2-18. MEMORY (DIMM)
2 memory (DIMM)
Note 1: In opening the clips,
hold lightly the top of the memories
with your fingers to prevent a drop.
Note 2: In removing the memories,
always start from the one
having largest bank number.
Note : Remove FDD first,
or your cannot install/
remove the memory.
• MEMORY (DIMM) INSTALLATION
memory
(DIMM)
clip
DIMM socket
clip
slot
(2 places)
2-11
boss
(2 places)
Note 1: With the clips left open, insert the
memories so that bosses (2 places)
of DIMM socket engage with slots (2
places) of memories.
Note 2: Make sure that the clips are closed
when the memories were inserted
completely.
Note 3: Insert the memories, starting from the
one having smallest bank number.
1 Open two clips.
PCV-E314DS