Download Print this page

Warranty; Copyright, Trademarks - Box-Design DS2T Instructions For Use Manual

Cd box

Advertisement

Technical specifications Pro-Ject CD Box DS2T
Supports:
Digital output:
Trigger input:
Trigger output:
Outboard power supply:
Power consumption:
Replacement battery remote control:
Dimensions W x H x D (D with sockets): Aluminium version:
Weight:
Service
Should you encounter a problem which you are not able to alleviate or identify, please contact your dealer for
further advice. Only if the problem cannot be resolved there, the unit should be sent to the responsible
distributor in your country.

Warranty

The manufacturer accepts no responsibility for damage caused by not adhering to these instructions
for use. Modification or changes to any part of the product by unauthorized persons release the
manufacturer from any liability over and above the lawful rights of the customer.

Copyright, trademarks

Pro-Ject Audio Systems is a registered Trademark of
H. Lichtenegger.
This guide was produced by: Pro-Ject Audio Systems
©
Copyright
2017. All rights reserved.
®
TOSlink
is a registered trademark of Toshiba corporation.
Laboratories. DTS
is a registered trademark of DTS, Inc.
6
© Pro-Ject Audio Systems · Pro-Ject CD Box DS2T · Revision 2017.03.31
CD, CD-R, CD-RW and Hybrid-SACD
1 x optical (TOSlink
, S/PDIF)
®
1 x co-axial (S/PDIF)
1 x AES/EBU
12V on/off detector
12V
9V/2.000mA DC; suitable for your country's mains supply
300 - 1.500mA DC, <1W in standby
1 x CR2032 / 3V or 1 x CR2025 / 3V
Wood version:
Aluminium version:
Wood version:
The information was correct at the time of going to
press. The manufacturer reserves the right to make
changes to the technical specification without prior
notice as deemed necessary to uphold the ongoing
process of technical development.
Dolby
206 x 71 x 199 mm
240 x 72 x 199 mm
1620 g without power supply
2070 g without power supply
®
is a registered trademarks of Dolby

Advertisement

loading