Replacing An Ink Cartridge - Epson stylus photo 1410 Reference Manual

The nozzle check pattern prints:
5. If there are no gaps in the pattern, click
If there are still gaps, or the test patterns are faint, click
head again.
If you don't see any improvement after cleaning four times, turn the printer off
and wait at least 6 hours. This allows any dried ink to soften. Then, try cleaning
the print head again.
If you still don't see any improvement, refer to Problems and Solutions.

Replacing an Ink Cartridge

■
When the red
■
When the red
You'll also see a message on your screen when you print telling you which cartridge is
low or expended.
When a cartridge is more than six months old, you may need to replace it if printouts
don't look their best. If the quality doesn't improve after cleaning and aligning the
print head, you can replace the cartridge even if the red
Checking the Ink Status
Purchasing Ink Cartridges
Ink Cartridge Precautions
Removing and Installing Ink Cartridges
82
Print head does
not need to be
cleaned:
Print head
needs to be
cleaned:
ink light flashes, one or more ink cartridges are low on ink.
ink light stays on, you need to replace one or more cartridges.
.
Finish
Clean
ink light is off.
to clean the print