Storing And Using Presets - Belkin f8z049 User Manual

Using the TuneBase FM Transmitter
The TuneBase FM transmitter function automatically turns on when the iPod is connected and car power is available. It
automatically turns off when the iPod is removed or car power becomes unavailable.
1. Tune your car stereo frequency to a channel with a weak
broadcast signal. The ideal channel is one that is not
broadcasting a radio program, or is doing so weakly.
2.
Insert your iPod into the TuneBase FM. The iPod backlight will
turn on and the current transmitter frequency will be displayed
on the iPod screen.
3. Press the " " or " Press the "▲ Press the "▲ ▲ ▲" or " ▼" button on the TuneBase FM to select the
transmission frequency chosen in step 1. The frequency will be
visible on the iPod's screen. Pressing and holding either button
will provide faster tuning.
4. After displaying the current frequency for five seconds, the iPod
screen will return to the iPod Main Menu. This will happen after
making any changes to the TuneBase FM's settings. All settings—
including transmission frequency, volume control setting,
and stereo/mono control setting—are permanently stored in
memory at this time.
Note: iPod playback will pause momentarily when entering
and exiting the TuneBase FM control menu. Playback will
quickly resume.
5. Adjust the volume of your FM radio to the desired
listening level.
Using the TuneBase FM Transmitter | 04
�������� �� ��� ����
Frequency
display
Frequency
selector
�������� �� ��� ���� � ������ ������� ���� ���� ������ ��� ���� ����� ��

Storing and Using Presets

1. To store a preset, select the desired frequency using " " or " To store a preset, select the desired frequency using "▲ To store a preset, select the desired frequency using "▲
(1, 2, 3, or 4) for two seconds. An audible beep sounds when the new frequency is programmed*. The iPod display
reflects the change when the memory button is released by showing which memory button was pressed followed
by the frequency saved in that memory position.
* Do NOT remove the iPod from the cradle until it returns to the Main Menu screen or new settings may
not be saved.
2. To select a preset frequency, momentarily press "1", "2", "3", or "4". This instantly tunes the FM transmitter to the
frequency stored in that preset.
�������� �� ��� ����
Memory station display
Memory stations 1 - 4
�������� �� ��� ���� � ������ ������� ���� ���� ������ ��� ���� ����� ��
▲" or " ▼" buttons. Press and hold the desired preset button
▲
�������� �� ��� ���� ����
Frequency display
Frequency selector
������ ��� ���� ����
Storing and Using Presets | 05