Chapter 1 Product Overview
10
LAN Port
11
Internet Port
12
LAN LED (Green)
On:
Blinking:
13
Internet LED (Green)
On:
Blinking:
14
Power button
15
DC connector
Bottom
16
Reset button
17
Setup card slot
Connect your computer, hub, or other Ethernet devices to these ports.
This switching hub supports 10 Mbps,100 Mbps, and 1000 Mbps
connections.
10 Mbps, 100 Mbps, and 1000 Mbps connections are supported.
Note: In bridge/AP mode (router off ), the Internet port becomes a
regular LAN port, for a total of 5 usable LAN ports.
An Ethernet device is connected.
An Ethernet device is communicating.
The Internet port is connected.
The Internet port is transmitting data.
This button turns the power on and off.
Connect the included AC adapter here.
To reset all settings, hold down this button until the Buffalo LED turns red
(about 3 seconds). The power must be on for this to work.
This is the slot where the AirStation setup card is stored. The initial
settings for the username, password, SSID, and encryption type are
provided on the card for logging into the configuration interface.
16
17
- 9 -