Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Holatek A2
Summary of Contents for Holatek A2
- Page 1 Smart Projector HOLATEK-A2 User Manual...
-
Page 2: Table Of Contents
HOLATEK Home Theatre Instructions Content Safety Instructions Operation Instructions About Lamp Other Instructions Summary Packaging List Control Positions and Functions Top/Front/Left Bottom Back Control Panel Remote Control Functions Projection Image Installation Adjusting Projection Size Projection Instructions Basic Operations Starting and Stopping the Machine... - Page 3 Safety Instructions Thank you for using HOLATEK Product. Read carefully the following Safety Instructions before using this product. Keep the User Manual after reading for future reference. Safety Symbol The User Manual use graphical symbols in order to avoid injury to persons or property.
- Page 4 2. Unplug the power plug. 3. Contact your dealer or HOLATEK service center. ●Power Cord Misusing the power cord may cause the fire and electric shock. Take the following precautions: 1. Use AC voltage and make sure outplace voltage is corresponding to the rated voltage of the machine.
- Page 5 Take the measures immediately as follows: 1. Turn off the power. 2. Unplug the power plug. 3. Contact your dealer or HOLATEK service center. ● Burning Do not discard the machine by burning. Explosion, fire and personal injury may result.
- Page 6 Otherwise cause electric shock, scalding and personal injury may result. Make sure refer all the internal checking, debugging and repair works to your dealer or HOLATEK service center. Do not wet the remote control. Fire and electric shock may result.
- Page 7 power cord from the outlet. ● Important Data Backup Backup all the data reserved in the machine memory. The data reserved in the machine memory may be lost because of malfunctions, repair and so on. ● Refraction Effects No fish tank or any other object that has refracting effects in front of the lamp. Fire may result.
- Page 8 If the interior of the machine has not been cleaned for a long time, dust may build up, which may cause fire and malfunctions. Contact the dealer or HOLATEK service center one time every year for cleaning the interior of the machine. Notice that this cleaning service is chargeable.
- Page 9 High humidity areas Areas where temperature may change suddenly Areas where is a lot of dust Shaky, slant or unstable areas Areas where may be got wet ● Do not use the machine in the following areas, otherwise may cause the malfunctions and damages on the machine.
- Page 10 Make sure the machine is not hot before taking it into the carrying bag. OpenPackage Unpack the package box, and check below items is complete. AC power cord HOLATEK Home Theater Remote control AV-IN cord mini VGA cord User Manual...
-
Page 11: Control Positions And Functions
Software Installation Computer software driver can be downloaded on the HOLATEK website. Download link: http://www.holatek.cn/supports.html ControlPositionsandFunctions [Top/Front/Left] Power On/Off Inlet Control Inlet USB2.0 Infrared remote Outlet LED Lens [Bottom] Adjustable pin... -
Page 12: Back
Support [Back] HDMI Speaker Speaker VGA Input Speaker Input AV-IN Infrared remote sensor [Control Panel]... -
Page 13: Remote Control Functions
Menu Enter Disk Source Wi-Fi signal RemoteControlFunctions ① Power On/Off PC and Projector Enter ② Menu setup Source Right... - Page 14 ③ Left ④ Mute ⑤ Down ⑥ Volume ⑦ 3D module menu ⑧ 3D Left/Right Eye Switching ⑨ ⑩ Power On/Off Machine Remote Control Range Both in the front and back of the machine have infrared remote (IR) sensors. Hold the remote control;...
-
Page 15: Projection Image
ProjectionImage Installation Adjusting Projection Size Longer the distance between the home theater projector and the wall, bigger the machine image size. Refer to the table below to obtain the best size image 屏幕 screen 投影屏尺寸 projection screen size 镜头中心 lens center 投影距离... -
Page 16: Projection Instructions
There may be a slight different between the designed value and practical value in the table. NOTE! The lens of the machine is adjustable, the max tilt is up 40 angle （+40°）,and max tilt down 40 angle（—40°) Auto correcting keystone range record is 0±40 angle. If the image tilts downward, use the manual correcting keystone to adjust the image. - Page 17 Outlet Inlet Inlet Reserve enough space; do not block the inlet and outlet. The outlet is extreme hot when the machine is in process. Do not touch it with hand. It is also extreme hot near the outlet. Never place the plastic or any other object that are sensitive to heat near or below the machine.
-
Page 18: Basic Operations
Airflow from the air conditioner will blow the heat exhausted by the lens, which cause heat wave in the image. Adjust the air conditioner or move the machine if this situation turns up. Do not place it on one of its side to use the machine, malfunctions may result. - Page 19 Do not share the outlet with other devices. Make sure the rated current corresponds to power consumption of this machine if using extension cord. Do not use the bundled power cord Do not place objects on the power cord or step on it. Do not pull the power cord.
-
Page 20: Selecting Language
SelectingLanguage Chinese is the default language when the first time to turn on the machine, follow the steps if you need to change into other languages. Use the control panel or remote control, press [MENU], and press[∨] or [∧] to select [Machine setup1], then press [ENTER] to select the language, and then press [MENU] to confirm the selection. -
Page 21: Manual Correcting Keystone
Set the menu “Machine setup1→Auto correcting keystone” to “On”, and machine checks main body of the image in vertical direction, then auto adjust the shape to oblong. The range of Auto correcting keystone is ±40° Manual Correcting Keystone [KEYSTONE+] or [KEYSTONE－] on the remote control to correct keystone. -
Page 22: Switching 3D Left/Right Eye
Switching 3D Left/Right Eye If you feel uncomfortable or the images have no 3D effect when watching 3D film, use [3DL/R] on the remote control to adjust. Turning off 3D Press [3D] on the remote control to select [2D], and press [ENTER] to turn off 2D TO 3D function. -
Page 23: User Maintenance
UserMaintenance AboutLamp If the lamp does not turned on, contact you dealer or HOLATEK service center and refer them to change. Notice that those malfunctions caused by disassembling or modifying by yourself are out of the range for warranty, HOLATEK do not supply... -
Page 24: Indicator
Indicator Troubleshooting Check the following items if the machine has any problem: The machine does not turn on Cause Solution Meaning Indictor Display lit orange AC power is connected and ready for start. lit blue PC is turned on and standby lit white Disc is connected and standby Disc is operating. - Page 25 1. Unplug the power cord and wait more than 10 minutes. 2. Plug the power cord back and restart the machine. If the machine is still abnormal after operating the above instructions , send the machine to your dealer or HOLATEK service center...
-
Page 26: Specification
Specification The specification may be changed without further notice. Optical Parameters Machine Brightness (lumina) 1000 Weight Approx. 1.5 kg Machine system Net size length：204mm DLP chip Size： 0.45 width：143mm （Texas inch height：35mm Instruments） Pixel： Electricity WXGA Power DC 19V/4.74A （1280× Power 50W（Max）... -
Page 27: Warranty And Copyright Information
HOLATEK Ltd. Co. Disclaimer HOLATEK Ltd. Co. does not make any other warranty or condition of any kind, whether express or limited warranty or conditions of merchantability, and fitness for a particular purpose. HOLATEK Ltd. Co. reserves the right to revise and amend the user manual at any time content without further notice. - Page 28 WARRANTY CERTIFICATE Thank you for purchasing HOLATEK product According to this warranty statement, during the applicable warranty period, HOLATEK provides free repairs to all the malfunctions that are caused by product quality under circumstance of normally use.
- Page 29 (the files are built up by registering online after purchase) 2. You can go to any maintenance center (refer to the official website) in your country to replace or repair the product. 3.You can post to HOLATEK Ltd. Co. to replace or repair the product.
- Page 30 4. According to “Three guarantees” , for those products which are in the range of being replaced, HOLATEK Ltd. Co. will offer the same model and the same specification product to replace free of charge. Service hotline：400-622-0138 Original Product Name: Product Model No.:...
- Page 31 Stick the invoice on this page to prevent it being lost or missing, it increases the troubles when you go to repair if the invoice is lost or missing. Taking this manual by hand must be convenient for repairs and inquiry.
- Page 32 -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. SHENZHEN HOLATEK CO.,LTD.2012 Printed in China...
Need help?
Do you have a question about the A2 and is the answer not in the manual?
Questions and answers