Driver Installation Guide - ASROCK A55iCafe Manual

2.10 Driver Installation Guide

To install the drivers to your system, please insert the support CD to your optical
drive fi rst. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from up to bottom side
to install those required drivers. Therefore, the drivers you install can work properly.
2.11 Installing Windows
XP 64-bit With RAID Functions
If you want to install Windows
on your SATA / SATAII HDDs with RAID functions, please refer to the document at
the following path in the Support CD for detailed procedures:
..\ RAID Installation Guide
2.12 Installing Windows
XP 64-bit Without RAID Functions
If you want to install Windows
bit OS on your SATA / SATAII HDDs without RAID functions, please follow below
procedures according to the OS you install.
2.12.1 Installing Windows
If you want to install Windows
RAID functions, please follow below steps.
Using SATA / SATAII HDDs without NCQ and Hot Plug functions (IDE mode)
STEP 1: Set up UEFI.
A. Enter UEFI SETUP UTILITY
Confi guration.
B. Set the "SATA Mode" option to [IDE].
®
STEP 2: Install Windows
®
7 / 7 64-bit / Vista
® TM
7 / 7 64-bit / Vista / Vista
®
7 / 7 64-bit / Vista
® TM
7 / 7 64-bit / Vista
®
XP / XP 64-bit Without RAID Functions
®
XP / XP 64-bit on your SATA / SATAII HDDs without
Advanced screen
XP / XP 64-bit OS on your system.
ASRock A55iCafe Motherboard
TM TM
/ Vista 64-bit / XP /
TM
64-bit / XP / XP 64-bit
TM TM
/ Vista 64-bit / XP /
TM
/ Vista 64-bit / XP / XP 64-
Storage
27