Important Safety Instructions WARNING: To avoid fire, shock and serious personal injury, follow these instructions. 1. Read your owner’s manual and safety information before installing your new fan. Review the accompanying assembly diagrams. 2. Before servicing or cleaning unit, switch power off at service panel and lock service panel disconnecting means to prevent power from being switched on accidentally.
This manual is designed to make it as easy as possible to assemble, install, operate, and maintain this ceiling fan Tools Needed for Assembly Materials Wiring and connectors must be of type required by • One Phillips head screwdriver • One small blade local regulations.
Ceiling fan performance and energy savings rely Using the Ceiling Fan Year Round heavily on the proper installation and use of the ceiling Summer Season: Use the ceiling fan in the counter- fan. Here are a few tips to ensure efficient product clockwise direction.
How to Hang This Ceiling Fan WARNING To avoid possible fire or shock, be sure electricity is turned off at the main fuse box before wiring. MAIN FUSE BOX (Figure 1) Figure 1 WARNING CEILING The fan must be hung with at least 2.1m of clearance from floor to blades.
How to Wire This Ceiling Fan Ceiling fans must be installed by a licensed electrician. WARNING To avoid possible fire or shock, be sure electricity is MAIN FUSE BOX turned off at the main fuse box before wiring. (Figure 1) Figure 1 Securely attach the 9-pin connector from the hanger bracket to the wire harness socket of hanger ball.
Installing the Canopy Housing NOTE: This step is applicable after the neccessary wiring is completed. 1. Loosen the two shoulder screws without fully removing it in the hanger bracket. Assemble canopy by rotating key slots in canopy over shoulder Ceiling Canopy screws in hanger bracket.
Final Fan Assembly NOTE: If you are installing the fan along with the Linea 4 Light Kit ( sold separately), disregard the step and refer to the light kit's instruction manual for how to complete assembly. Motor assembly End Plate Assembly Figure 1 Maintenance Periodic cleaning of your new ceiling fan is the only...
Parts List Model FP6722**AU Ref. # Description Part # Hanger Bracket Assembly with Screws AP255BL-6722AU Motor Assembly AMA6722**AU ADR1-6**-220 Ball Downrod Assembly Canopy P672210** Canopy Screw Cover Assembly AP260** APPAC1402** Motor Coupler Cover Assembly AP6722**AU Motor Housing Assembly Blade Set AP672204** End Plate Assembly AP672205**...
The Modn-4 ™ Model FP6722**AU Exploded-View Figure 1 NOTE: The illustration shown is not to scale or its actual confi guration may vary. Product/parts are subject to change without notice.
Trouble Shooting WARNING For your own safety, turn off power at fuse box or circuit breaker before trouble shooting your fan. Some suggested remedies require the attention of a licensed electrician. Trouble Probable Cause Suggested Remedy 1. Fuse or circuit breaker blown. 1.
Modn-4 Ceiling Fan Light Kit Installation Instructions READ AND SAVE THESE INSTRUCTIONS For Fan Model FP6722**AU Weight: 0.95 kgs (2.09 lbs) NOTE: Ceiling fan light kits are only meant to be used with ceiling fans. Do NOT install as a light fixture. NOTE: All wiring and installation procedures must comply with AS/NZS 3000 Wiring Rules and any local regulations.
Need help?
Do you have a question about the The Modn-4 and is the answer not in the manual?
Questions and answers