature Level for Range 2 is 0° Level for Range 2 is 0° (32°F). (32°F). 2) While in , Toggle the up until the temperature RANGE 1 jOyStICK level exceeds the upper limit of RANGE 1 [RAnGe PROCeSSInG MeSSAGe] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 109 Level for Range 2 is 0° Level for Range 2 is 0° (32°F). (32°F). The screen wll freeze momentarly whle the nstrument s processng the range change. Once the processng has been completed the temperature range scale will reflect the fact that the camera s now operatng n RAnGe 1. [RAnGe 1] RAnGe 1 -40°C tO 120°C (-40°F tO 248°F) MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 110: Working With The Color Palette Options
1) Go to → → [MENU] [DISPLAY] [COLOR] [COLOR HIGHLIGHted] [COLOR HIGHLIGHted] Standard View Menu Classic View Menu 2) Press the button to gain access to the jOyStICK [e] COLOR SET UP Mode [PALette SeLeCtIOn] [SPeCtRuM CHOICe] A bar wll appear at the bottom of the screen showng the dsplay’s current color palette selecton and spectrum choce. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 111 HIGHLIGHted SPeCtRuM CHOICe LAbeL] 5) Toggle the up or down as needed to select the color jOyStICK spectrum. The spectrum choices are: • SHIne (deFAuLt) • FIne • RAInbOW • bRIGHtneSS • HOt IROn • MedICAL 6) Press the button to lock the setting and to return to jOyStICK [e] the main display. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 112: Switching Between The Color And Monochrome Display
4.5.2.1 Using the Standard Type Menu 1) Press and hold the button to gain access to the jOyStICK [e] MikroScan 7600PRO quick menu functions. 2) Press the button again until the color bar becomes jOyStICK [e] highlighted on the display. [HIGHLIGHted COLOR PALette bAR] 3) Toggle the up or down as needed to toggle between the jOyStICK color display and the monochrome display [HIGHLIGHted COLOR PALette bAR] 4) Press the button to lock the setting and to return to jOyStICK [e] the main display. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 113: UsNg The ClassC Type Menu
Section 4 4.5.2.2 Using the Classic Type Menu 1) Press the button to activate the display functions. jOyStICK [e] 2) Toggle the left or right as needed to highlight the palette jOyStICK bar. [HIGHLIGHted COLOR PALette bAR] 3) Toggle the up or down as needed to toggle between the jOyStICK color display and the monochrome display [HIGHLIGHted COLOR PALette bAR] 4) Press the button to lock the setting and to return to jOyStICK [e] the main display. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 114: Adjusting The Focus
Switching between a on Switching between a [FOCuS IndICAtOR bAR] Color an Monochrome Color an Monochrome Display. Display. [neAR] [FAR] 4) Toggle the upward to increase the focal distance. jOyStICK [FOCuSInG IndICAtOR bAR] Togglng the joystck upward wll move the blue focus ndcator bar toward the far focus range of infinity. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 115: Using The Focus Indicator Bar With The Classic Type Menu
See Section 4.6.2 ing. See Section 4.6.2 for more information for more information on Switching between a on Switching between a Color an Monochrome Color an Monochrome Display. Display. [FOCuS IndICAtOR bAR] [neAR] [FAR] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 116 Basic Operation Section 4 4) Toggle the upward to increase the focal distance. jOyStICK [FOCuSInG IndICAtOR bAR] Togglng the joystck upward wll move the blue focus ndcator bar toward the far focus range of infinity. Toggle the downward to decrease the focal distance. jOyStICK [FOCuSInG IndICAtOR bAR] Togglng the joystck upward wll move the blue focus ndcator bar toward the near focus range of 50 cm. 5) Press the button to lock the setting and to return to jOyStICK [e] the main display. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 117: Manual Focusing
(See Sections 4.3 and 4.4 (See Sections 4.3 and 4.4 of this manual for more of this manual for more information on tempera- information on tempera- ture ranges). ture ranges). before Adjustment After Adjustment MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 118: Adjusting The Temperature Span
2) Toggle the to the right to increase the upper limit jOyStICK temperature value. Toggle the to the left to decrease the upper limit jOyStICK temperature value. [teMPeRAtuRe SPAn] [teMPeRAtuRe SPAn] before Adjustment After Adjustment MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 119: Adjusting The Sensitivity
In step 5 of Setting the L&S, be sure to select [LeVeL & SenSItIVIty] [LeVeL & SenSItIVIty SeLeCted] 2) Toggle the to the right to increase the intervals of the jOyStICK temperature scale. Toggle the to the left to decrease the intervals of the jOyStICK temperature scale. [SenSItIVIty] [SenSItIVIty] before Adjustment After Adjustment MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 120: Using The Auto Processing Functions
3) Verify the camera is operating in mode (See Section 4.1 of [Run] this manual for more information on Toggling between the Run and Freeze Modes). 4) Press the button AutO The screen wll freeze momentarly whle the nstrument s auto processing. Once auto processing has been completed, the dsplay wll once agan appear n mode. [Run] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 121: Performing The Auto Focus Function
Sensitivity function Sensitivity function can be performed in can be performed in both both FReeze FReeze modes. modes. Note: Whether the Auto Mode function affects the Level & Span OR the Level & Senstvty s determned by the L/S opton that s selected n dsplay setup menu. See Secton 3.9.4.2 of ths manual for more nformaton on selectng the desred L/S opton. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 122: Working With The Averaging Function (S/N Improvement)
To set the image averaging function: 1) Go to → → [MENU] [MEASURE] [AVERAGE] [AVeRAGe HIGHLIGHted] [AVeRAGe HIGHLIGHted] Standard View Menu Classic View Menu 2) Press the button to select the option. jOyStICK [e] AVERAGE [AVeRAGe SeLeCted] A bar wll appear at the bottom of the screen allowng you to select the desred mage averagng opton. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 123: Working With The Image Zoom Function
To set the image zoom: 1) Go to → → [MENU] [DISPLAY] [ZOOM] [zOOM HIGHLIGHted] [zOOM HIGHLIGHted] Standard View Menu Classic View Menu MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 124 [e] [zOOM SeLeCted] A bar wll appear at the bottom of the screen allowng you to select the desred mage zoom opton. The digital image zoom options are: • x2 • x4 3) Toggle the up or down as needed to scroll through the jOyStICK image zoom options. 4) Press the button to select the desired setting and to jOyStICK [e] return to the main display. Press the button to cancel out of the menu CAnCeL/VISIbLe [C] mode and to return to the main display. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 125: Using The Memo Function
s stored onto the memory card and then accessed by utlzng the memo functon of the camera. [MeMO CHARACteR/SyMbOL LISt] ” & ’ < > ¥ °C °F 4.13.1 Creating a Memo using the Character Input Method 1) Go to → → [MENU] [DISPLAY] [MEMO] [MeMO HIGHLIGHted] [MeMO HIGHLIGHted] Standard View Menu Classic View Menu MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 126 To enter a space between characters, use the box symbol found at the begnnng of the character/symbol lst. Once a single character has been entered, the input cursor moves to the next poston. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 127 Press the button to cancel out of the function CAnCeL/VISIbLe [C] and to return to the main display. b) Press the button to acknowledge that you want to jOyStICK [e] clear the memo and return to the main display MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 128: Adding Multiple Memos Using The Character Input Method
MEMO jOyStICK [e] [MeMO] Upon completion of step 2, a box will appear on the display contanng the character/symbol lst. [MeMO] 3) Toggle the button up or down as needed to choose the jOyStICK ◊ Input Cursor Movement Label InPut CuRSOR MOVeMent LAbeL InPut CuRSOR MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 129 Once a single character has been entered, the input cursor subsequent images will subsequent images will moves to the next poston. contain the same memo. contain the same memo. 10) Repeat steps 8 and 9 above until all characters have been entered. CHARACteR InPut CuRSOR MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 130: Applying A Memo Designation Using The File Selection Method
• Memos can only be created • Memos can only be created a .csv or .txt file extension. utilizing the same characters utilizing the same characters as found in the MikroScan as found in the MikroScan → → 2) Go to...
Page 131: Changing A Memo
The text of the memo will appear in a fixed position at the top of the dsplay screen. The text and locaton of the memo wll reman n the camera’s memory untl t s deleted. (See Secton 4.13.5.1 for nformaton on deletng ndvdual characters n a memo and See Secton 4.13.5.2 for deletng an entre memo from the dsplay.) 4.13.4 Changing a Memo → → 1) Go to [MENU] [DISPLAY] [MEMO] [MeMO HIGHLIGHted] [MeMO HIGHLIGHted] Standard View Menu Classic View Menu MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 132 InPut CuR- 6) Press the button to go back to the box of symbols/characters. SAVe MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 133 Once the replacement character has been entered, the input cur- sor moves to the next position. 9) Repeat steps 7 and 8 above until all characters have been changed or deleted. InPut CuRSOR MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 134: Deleting An Memo Designation
[e] clear the memo and return to the main display. 4.13.5 Deleting an Memo Designation 4.13.5.1 Deleting a Single Character 1) Go to → → [MENU] [DISPLAY] [MEMO] [MeMO HIGHLIGHted] [MeMO HIGHLIGHted] Standard View Menu Classic View Menu MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 135: V15.4F
InPut CuRSOR 4) Press the button to enter the cursor movement mode. SAVe The hghlghted box dsplayed on the screen can now be moved to any part of the dsplay by togglng the jOyStICK [e] down, left or right. This highlighted box is referred to as the InPut CuRSOR. 5) Toggle the button left or right as needed to move the jOyStICK along the horizontal plane to position the box over InPut CuRSOR the character that needs to be deleted. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 136 8) Toggle the button up or down as needed to scroll through jOyStICK the list of characters/symbols to select the space designator. SPACe deSIGnAtOR 9) Press the button to replace the character with a space. SAVe Once a single character has been entered, the memo nput cursor moves forward to the next poston. 10) Repeat steps 4-9 above for deletion of additional characters. 11) Press the button to save the remaining characters and jOyStICK [e] to return to the main display. [MeMO CLeARed] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 137: DeletNg All Characters At Once
[MeMO HIGHLIGHted] [MeMO HIGHLIGHted] Standard View Menu Classic View Menu 2) Press the button to select the option. MEMO jOyStICK [e] [MeMOS] Upon completion of step 2, a box will appear on the display contanng the character/symbol lst. [MeMO] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 138 Basic Operation Section 4 3) Press the button. CAnCeL/VISIbLe [C] [CLeAR MeMO MeSSAGe] A message will appear at the bottom of the screen confirming the deleton request. 4) Press the button to clear all memos and to return to jOyStICK [e] the main display. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 139: Images And Image Files
5) Make any desired adjustments to the temperature range setting or display while the image display while the image temperature level and sensitivity. (See Sections 4.4 through 4.10 of is being saved. is being saved. this manual for more information on these settings). MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 140 [VOICe MeMO ReCORdInG MeSSAGe] 6. The visible image can not 6. The visible image can not be displayed if the ambient be displayed if the ambient temperature becomes more temperature becomes more than 45°C during continuous than 45°C during continuous operation. operation. To save the mage wthout a voce annotaton memo: Press the button. CAnCeL/VISIbLe [C] To save the mage wth a voce annotaton memo: Follow the steps outlined in Section 5.1.3 entitled Adding a Voice Memo to a New Image. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 141: Saving Image Data As .Bmp Files
6) Focus the camera. (See Section 4.6 for more information for 6. The visible image can not 6. The visible image can not Adjusting the Focus of the camera). be displayed if the ambient be displayed if the ambient temperature becomes more temperature becomes more 7) Press the button. than 45°C during continuous than 45°C during continuous SAVe operation. operation. [SAVe bItMAP MeSSAGe] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 142: Adding A Voice Memo To A New Image
When an image is being saved to the memory card, an image file is created which contains the image, the voce memo, and all other data associated with the image. These voice files can be replayed on the MkroScan 7600PRO or transferred along wth all other mage data to an external computer. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 143 2) Verify that the Format has been selected in the Save Setup .SIT Menu (Refer to Section 3.9.2.2 of this manual for information on Selecting the Image Save Format.) [.SIt OPtIOn SeLeCted] 3) Verify that has been selected as the option in the VOICe MeMO Save Setup Menu (Refer to Section 3.9.2.1 of this manual for infor- mation on Selecting the Voice Memo Recording Option.) [VOICe MeMO On SeLeCted] 4) Open the LCD Display to expose the speaker microphone on the side of the camera. 5) Press the button. SAVe [VOICe MeMO ReCORdInG MeSSAGe] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 144 [e] A sngle beep wll ndcate the start of the recordng process along wth a message at the bottom of the dsplay ndcatng the recordng functon s n progress. 7) Speak slowly and clearly into the microphone. LCd display Microphone Speaker After approximately 10 seconds, two short beeps will sound ndcatng the recordng functon has ended. To cancel the voice annotation prematurely: Press the button. CAnCeL/VISIbLe [C] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 145: Reviewing Saved Images Using The Mikroscan 7600Pro
5.2.1 Reviewing .SIT Images Using the Replay File Feature 1) Follow steps 1-6 of Section 5.4.2 (entitled Selecting Directories) to select the desired directory. 2) If using the Standard Type Menu, go to → → [MENU] [FILE] [SIT FILE] [SIt FILe HIGHLIGHted] Standard View Menu If using the Classic Type Menu, go to → → [MENU] [REPLAY] [SIT FILE] [SIt FILe HIGHLIGHted] Classic View Menu MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 146 7) Press the button again to review any visible CAnCeL/VISIbLe [C] light image or composite image that had been saved with the ther- mal image. 8) Press the button to return the camera to Run Mode. [Run/FRz] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 147: Reviewing .Bmp Images Using The Replay File Feature
5.2.2 Reviewing .BMP Images Using the Replay File Feature 1) Follow steps 1-6 of Section 5.4.2 (entitled Selecting Directories) to select the desired directory. 2) If using the Standard Type Menu, go to → → [MENU] [FILE] [BMP FILE] [bMP FILe HIGHLIGHted] Standard View Menu If using the Classic Type Menu, go to → → [MENU] [REPLAY] [BMP FILE] [bMP FILe HIGHLIGHted] Classic View Menu MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 148 Once a saved .BMP image has been placed on the display, you can revew the assocated vsble mage by pressng the button. CAnCeL/VISIbLe [C] 6) Press the button to review any visible light CAnCeL/VISIbLe [C] image or composite image that had been saved with the .bmp image. 7) Press the button to return the camera to Run Mode. [Run/FRz] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 149: Reviewing Images Using The Thumbnail Feature
Images and Image Files Section 5 5.2.3 Reviewing Images Using the Thumbnail Feature. 1) Follow steps 1-6 of Section 5.4.2 (entitled Selecting Directories) to select the desired directory. 2) If using the Standard Type Menu, go to → → [ [MENU] [FILE] THUMBNAIL] [tHuMbnAIL HIGHLIGHted] Standard View Menu If using the Classic Type Menu, go to → → [MENU] [REPLAY] [THUMBNAIL] [tHuMbnAIL HIGHLIGHted] Classic View Menu MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 150 Images and Image Files Section 5 3) Press the button to freeze the display and gain access jOyStICK [e] to the Display THUMBNAIL [tHuMbnAIL dISPLAy] 4) Toggle the to the left or right as needed to scroll through jOyStICK the individual thumbnails on the page. [tHuMbnAIL HIGHLIGHted] 5) Toggle the up or down as needed to scroll through the jOyStICK thumbnail pages. [neW tHuMbnAIL HIGHLIGHted] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 151: Working With Images Stored To Real-Time Memory
5.3 Working with Images Stored to Real-Time Memory In addition to saving images to a compact flash card, your MikroScan 7600PRO also has the capability of recording real-time image sequences to its internal memory. These image sequences can then be played back and reviewed using your MikroScan 7600PRO.
Page 152: Saving Rtm Images To The Compact Flash Memory Card
[Run/FRz] 5.3.2 Saving RTM Images to the Compact Flash Memory Card Images captured through the real-tme memory functon can be saved to the memory card as either .SIT files or as .BMP files. A file name s automatcally assgned to each mage showng the four- character file prefix, the image number, and the selected file type extenson. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 153: SavNg IndVDual Image Frames As .Sit FLes
[.SIt OPtIOn SeLeCted] 4) Follow steps 1-5 in Section 5.3.1 of this manual to review and select the desired image frame that had been stored in real-time memory. 5) Press the button. SAVe If the Voce Memo Recordng opton has been actvated (see Secton 3.9.2.1 for more nformaton on Selectng the Voce Memo Recording Option), a message will appear at the bottom of the dsplay ndcatng that the button needs to jOyStICK [e] be pressed to begn the recordng functon (See Secton 5.1.3 for more nformaton on workng wth Voce Memos). [VOICe MeMO ReCORdInG MeSSAGe] To save the mage wthout a voce annotaton memo: MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 154: SavNg IndVDual Image Frames As .Bmp FLes
[.bMP OPtIOn SeLeCted] 4) Follow steps 1-5 in Section 5.3.1 of this manual to review and select the desired image frame that had been stored in real-time memory. 5) Press the button. SAVe [SAVe bItMAP MeSSAGe] Once the button has been pressed, a SAVe SAVE BITMAP message wll appear at the bottom of the screen offerng you the choce of savng the mage as a file or canceling out of the .BMP save btmap functon. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 155: UsNg The Rtm Save All Feature
The 7600PRO provides a real-time memory save all feature, which allows you to select all frames or certain image sets to be stored to the compact flash memory card. The amount of data that can be...
Page 156 6) Toggle the up or down if needed to select the desired jOyStICK frame as a start point for saving image data to the compact flash card. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 157 Also note that you can not cancel out of this function once you have begun saving the image frames. 9) Press the button to save the image frames to the jOyStICK [e] memory card. You can not cancel out of this function once it has begun saving the image frames. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 158: Using The Memory Card Management Options
5.4 Using the Memory Card Management Options The MikroScan 7600PRO provides a number of memory card management options, which allow you to make directories as well as renumber and delete image files. 5.4.1 Making Directories 1) Go to →...
Page 159: Selecting Directories
First 6 Digits Last 2 Digits represent the represent the Although the 7600PRO Although the 7600PRO creation date directory number firmware allows you to create firmware allows you to create directories it does not allow...
Page 160 Although the 7600PRO Although the 7600PRO firmware allows you to create firmware allows you to create directories it does not allow...
Page 161: Deleting Files
DELETE The delete feature will The delete feature will [CARd deLete MeSSAGe] only function with the only function with the MikroScan 7600PRO MikroScan 7600PRO native .SIT files or native .SIT files or .BMP files. All other .BMP files. All other...
Page 162 9b) Press the button to cancel out of the DELETE CAnCeL/VISIbLe [C] that are currently dis- that are currently dis- mode and to return to the main display. FILE played on the screen. played on the screen. 10) Press the button to return the camera to Run Mode [Run/FRz] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 163: Renumbering Files
(e.g. TH910123. name. (e.g. TH910123. SIT or TH910456. SIT or TH910456. Press the button to cancel out of the RENUM- CAnCeL/VISIbLe [C] BMP. BMP. mode and to return to the main display. BER FILE 5) Press the button to return the camera to Run Mode [Run/FRz] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 164: Formatting The Memory Card
(including files cre- (including files cre- ated on devices other ated on devices other than the MikroScan than the MikroScan 7600PRO). 7600PRO). A message bar will appear at the bottom of the screen, asking you to confirm your choice.
Page 165: Working With Memory Card Error Messages
Inserting the Memory Card). dAtA MISS-MAtCH The data is not Reformat the memory compatible with the card using the method 7600PRO file structure. described in Section 5.4.5 - Formatting the Memory Card. FuLL There is no more space Make more space on the memory card.
Page 166 Images and Image Files Section 5 To ensure consistent document formatting, this page was intentionally left blank MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 167: Data Analysis
Standard View Menu Classic View Menu 3) Press the button to gain access to the AMBIENT jOyStICK [e] Display. COMPENSATION [AMbIent COMPenSAtIOn dISPLAy] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 168: Setting Ambient Compensation Using The Parameter Mode
[SETUP from the list of menu choices. MODE] [SetuP MOde HIGHLIGHted] 5) Toggle the to the right to highlight the SETUP MODE jOyStICK options. [SetuP MOde OPtIOn HIGHLIGHted] 6.1.2 Setting Ambient Compensation Using the Parameter Mode 1) Follow steps 1-5 for Accessing the Ambient Compensation Mode Settings (See Section 6.1.1 of this manual). 2) Toggle the up or down, if needed, to highlight jOyStICK [PARAM] from the list of menu choices. [PARAM. MOde OPtIOn HIGHLIGHted] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 169: SettNg The AtmospherC Temperature Value
1) Follow steps 1-3 for Setting Ambient Compensation Using the the ambient compensation the ambient compensation Parameter Mode (See Section 6.1.2 of this manual). mode. mode. 2) Toggle the up or down, if needed, to highlight jOyStICK from the list of menu choices. [ATMOSPHERIC TEMP] [AtMOSPHeRIC teMP Set] 3) Toggle the to the right to highlight the ATMOSPHERIC jOyStICK value. TEMP. [AtMOSPHeRIC teMP VALue] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 170 ATMOSPHERIC TEMP. [AtMOSPHeRIC teMP VALue CHAnGed] The compensation value will automatically reflect the adjust- ments made to ths parameter. 5) Toggle the to the left to set the ATMOSPHERIC TEMP jOyStICK value and return to the list of displayed options. [AtMOSPHeRIC teMP VALue Set] Press the button to save the setting and to return to jOyStICK [e] the main display. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 171: SettNg The RelatVe HumDTy Value
4) Toggle the up or down, as needed to increase or decrease jOyStICK the value. RELATIVE HUMIDITY [ReLAtIVe HuMIdIty VALue CHAnGed] The compensation value will automatically reflect the adjust- ments made to ths parameter. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 172: SettNg The Object DStance
[ReLAtIVe HuMIdIty VALue Set] Press the button to save the setting and to return to jOyStICK [e] the main display. 6.1.2.3 Setting the Object Distance 1) Follow steps 1-3 for Setting Ambient Compensation Using the Parameter Mode (See Section 6.1.2 of this manual). 2) Toggle the up or down, if needed, to highlight jOyStICK from the list of menu choices. [OBJECT DISTANCE] [ObjeCt dIStAnCe HIGHLIGHted] 3) Toggle the to the right to highlight the OBJECT jOyStICK value. DISTANCE [ObjeCt dIStAnCe VALue HIGHLIGHted] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 173 6.1.4 of this manual for 6.1.4 of this manual for information on turning off information on turning off the ambient compensation the ambient compensation mode. mode. Press the button to save the setting and to return to jOyStICK [e] the main display. [AMbIent MOde ACtIVAted] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 174: Setting Ambient Compensation Using The Value Mode
Section 6 6.1.3 Setting Ambient Compensation Using the Value Mode 1) Follow steps 1-5 for Accessing the Ambient Compensation Mode Settings (See Section 6.1.1 of this manual). 2) Toggle the up or down, if needed, to highlight [VALUE] jOyStICK from the list of menu choices. [VALue MOde OPtIOn HIGHLIGHted] 3) Toggle the to the left to set the mode and return jOyStICK VALUE to the list of displayed options. [VALue MOde Set] Press the button to save the setting and to return to jOyStICK [e] the main display. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 175: SettNg The AtmospherC Temperature Value
6.1.4 of this manual for information on turning off information on turning off the ambient compensation the ambient compensation mode. mode. 4) Toggle the up or down, as needed to increase or decrease jOyStICK the value. ATMOSPHERIC TEMP. [AtMOSPHeRIC teMP VALue] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 176: SettNg The CompensatOn Value
[AtMOSPHeRIC teMP VALue Set] Press the button to save the setting and to return to jOyStICK [e] the main display. 6.1.3.2 Setting the Compensation Value 1) Follow steps 1-3 for Setting Ambient Compensation Using the Value Mode (See Section 6.1.3 of this manual). 2) Toggle the up or down, if needed, to highlight jOyStICK from the list of menu choices. [COMPENSATION VALUE] [COMPenSAtIOn VALue HIGHLIGHted] 3) Toggle the to the right to highlight the COMPENSATION jOyStICK VALUE [COMPenSAtIOn VALue HIGHLIGHted] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 177 6.1.4 of this manual for 6.1.4 of this manual for information on turning off information on turning off the ambient compensation the ambient compensation mode. mode. Press the button to save the setting and to return to jOyStICK [e] the main display. [AMbIent MOde ACtIVAted] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 178: Deactivating The Ambient Compensation Mode
[MENU] [CAL] [AMBIENT] [AMbIent HIGHLIGHted] [AMbIent HIGHLIGHted] Standard View Menu Classic View Menu 3) Press the button to gain access to the jOyStICK [e] AMBIENT Display. COMPENSATION [AMbIent COMPenSAtIOn dISPLAy] 4) Press the button to cancel out of the AMBIENT CAnCeL/VISIbLe [C] mode. COMPENSATION MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 179: Adjusting For Background Compensation
5. To ensure accurate Display. COMPENSATION results, the background function should only be [bACKGROund COMPenSAtIOn performed by individu- dISPLAy] als who understand the basics of heat transfer and infrared radiation theory. A bar wll appear at the bottom of the screen allowng you to adjust the background compensaton temperature value. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 180 Make sure to use a temperature value that falls within the cur- rent measuring temperature range. 5) Press the button to save the setting and to return to jOyStICK [e] the main display. Press the button to cancel out of the CAnCeL/VISIbLe [C] mode. BACKGROUND COMPENSATION MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 181: Working With The Gain Control Function
The cursor coordinates The cursor coordinates are also displayed and are also displayed and updated continuously as updated continuously as the cursor is moved. the cursor is moved. A bar wll appear at the bottom of the screen showng the current AGC/LVT option: MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 182 Once a Gain Control option has been selected the appropriate label wll appear n the status bar on the man dsplay screen. Press the button to cancel out of the menu CAnCeL/VISIbLe [C] mode and to return to the main display. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 183: Disabling The Gain Control Option
Classic View Menu 3) Press the button to select the option. AGC/LVT jOyStICK [e] [AGC/LVt OPtIOn SeLeCted] A bar wll appear at the bottom of the screen showng the current AGC/LVT option: 4) Toggle the up or down if needed until the AGC/LVT [OFF] jOyStICK option has been selected. [AGC/LVt OFF SeLeCted] 5) Press the button to save the setting and to return to jOyStICK [e] the main display. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 184: Working With The Multi-Point Temperature Display Options
Displays the specified point temperature under [teMP & eMISS] the color bar and dsplays the emssvty set- tng of the pont near the pont cursor. Also dsplays the temperature dfference t between pont and pont . However, the emissivity is dsplayed only when the emssvty of the pont s dfferent from the emssvty of the whole screen. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 185: Setting A Single Point
[P. teMP HIGHLIGHted] Classic View Menu 3) Press the button to select the option. P. TEMP jOyStICK [e] P. teMP x, y COORdInAteS P. teMP LAbeL The new display will appear showing the temperature point, the temperature pont label and the temperature pont coordnates. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 186 P. teMP x, y COORdInAteS HIGHLIGHted 6) Toggle the left or right as needed to move the tempera- jOyStICK ture point along the horizontal plane to the desired location on the image display. teMP. POInt P. teMP x, y COORdInAteS HIGHLIGHted 7) Press the button to set the current temperature point jOyStICK [e] location and return to the main display. Pressng button wll lock the new temperature jOyStICK [e] pont to ts current poston. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 187: Setting Multiple Points
The first temperature point will be labeled . The next tem- perature pont wll be labeled 4) Press the button to establish the temperature point and to [SAVe] highlight the new [P. teMP x, y COORdInAteS] P. teMP POSItIOn [a] P. teMP POSItIOn [b] P. teMP x, y COORdInAteS P. teMP LAbeL MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 188 POSItIOn [c] P. teMP x, y COORdInAteS P. teMP LAbeL The first temperature point was labeled . The second tem- perature pont was labeled . Successve ponts wll be labeled through respectvely. 9) Press the button to set the current temperature point jOyStICK [e] locations and return to the main display. Pressng button wll lock the new temperature jOyStICK [e] ponts to ther current postons. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 189: Changing Set Point Positions
[e] P. teMP POSItIOn [b] P. teMP P. teMP POSItIOn [c] POSItIOn [a] P. teMP x, y COORdInAteS P. teMP LAbeL The new display will appear showing the temperature point, the temperature pont label and the temperature pont coordnates. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 190 5) Toggle the up or down as needed to move the tempera- jOyStICK ture point along the vertical plane to the desired location on the image display. 6) Toggle the left or right as needed to move the tempera- jOyStICK ture point along the horizontal plane to the desired location on the image display. P. teMP POSItIOn [b] P. teMP P. teMP POSItIOn [c] POSItIOn [a] P. teMP x, y COORdInAteS P. teMP LAbeL MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 191: Deleting Individual Set Point Positions
P. teMP x, y COORdInAteS P. teMP LAbeL 9) Press the button to set the new temperature point jOyStICK [e] locations and return to the main display. Pressng button wll lock the new temperature jOyStICK [e] ponts to ther current postons. 6.4.4 Deleting Individual Set Point Positions 1) If using the Standard Type Menu, go to → → [MENU] [MEASURE] [P. TEMP] [P. teMP HIGHLIGHted] Standard View Menu MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 192 The new display will appear showing the temperature point, the temperature pont label and the temperature pont coordnates. 3) Toggle the up or down as needed to scroll through the jOyStICK highlighted temperature point labels to select the temperature point that needs to be deleted. P. teMP POSItIOn [b] P. teMP P. teMP POSItIOn [c] POSItIOn [a] P. teMP x, y COORdInAteS P. teMP LAbeL MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 193 When a selected cursor point has been deleted, the remaining cursor ponts are relabeled. 5) Follow the previous steps 3-4 to delete additional temperature points. P. teMP POSItIOn [a] P. teMP x, y COORdInAteS P. teMP LAbeL 6) Press the button to set the remaining temperature jOyStICK [e] point location(s) and return to the main display. Pressng button wll lock the new temperature jOyStICK [e] ponts to ther current postons. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 194: Deleting All Set Point Positions
P. TEMP P. teMP POSItIOn [b] P. teMP P. teMP POSItIOn [c] POSItIOn [a] P. teMP x, y COORdInAteS P. teMP LAbeL The new display will appear showing the temperature point, the temperature pont label and the temperature pont coordnates. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 195: Mikroscan 7600Pro
In other words, a variation or change in emissivity will cause a change in the image results from the MkroScan 7600PRO. The MkroScan 7600PRO allows you to manually set these emssvty values wthn the range of 0.10 to 1.00 n ncrements of 0.01. It also provdes an opton to choose the approprate value from an on-board emssvty table. 6.5.1 Setting the Display Emissivity Using a Numerical Value (Run Mode) 6.5.1.1 Using the Standard Type Menu 1) Verify the camera is operating in mode. (See Section 4.1 of [Run] this manual for more information on Toggling between the Run and Freeze Modes) 2) Press and hold the button to gain access to the jOyStICK [e] MikroScan 7600PRO quick menu functions. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 196: UsNg The ClassC Type Menu
5) Press the button set the new emissivity value and jOyStICK [e] return to main display. 6.5.1.2 Using the Classic Type Menu 1) Press the button to activate the display functions. jOyStICK [e] 2) Toggle the left or right as needed until the emissivity set- jOyStICK ting becomes highlighted on the display. [eMISSIVIty VALue HIGHLIGHted] 3) Toggle the button up or down to increase or decrease the jOyStICK emissivity value of the display. 4) Press the button set the new emissivity value and jOyStICK [e] return to main display. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 197: Setting The Display Emissivity And Ambient Temperature Using A Numerical Value (Freeze Mode)
6.5.2 Setting the Display Emissivity and Ambient Temperature Using a Numerical Value (Freeze Mode) 6.5.2.1 Using the Standard Type Menu 1) Verify the camera is operating in mode. (See Section 4.1 [FReeze] of this manual for more information on Toggling between the Run and Freeze Modes) 2) Press and hold the button to gain access to the jOyStICK [e] MikroScan 7600PRO quick menu functions and highlight the emissivity setting at the top of the display. [eMISSIVIty VALue HIGHLIGHted] 3) Toggle the button up or down to activate the emissivity jOyStICK correction option. eMISSIVIty VALue AMbIent teMPeRAtuRe VALue A bar wll appear at the bottom of the screen allowng you to change the emssvty value and/or ambent temperature value. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 198 Section 6 4) Toggle the button up or down to increase or decrease the jOyStICK emissivity value of the display. eMISSIVIty VALue AMbIent teMPeRAtuRe VALue 5) Toggle the left or right if needed to highlight the atmo- jOyStICK spheric temperature value. eMISSIVIty VALue AMbIent teMPeRAtuRe VALue 6) Toggle the button up or down to increase or decrease the jOyStICK atmospheric temperature value. eMISSIVIty VALue AMbIent teMPeRAtuRe VALue MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 199 CHAnGe MeSSAGe 8) Press the button to save the setting(s) and to return to jOyStICK [e] the main display. Press the button to cancel the change and CAnCeL/VISIbLe [C] return to the emissivity correction screen. 9) Press the key button to place the camera back into [RUN/FRZ] Run Mode. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 200: UsNg The ClassC Type Menu
6.5.2.2 Using the Classic Type Menu 1) Verify the camera is operating in mode. (See Section 4.1 [FReeze] of this manual for more information on Toggling between the Run and Freeze Modes) 2) Press the button to activate the display functions. jOyStICK [e] 3) Toggle the left or right as needed until the emissivity set- jOyStICK ting becomes highlighted on the display. [eMISSIVIty VALue HIGHLIGHted] 4) Toggle the button up or down to activate the emissivity jOyStICK correction option. eMISSIVIty VALue AMbIent teMPeRAtuRe VALue A bar wll appear at the bottom of the screen allowng you to change the emssvty value and/or ambent temperature value. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 201 Section 6 5) Toggle the button up or down to increase or decrease the jOyStICK emissivity value of the display. eMISSIVIty VALue AMbIent teMPeRAtuRe VALue 6) Toggle the left or right if needed to highlight the atmo- jOyStICK spheric temperature value. eMISSIVIty VALue AMbIent teMPeRAtuRe VALue 7) Toggle the button up or down to increase or decrease the jOyStICK atmospheric temperature value. eMISSIVIty VALue AMbIent teMPeRAtuRe VALue MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 202 CHAnGe MeSSAGe 9) Press the button to save the setting(s) and to return to jOyStICK [e] the main display. Press the button to cancel the change and CAnCeL/VISIbLe [C] return to the emissivity correction screen. 10) Press the key button to place the camera back into [RUN/FRZ] Run Mode. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 203: Setting The Display Emissivity Using The On-Board Emissivity Tables
Section 8 of this manual. [eMISS tAbLe dISPLAy] 4) Toggle the up or down, if needed, to highlight the jOyStICK applicable material from the list of menu choices. [MAteRIAL HIGHLIGHted] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 204 [MAteRIAL tyPe HIGHLIGHted] 7) Press the button to save the setting and to return to jOyStICK [e] the main display. Press the button to cancel out of the CAnCeL/VISIbLe [C] function. EMISS TABLE MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 205: Working With Point Emissivities
Data Analysis Section 6 6.5.4 Working with Point Emissivities In addition to viewing point temperature data, the MikroScan 7600PRO also allows you to establsh ndvdual emssvty values for one or more ponts and to obtan nfor- maton on how the temperatures of the varous ponts are affected by dfferences n emssvty settngs. These emssvty optons can be used n ether the or FReeze modes. 6.5.4.1 Setting the Display to Show Emissivity Effects on Various Points NOTE 1) Follow steps 1-5 for Setting the Multipoint Display Mode [TEMP] (See Section 3.9.3.1). Displays the temperature of the The point mode options are: points under the color bar.
Page 206 [ANALYZE] [P. EMISS] [P. eMISS HIGHLIGHted] Classic View Menu 5) Press the button to select the option. jOyStICK [e] P. EMISS POInt teMP POInt eMISSIVIty The new display will appear showing the cursor points, the pont temps and the pont emssvty values. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 207: SettNg EmSsVTy Values For One Or More PoNts
P.teMP POSItIOn [c] old emissivity value. Emissivity Values of points do not automatically default back to E1.00. POInt eMISSIVIty VALue POInt LAbeL HIGHLIGHted MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 208: DeletNg IndVDual EmSsVTy Values
P.teMP POSItIOn POInt eMISSIVIty VALue POInt LAbeL HIGHLIGHted 6) Repeat steps 3-5 to change additional cursor point emissivity values. 7) Press the button to lock the settings and to return to jOyStICK [e] the main display. 6.5.4.3 Deleting Individual Emissivity Values 1) If using the Standard Type Menu, go to → → [MENU] [MEASURE] [P. EMISS] [P. eMISS HIGHLIGHted] Standard View Menu MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 209 The new display will appear showing the points, the point temps and the pont emssvty values. 3) Toggle the up or down as needed to scroll through the jOyStICK highlighted cursor point labels to select the cursor point that needs to be deleted. P. teMP & eMISS POSItIOn [c] P. teMP & eMISS P. teMP & eMISS POSItIOn [a] POSItIOn [b] POInt eMISSIVIty VALue POInt LAbeL MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 210 P. teMP & eMISS Emissivity Values of points POSItIOn [a] do not automatically default back to E1.00. POInt eMISSIVIty VALue POInt LAbeL 6) Press the button to set the remaining cursor point jOyStICK [e] location(s) and return to the main display. Pressng button wll lock the new cursor ponts jOyStICK [e] to ther current postons. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 211: DeletNg All Set EmSsVTy Values
P. teMP & eMISS POSItIOn [c] P. teMP & eMISS P. teMP & eMISS POSItIOn [a] POSItIOn [b] POInt eMISSIVIty VALue POInt LAbeL The new display will appear showing the cursor points, the pont temps and the pont emssvty values. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 212: Working With Boxes
The Box functon dsplays a sngle box and can be used n ether the modes. FReeze 6.6.1 Adding a Box 1) If using the Standard Type Menu, go to → → [MENU] [MEASURE] [BOx] [bOx HIGHLIGHted] Standard View Menu MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 213 [teMP On] also show the maximum, minimum, and average temperature of the area defined by the box. See Section 3.9.3.2 for more nformaton on Actvatng/Deactvatng the Box Temperature Opton. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 214 5) Toggle the left or right as needed to move the box along jOyStICK the horizontal plane to the desired location point on the image dis- play. neW bOx LOCAtIOn bOx MOVe LAbeL [◊] HIGHLIGHted 6) Press the button to set the box and highlight the first set of X, SAVe Y Coordinates for the Box. x, y COORdInAteS HIGHLIGHted FOR tHe uPPeR LeFt CORneR OF tHe bOx MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 215 COORdInAteS HIGHLIGHted FOR tHe uPPeR LeFt CORneR OF tHe bOx 9) Press the button to set the first set of coordinates and high- SAVe light the second set of X, Y Coordinates for the Box. x, y COORdInAteS HIGHLIGHted FOR tHe LOWeR RIGHt CORneR OF tHe bOx MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 216: Adding Multiple Boxes
See Section 3.9.3.2 for more nformaton on Actvatng/Deactvatng the Box Temperature Opton. 6.6.2 Adding Multiple Boxes 1) If using the Standard Type Menu, go to → → [MENU] [MEASURE] [BOx] [bOx HIGHLIGHted] Standard View Menu MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 217 [teMP On] also show the maximum, minimum, and average temperature of the area defined by the box. See Section 3.9.3.2 for more nformaton on Actvatng/Deactvatng the Box Temperature Opton. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 218 [b] bOx [C] bOx [d] MAx, MIn, And AVG teMPS FOR bOxeS A tHROuGH e bOx LAbeL HIGHLIGHted The first box was labeled . The second box was labeled Successve boxes wll be labeled through respectvely. 6) Press the button to return to the main display. jOyStICK [e] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 219: Deleting A Box
Classic View Menu 2) Press the button to select the option. jOyStICK [e] bOx [e] bOx [A] bOx [b] bOx [C] bOx [d] MAx, MIn, And AVG teMPS FOR bOxeS A tHROuGH e bOx LAbeL HIGHLIGHted MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 220 When a selected box has been deleted, the remaining boxes are relabeled. 5) Follow the previous steps 3-4 to delete additional boxes. bOx [A] bOx [b] bOx [C] MAx, MIn, And AVG teMPS FOR bOxeS A tHROuGH C bOx LAbeL HIGHLIGHted 6) Press the button to return to the main display. jOyStICK [e] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 221: Deleting All Boxes
[ANALYZE] [BOx] [bOx HIGHLIGHted] Classic View Menu 2) Press the button to select the option. jOyStICK [e] bOx [A] bOx [b] bOx [C] MAx, MIn, And AVG teMPS FOR bOxeS A tHROuGH C bOx LAbeL HIGHLIGHted MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 222: Working With The Max/Min Temperature Display
The Max/Min Temperature Display Options can be used in either the modes. FReeze The Max/Min Temperature Display offers five mode choices: Mode Details Deactvates the maxmum/mnmum temperature [OFF] dsplay. Dsplays the maxmum temperature value of the [MAx] thermal mage and tracks t wth the cursor. Dsplays the mnmum temperature value of the [MIn] thermal mage and tracks t wth the cursor. Dsplays the maxmum temperature value of the [MAx HOLd] thermal mage and holds ts value. Dsplays the mnmum temperature value of the [MIn HOLd] thermal mage and holds ts value. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 223: Selecting The Max/Min Temperature Option-Whole Display
[MAx/MIn HIGHLIGHted] Standard View Menu If using the Classic Type Menu, go to → → [MENU] [ANALYZE] [MAx/MIN] [MAx/MIn HIGHLIGHted] Classic View Menu 2) Press the button to select the option. MAx/MIN TEMP jOyStICK [e] bOx OPtIOn LAbeL MAx/MIn OPtIOn LAbeL The new dsplay wll appear showng the MAX/MIN OPTION LABEL as well as the MAX/MIN BOX OPTION LABEL. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 224 MAx OR MIn teMP POInt MIKRON logo, and are updated continuously as the box is moved. The box coordinates are also displayed and updated continuously as the box is moved. The new dsplay wll appear showng the MAX or MIN tem- perature pont of the entre dsplay along wth the MAX or MIN temperature at the cursor pont. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 225: Setting The Max/Min Temperature Option-Defined Box
Refer to Secton 6.5 enttled Working with Boxes for more information on creating and modifying a defined box. 2) If using the Standard Type Menu, go to → → [MENU] [MEASURE] [MAx/MIN] [MAx/MIn HIGHLIGHted] Standard View Menu If using the Classic Type Menu, go to → → [MENU] [ANALYZE] [MAx/MIN] [MAx/MIn HIGHLIGHted] Classic View Menu MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 226 MAx/MIn OPtIOn LAbeL The new dsplay wll appear showng the MAX/MIN OPTION LABEL as well as the MAX/MIN BOX OPTION LABEL. 4) Toggle the up or down as needed to select jOyStICK [OFF] [MAx] , or , from the highlighted options. [MIn] [MAx HOLd] [MIn HOLd] MAx/MIn OPtIOn LAbeL SeLeCted 5) Toggle the to the right to set the desired option and to jOyStICK highlight the box option label. MAx/MIn bOx OPtIOn LAbeL SeLeCted MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 227: Canceling The Max/Min Temperature Option
POInt OF OF deFIned bOx deFIned bOx The new dsplay wll appear wth the cursor pont located at the defined MAX or MIN temperature point of the defined box. 6.7.3 Canceling the Max/Min Temperature Option 1) If using the Standard Type Menu, go to → → [MENU] [MEASURE] [MAx/MIN] [MAx/MIn HIGHLIGHted] Standard View Menu MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 228 2) Press the button to select the option. jOyStICK [e] MAx/MIN TEMP bOx OPtIOn LAbeL MAx/MIn OPtIOn LAbeL The new dsplay wll appear showng the MAX/MIN OPTION LABEL as well as the MAX/MIN BOX OPTION LABEL. 3) Toggle the up or down as needed to select from the jOyStICK [OFF] highlighted options. MAx/MIn [OFF] OPtIOn SeLeCted 4) Press the button to return to the main display. jOyStICK [e] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 229: Working With The Composite Image Function
Data Analysis Section 6 6.8 Working with the Composite Image Function The 7600PRO provides thermal/visual composite image functionality which allows you to set a temperature zone and create a thermal/visual composite image for a more detailed analysis. 6.8.1 Creating a Composite Image → → 1) Go to...
Page 230 5) Toggle the up to increase the range of the temperature jOyStICK zone or toggle the down to decrease the range of the jOyStICK temperature zone. teMPeRAtuRe zOne teMPeRAtuRe zOne CHAnGe SyMbOLS MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 231: Fitting The Composite Image
A bar will appear at the bottom of the screen showing the fit comp options. 4) Toggle the right or left to move the thermal image into jOyStICK position horizontally. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 232: Working With The Multi Sense Display Settings
6.9 Working with the Multi Sense Display Settings The 7600PRO provides a Multi Sense Display feature that will adjust the color palette to allow you to focus on the details surrounding the center temperature on the display or on the high and low temperatures of the display.
Page 233: Working With The Iso Thermal Function
An Isotherm s a vsual representaton of the temperature breakdown on a thermal mage. The MkroScan 7600PRO Isothermal Functon allows you to solate up to four ISO Thermal bands, with each band representing a specified temperature range. 6.10.1 Customizing the Range of a Single ISO Thermal Band 1) Go to → → [MENU] [DISPLAY] [ISO] [ISO HIGHLIGHted] [ISO HIGHLIGHted] Standard View Menu Classic View Menu MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 234 ISO tHeRMAL bAnd ISO bAnd LAbeL HIGHLIGHted A bar wll appear at the bottom of the screen showng the ISO Band Label and the correspondng band. 3) Press the button to access the ISO change symbols. SAVe ISO tHeRMAL bAnd ISO CHAnGe SyMbOLS 4) Toggle the left to move the ISO Band up the temperature jOyStICK range scale or toggle the right to move the ISO Band jOyStICK down the temperature range scale. ISO tHeRMAL bAnd ISO CHAnGe SyMbOLS MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 235: Adding Multiple Iso Thermal Bands
ISO CHAnGe SyMbOLS 6) Press the button to set the ISO band and to return to the ISO SAVe Band Labels. 7) Add additional ISO bands (See Section 6.9.2 for more information) Press the button to return to the main display. jOyStICK [e] 6.10.2 Adding Multiple ISO Thermal Bands 1) Go to → → [MENU] [DISPLAY] [ISO] [ISO HIGHLIGHted] [ISO HIGHLIGHted] Standard View Menu Classic View Menu MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 236 3) Toggle the button up to add an additional ISO Band to jOyStICK the Temperature Range Scale. ISO tHeRMAL bAnd A ISO tHeRMAL bAnd b ISO bAnd LAbeL HIGHLIGHted 4) Press the button to access the ISO change symbols. SAVe ISO tHeRMAL bAnd A ISO tHeRMAL bAnd b ISO CHAnGe SyMbOLS MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 237: Modifying Existing Iso Thermal Bands
ISO bAnd LAbeLS 9) Press the button again to return to the main display. jOyStICK [e] 6.10.3 Modifying Existing ISO Thermal Bands 1) Go to → → [MENU] [DISPLAY] [ISO] [ISO HIGHLIGHted] [ISO HIGHLIGHted] Standard View Menu Classic View Menu MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 238 C ISO tHeRMAL bAnd d ISO bAnd LAbeLS 4) Press the button to select the ISO label and to access the ISO SAVe change symbols. ISO tHeRMAL bAnd A ISO tHeRMAL bAnd b ISO tHeRMAL bAnd C ISO tHeRMAL bAnd d ISO CHAnGe SyMbOLS MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 239: Erasing An Individual Iso Thermal Band
ISO bAnd LAbeLS 9) Press the button again to return to the main display. jOyStICK [e] 6.10.4 Erasing an Individual ISO Thermal Band 1) Go to → → [MENU] [DISPLAY] [ISO] [ISO HIGHLIGHted] [ISO HIGHLIGHted] Standard View Menu Classic View Menu MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 240 ISO tHeRMAL bAnd d ISO bAnd LAbeLS A bar wll appear at the bottom of the screen showng the ISO Band Label and the correspondng band. 3) Toggle the up or down as needed to select the desired ISO jOyStICK Thermal Label. ISO tHeRMAL bAnd A ISO tHeRMAL bAnd b ISO tHeRMAL bAnd C ISO tHeRMAL bAnd d ISO bAnd LAbeLS MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 241: Erasing All Iso Thermal Bands
A ISO tHeRMAL bAnd b ISO bAnd LAbeLS 6) Press the button to return to the main display. jOyStICK [e] 6.10.5 Erasing all ISO Thermal Bands 1) Go to → → [MENU] [DISPLAY] [ISO] [ISO HIGHLIGHted] [ISO HIGHLIGHted] Standard View Menu Classic View Menu MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 242 3) Toggle the button down as needed to select the ISO Ther- jOyStICK mal Label. [OFF] ISO tHeRMAL bAnd A ISO tHeRMAL bAnd b ISO tHeRMAL bAnd C ISO tHeRMAL bAnd d ISO bAnd OFF LAbeL SeLeCted 4) Press the button to return to the main display. jOyStICK [e] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 243: Working With The Wave Function
Data Analysis Section 6 6.11 Working with the Wave Function The MikroScan 7600PRO provides a waveform (line profile) function that provides temperature data To set the image zoom: 1) Verify the display is in mode and that no other parameter [FReeze] is highlighted. 2) If using the Standard Type Menu, go to → → [MENU] [DISPLAY] [wAVE] [WAVe HIGHLIGHted] Standard View Menu If using the Classic Type Menu, go to →...
Page 244 The waveform (line profile) options are: • x • y • x & y • OFF 3) Toggle the up or down as needed to scroll through the jOyStICK waveform (line profile) options. [WAVe SeLeCted] 4) Press the button to select the desired setting and to jOyStICK [e] return to the main display. [WAVe OPtIOn Set] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 245: Working With The Event Functions
6.12.1 Setting the Event Condition 1) Go to → → [MENU] [MEASURE] [RUN MODE] [Run MOde HIGHLIGHted] [Run MOde HIGHLIGHted] Standard View Menu Classic View Menu 2) Press the button to access the menu. RUN MODE jOyStICK [e] [Run MOde dISPLAy] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 246 If a threshold value is not specified, an event condition will be trggered accordng to the maxmum or mnmum temperature values of the thermal mage. 5) Toggle the up or down as needed to increase or decrease jOyStICK the temperature threshold value. [Run MOde eVent tHReSHOLd teMPeRAtuRe SettInG CHAnGed] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 247 The two threshold temperature condition settings are: which triggers an event condition when the [undeR] temperature decreases below the threshold value. which triggers an event condition when the [OVeR] temperature rises above the threshold value. 7) Toggle the up or down as needed to select the desired jOyStICK threshold temperature condition. 8) Toggle the to the right to set the option and return to the jOyStICK list of displayed options. [Run MOde eVent tHReSHOLd teMPeRAtuRe COndItIOn SeLeCted] 9) Proceed through the list of additional menu choices Press the button to return to the main display. jOyStICK [e] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 248: Selecting A Range Area
Classic View Menu 2) Press the button to access the menu. jOyStICK [e] RUN MODE 3) Toggle the up or down as needed to select from the jOyStICK [BOx] list of menu options. [Run MOde bOx OPtIOn HIGHLIGHted] 4) Toggle the to the right to highlight the box range options. jOyStICK [Run MOde bOx RAnGe OPtIOn HIGHLIGHted] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 249: Choosing To Display An Alarm Warning Message
6) Toggle the to the right to set the option and return to the jOyStICK list of displayed options. 7) Proceed through the list of additional menu choices Press the button to return to the main display. jOyStICK [e] 6.12.3 Choosing to Display an Alarm Warning Message 1) Go to → → [MENU] [MEASURE] [RUN MODE] [Run MOde HIGHLIGHted] [Run MOde HIGHLIGHted] Standard View Menu Classic View Menu MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 250 [ALARM MSG] jOyStICK from the list of menu options. [Run MOde ALARM MeSSAGe OPtIOn HIGHLIGHted] 4) Toggle the to the right to highlight the alarm message jOyStICK settings. [Run MOde ALARM MeSSAGe OPtIOn HIGHLIGHted] 5) Toggle the up or down as needed to select the desired jOyStICK alarm message setting. [Run MOde ALARM MeSSAGe OPtIOn HIGHLIGHted] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 251: Choosing To Sound An Audible Warning
[Run MOde HIGHLIGHted] [Run MOde HIGHLIGHted] Standard View Menu Classic View Menu 2) Press the button to access the menu. jOyStICK [e] RUN MODE 3) Toggle the up or down as needed to select [ALARM jOyStICK from the list of menu options. SOUND] [Run MOde ALARM SOund OPtIOn HIGHLIGHted] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 252 [Run MOde ALARM SOund OPtIOn HIGHLIGHted] The alarm sound options are: there will be no audible warning when the event condition [OFF] is triggered. an audible beep will be heard when the event condition is [On] triggered. See section 6.11.1 for more information on Setting the Event Condition. 6) Toggle the to the right to set the option and return to the jOyStICK list of displayed options. 7) Proceed through the list of additional menu choices Press the button to return to the main display. jOyStICK [e] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 253: Choosing To Freeze Measurements
Classic View Menu 2) Press the button to access the menu. jOyStICK [e] RUN MODE 3) Toggle the up or down as needed to select from jOyStICK [FREEZE] the list of menu options. [Run MOde FReeze OPtIOn HIGHLIGHted] 4) Toggle the to the right to highlight the freeze jOyStICK settings. [Run MOde FReeze OPtIOn HIGHLIGHted] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 254: Saving Measurements To A Compact Flash Card
7) Proceed through the list of additional menu choices Press the button to return to the main display. jOyStICK [e] 6.12.6 Saving Measurements to a Compact Flash Card 6.12.6.1 Selecting the PC Card Option 1) Go to → → [MENU] [MEASURE] [RUN MODE] [Run MOde HIGHLIGHted] [Run MOde HIGHLIGHted] Standard View Menu Classic View Menu MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 255: V15.4F
[SAVE] jOyStICK the list of menu options. [Run MOde SAVe OPtIOn HIGHLIGHted] 4) Toggle the to the right to highlight the save jOyStICK settings. [Run MOde SAVe OPtIOn HIGHLIGHted] 5) Toggle the up or down as needed to select [PC CARD] jOyStICK from the list of save settings. [Run MOde PC CARd OPtIOn HIGHLIGHted] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 256: SelectNg The Pc Card Interval OptOn
[RUN MODE] [Run MOde HIGHLIGHted] [Run MOde HIGHLIGHted] Standard View Menu Classic View Menu 2) Press the button to access the menu. RUN MODE jOyStICK [e] 3) Toggle the up or down as needed to select [INTERVAL] jOyStICK from the list of menu options. [Run MOde InteRVAL OPtIOn HIGHLIGHted] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 257 Section 6 4) Toggle the to the right to highlight the interval time jOyStICK settings. [Run MOde InteRVAL OPtIOn HIGHLIGHted] 5) Toggle the up or down as needed to select the desired jOyStICK interval delay time from the list of save settings. [Run MOde InteRVAL OPtIOn HIGHLIGHted] 6) Toggle the to the right to set the interval delay time value jOyStICK and return to the list of displayed options. 7) Proceed through the list of additional menu choices Press the button to return to the main display. jOyStICK [e] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 258: SelectNg The Pc Card TMe Delay OptOn
Classic View Menu 2) Press the button to access the menu. RUN MODE jOyStICK [e] 3) Toggle the up or down as needed to select from [DELAY] jOyStICK the list of menu options. [Run MOde deLAy OPtIOn HIGHLIGHted] 4) Toggle the to the right to highlight the delay time jOyStICK settings. [Run MOde deLAy OPtIOn HIGHLIGHted] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 259: SelectNg The Pc Card Save VSBle Image OptOn
[e] 6.12.6.4 Selecting the PC Card Save Visible Image Option 1) Go to → → [MENU] [MEASURE] [RUN MODE] [Run MOde HIGHLIGHted] [Run MOde HIGHLIGHted] Standard View Menu Classic View Menu 2) Press the button to access the menu. RUN MODE jOyStICK [e] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 260 [SAVE VISIBLE] from the list of menu options. [Run MOde SAVe VISIbLe OPtIOn HIGHLIGHted] 4) Toggle the to the right to highlight the visible save jOyStICK settings. [Run MOde SAVe VISIbLe OPtIOn HIGHLIGHted] 5) Toggle the up or down as needed to select the desired vis- jOyStICK ible save option from the list of settings. [Run MOde InteRVAL OPtIOn HIGHLIGHted] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 261: Saving Measurements To Real-Time Memory (Rtm)
[Run MOde HIGHLIGHted] [Run MOde HIGHLIGHted] Standard View Menu Classic View Menu 2) Press the button to access the menu. RUN MODE jOyStICK [e] 3) Toggle the up or down as needed to select from [SAVE] jOyStICK the list of menu options. [Run MOde SAVe OPtIOn HIGHLIGHted] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 262 [Run MOde SAVe OPtIOn HIGHLIGHted] 5) Toggle the up or down as needed to select from the [RTM] jOyStICK list of save settings. [Run MOde RtM OPtIOn HIGHLIGHted] 6) Toggle the to the right to set the option and return jOyStICK [RTM] to the list of displayed options. 7) Proceed through the list of additional menu choices Press the button to return to the main display. jOyStICK [e] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 263: SettNg The Rtm Freeze OptOn
Setting the Event Condition. To set the RTM Freeze Option: 1) Go to → → [MENU] [MEASURE] [RUN MODE] [Run MOde HIGHLIGHted] [Run MOde HIGHLIGHted] Standard View Menu Classic View Menu MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 264 [FREEZE] jOyStICK the list of menu options. [Run MOde FReeze OPtIOn HIGHLIGHted] 4) Toggle the to the right to highlight the first set of freeze jOyStICK conditions. [Run MOde FReeze COndItIOn 1 HIGHLIGHted] 5) Toggle the up or down as needed to select the desired jOyStICK condition from the list of menu options. [Run MOde FReeze COndItIOn 1 HIGHLIGHted] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 265 [Run MOde FReeze COndItIOn 2 HIGHLIGHted] 7) Toggle the up or down as needed to select the desired jOyStICK condition from the list of menu options. [Run MOde FReeze COndItIOn 2 HIGHLIGHted] The options are: the instrument will continue to operate in run mode even [OFF] when the maximum number of frames (1664) held in memory have been reached. If the maximum number has been reached, the instrument will continue recording by overwriting the data which had been previously saved to the internal memory. the instrument will enter freeze mode as soon as the [MAx maximum number of frames (1664) held in memory have FRAMe] been reached. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 266: SelectNg The Rtm Interval OptOn
[RUN MODE] [Run MOde HIGHLIGHted] [Run MOde HIGHLIGHted] Standard View Menu Classic View Menu 2) Press the button to access the menu. RUN MODE jOyStICK [e] 3) Toggle the up or down as needed to select [INTERVAL] jOyStICK from the list of menu options. [Run MOde InteRVAL OPtIOn HIGHLIGHted] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 267 Section 6 4) Toggle the to the right to highlight the interval time jOyStICK settings. [Run MOde InteRVAL OPtIOn HIGHLIGHted] 5) Toggle the up or down as needed to select the desired jOyStICK interval delay time from the list of save settings. [Run MOde InteRVAL OPtIOn HIGHLIGHted] 6) Toggle the to the right to set the interval delay time value jOyStICK and return to the list of displayed options. 7) Proceed through the list of additional menu choices Press the button to return to the main display. jOyStICK [e] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 268: SelectNg The Rtm Frame Delay OptOn
Classic View Menu 2) Press the button to access the menu. RUN MODE jOyStICK [e] 3) Toggle the up or down as needed to select from [DELAY] jOyStICK the list of menu options. [Run MOde deLAy OPtIOn HIGHLIGHted] 4) Toggle the to the right to highlight the frame delay jOyStICK settings. [Run MOde deLAy OPtIOn HIGHLIGHted] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 269 Data Analysis Section 6 5) Toggle the up or down as needed to select the desired jOyStICK frame delay from the list of save settings. [Run MOde deLAy OPtIOn HIGHLIGHted] 6) Toggle the to the right to set the frame delay value and jOyStICK return to the list of displayed options. 7) Proceed through the list of additional menu choices Press the button to return to the main display. jOyStICK [e] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 270 Data Analysis Section 6 To ensure consistent document formatting, this page was intentionally left blank MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 271: Advanced Operations
LCD Display. 7.1.1 Connecting the LCD Display Before connecting the display cable to your MikroScan 7600PRO, it is important that the power switch on the camera be in the off position. It is also important that the power to the LCD display remains off until all connections have been made.
Page 272: Setting The Rs-232C Baud Rate (If Necessary)
RATE] eVen eVen [RS bAud RAte HIGHLIGHted] nOne nOne eVen eVen 4) Toggle the to the right to highlight the jOyStICK RS BAUD RATE option. [RS bAud RAte OPtIOn HIGHLIGHted] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 273: Setting The Rs-232C Data Format (If Necessary)
2) Press the button to gain access to the RS232C SET UP jOyStICK [e] Menu 3) Toggle the up or down if needed to highlight [RS FOR- jOyStICK MAT] [RS FORMAt HIGHLIGHted] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 274 DATA LENGTH/STOP BIT/PARITY 6) Press the button to save the setting and to return to jOyStICK [e] the main display. The variable options appear in the following order: • data Length/Stop bit/Parity MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 275: Working With External Video Displays
7.2.1 Connecting the Video Display Cable Before connecting the display cable to your MikroScan 7600PRO, it is important that the power switch on the camera be in the off position. It is also important that the power to the video display remains off until all connections have been made.
Page 276 → 1) Go to [MENU] [SETUP] [DISPLAY] [dISPLAy HIGHLIGHted] [dISPLAy HIGHLIGHted] The MikroScan 7600PRO does not meet IP54 stan- Standard View Menu Classic View Menu dards while the rear cover remains open. 2) Press the button to gain access to the...
Page 277: SettNg The Tv ScannNg Mode
640 x 480, this means that each image or image frame would include 480 individual rows of pixels. The 7600PRO offers two scanning modes. The first is the default non-interlace mode. With the non-interlace mode of scanning, the whole frame is painted at one time with each line being scanned in succession (i.e.
Page 278 TV SCAN jOyStICK of menu choices. [tV SCAn HIGHLIGHted] 4) Toggle the to the right to highlight the TV Scan option. jOyStICK [tV SCAn OPtIOn HIGHLIGHted] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 279: Working With Communication Interfaces
• nOn-InteRLACe (deFAuLt) • InteRLACe 7.3 Working with Communication Interfaces The MikroScan 7600PRO has the ability to communicate in Real-Time with a remote computer (running the MikroSpec RT software) through the IEEE 1394 (FireWire®) interface, which provides remote camera control functionality and real-time data acqui- sition and analysis.
Page 280: Activating The Ieee 1394 Functionality
Standard View Menu 2) Press the button to gain access to the INITIAL SET UP jOyStICK [e] Menu 3) Toggle the up or down if needed to highlight [IEEE 1394] jOyStICK [Ieee 1394 HIGHLIGHted] MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 281: Calibrating The Instrument
To correct for the iar with terms such as iar with terms such as error, the MikroScan 7600PRO is first aimed at the ambient or other emissivity, reflectance, emissivity, reflectance, source of error. It then generates a compensation signal to correct all...
Page 282: Performing A Ref Cal (Reference Calibration)
Classic View Menu Standard View Menu 3) Press the button to begin the function REF CAL jOyStICK [e] The task bar will display Put tHe LenS CAP On MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 283: Returning All Settings To Default Values
Once the initial- ization process has been completed, the camera enters the run mode and all settings will have been returned to the instruments default values. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 284 MOde tinue through the initialization process. Once the initialization process has been completed, the camera enters the run mode and all settings will have retained their former values. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 285: Principle Of Thermal Imaging
A Spectrum of Electromagnetic Radiation The wavelength of the infrared radiation ‘band’ is 0.78 to 1000µm (micrometers). This is longer than the wavelength of vsble lght yet shorter that rado waves. The wavelengths of infrared radiation are classified from the near infrared to the far infrared. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 286: Emissivity
(a) transmissivity (t) and the reflectivity (r) of the body. According to the theory of conservation of energy, the extent to which materials reflect, absorb and transmit IR energy is known as the emissivity of the materal. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 287: Blackbody Radiation
Stefan Bolzmann’s equation The temperature of blackbody can be obtaned drectly from the radant energy of the blackbody by this equation. In order to find out the wavelength on the maximum spec- tral radiant emittance, differentiate Planck’s law and take the value to 0. wien’s displacement law MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 288 They also show that as the temperature rises, the peak of spectral radiant emittance s shftng to shorter wavelengths. Ths phenomenon s observable n the vsble lght region as an object at a low temperature appears red, and as the temperature increases, it changes to yellowsh and then whtsh color—thus shftng to shorter & shorter wave- lengths as the temperature ncreases. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 289: Blackbody Type Source And Emissivity
When the diameter of the hole is as 2r and the depth is as L, if L/r is equal or more than 6, it is used as a blackbody-type source for practical use. The following figure shows an example of a blackbody-type source based on blackbody conditions. MikroScan 7600PRO Operator’s Manual Catalog 11180-94...
Page 290: Determining Emissivity
EK : energy of blackbody-type source ES: energy of measured object X: emissivity of measured object EK : ES = 1 : X Where, 3) Determination by ratio — Option 2 An object, resembling a blackbody, is attached to a heat source to make the temperature of the blackbody part and the measur- ng object the same. The rato of nfrared radaton energes are then determned as n #2 above. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 291: Background Noise
The followng methods may be useful to reduce background nose. 1) Shorten the dstance between the measured object and of the thermal mager. Please keep a safe dstance to protect the operator as well as the nstrument. 2) Have no high temperature object behind the measured object, such as the sun shnng on the back of the measured object. 3) Do not allow drect sunlght to strke thermal mager. 4) Do not allow obstacles such as dust or vapor (whch attenuates the nfrared sgnal) between the measured object and the thermal mager. MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 292: Practical Measurement
(4) Measuring by Wedge effect With this method, the emissivity of the measured surface itself is enhanced through use of the wedge or sem-wedge effect. But one must be careful about the number of reflections and/or the measuring angle. A small change n angle wll reduce the emssvty enhancement. Measuring by wedge effect MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 293: Emissivity Of Various Materials
Principle of Thermal Imaging Section 8 8.8 Emissivity of Various Materials From “Infrared Radiation, a Handbook for Applications “by Mikael A. Bramson MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 294: V15.4F
Principle of Thermal Imaging Section 8 8.8 Emissivity of Various Materials (continued) MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 295 Principle of Thermal Imaging Section 8 8.8 Emissivity of Various Materials (continued) MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 296 Principle of Thermal Imaging Section 8 8.8 Emissivity of Various Materials (continued) MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 297 2) Remove any remaining dirt and contamination with a damp cloth and a small amount of neutral detergent, then wipe dry. 3) Inspect the lens and the LCD for smears or dust. Remove dust usng a lens brush avalable from many camera stores. Remove smears wth a lens tssue and lens cleaning fluid, The MikroScan 7600PRO The MikroScan 7600PRO also avalable from many camera stores. instrument is a sealed unit. instrument is a sealed unit. 4) Turn the power off and replace the lens cap. Do not attempt to open the Do not attempt to open the...
Page 298 Camera from Viewefinder mode to LCD Mode) The lens cap s on. Remove the lens cap. (See Secton 3.3 for more nformaton on Han- dlng the Lens Protecton Cap). The dsplay cable s Connect the dsplay cable (See not connected. Secton 7.1 for more nformaton on workng wth LCD Dsplays) The RS232C settng Set the RS232C settng to ts ntal s not set to the ntal value (See Secton 7.1.3 and 7.1.4 value. for more nformton on wotkng wth the RS232C settngs) 3 No mage n The RS232C settng Set the RS232C settng to ts ntal viewfinder or on LCD s not set to the ntal value (See Secton 7.1.3 and 7.1.4 Dsplay value. for more nformton on wotkng wth the RS232C settngs) MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 299 Turn the camera power “off” and adjacent to or touchng ether turn off the source of the a source of electrcal nose or move camera to a less nosy nose such as nducton locaton. heatng equpment. 6 Camera can not be The Lens unt s not Turn the mountng rng of the man focused properly attached to unt towards close and attach the the camera. lens nt to the man unt tghtly. 7 Backup s mpossble The charge on the Connect the AC adapter for ap- unt’s nternal battery proxmately 1 hour to recharge the has been exhausted camer’s nternal battery. (See Secton 3.2.3 for more nformaton on Connectng the AC Adapter). MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 300 The mage was saved Actvate the vsble save opton nO VISIbLe LIGHt wthout a correspond- before savng mages. (See Sec- dAtA ng vsble lght mage. ton 3.9.2.3 for more nformaton on Workng wth the Vsble Save Opton). Specified page of the Verfy that you have the correct FILe nOt FOund file does not exist. memory card nserted n the camera The memory card s Reformat the memory card (See I/O eRROR not formatted Secton 5.4.5 for more nformaton on Formattng the Memory Card) MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 301 Appendix Section 9 9.5 MikroScan 7600PRO Specifications MikroScan 7600 PRO Temperature Range: Range 1: -40°C to 120°C Performance Range 2: 0°C to 500°C Range 3: 200°C to 2000°C (Optional) Measurement Accuracy: ±2% or 2°C of reading Field of View: 21.7°(H) x 16.4°(V) Focus Range:...
Page 302 Appendix Section 9 To ensure consistent document formatting, this page was intentionally left blank MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 303 Button Control Features 15. See also Camera Functions Calibration Calibrating the Instrument 271 Performing a ERSP CAL (External Response Calibration) 272 Performing a REF CAL (Reference Calibration) 272 CAL menu 21 Camera Construction 8, 9 Camera Interfaces 11 MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 304 Working with the Event Function 112, 113, 233, 235 External LCD Displays Connecting the LCD display 261 Disconnecting the LCD display 261 Setting the RS-232C Baud Rate 262 Setting the RS-232C Data Format 263 MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 305 Language 23. See also Initial menu LCD Bright 27 LCD on/off. See Setup Menu Lens 5, 22, 32, 34, 39, 40, 91, 130, 131, 287, 288. See also CAL menu Handling the Lens Protection Cap 32 MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 306 Operation 1, 4, 5, 24, 25, 32, 35, 36, 55, 66, 68, 69, 86, 94, 129, 130, 131, 271, 273, 287. See also Initial menu PAL. See TV SYSTEM Point Emiss 16 Point Temp 15 Power Standby Mode 94 MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 307 Software. See On Board Image Processing Software Span 15, 26, 45, 69, 70, 108, 110, 111 Specifications 291 Standard Type Menu 13. See also On Board Image Processing Software Standby Now 27. See also Setup Menu MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 308 TV Scan 27 TV SYSTEM 27 Unpacking and Inspection 5 Version 27, 34, 91. See also Setup Menu Video Displays Connecting the video display cable 265 Setting the Video Display Parameters 265 MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...
Page 309 Voice Memo 15, 24, 56, 57, 58, 130, 132, 133, 143. See also Save Menu Warranty 4 Waveform 21, 233, 234 Working with Images Stored to Real-Time Memory. See Event Function: Working with the Event Function ZOOM 21, 113, 114 MikroScan 7600PRO Operator’s Manual Catalog 11180-94 V15.4F 050406...

MikroScan 7600PRO Operator's Manual

General Information

Introduction

Getting Started

Basic Operation

Images and Image Files

Data Analysis

Advanced Operations

Principle of Thermal Imaging

Quick Links

Need help?

Questions and answers

Summary of Contents for MikroScan 7600PRO