Operating; Using The • Mode Options; Bluetooth; Pair To Another Device - MAXTEK 73200 User Manual

Operating

Using the /Mode Button
Once you have connected the adaptor to a suitable mains supply
and the back of the speaker, press the /Mode button to turn the
speaker on. To turn the speaker off press and hold the same button
for a few seconds till the speaker turns off.
Mode Options
When the speaker is turned on you can choose between the
Bluetooth input and AUX input for your audio source by pressing
the /Mode button. The blue LED indicates that the speaker is in
bluetooth mode and the red LED indicates that the speaker is in
AUX IN mode

Bluetooth

Pairing
Once the speaker is turned on it will automatically search for a
device to pair with. Search with your device for 'MAXTEK AUDIO'
and select it to pair. There is no security code so the speaker
should pair automatically once you've selected it.

Pair To Another Device

Press the 'PAIR' button to disconnect the current connected device
and allow another device to pair with the speaker.

Reconnecting

The speaker will automatically attempt to connect to the last device
it was paired with. If it doesn't find the device the speaker will move
on to searching for another device to pair with.
After Sales Support
UK/N.IRELAND HELPLINE N : 01270 508538
O
REP.IRELAND HELPLINE N : 1800 995 036
O
WEBSITE: www.quesh.co.uk
5
EMAIL: enquiries@quesh.co.uk