Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Icemoon Wi-Fi Camera Power Bank
Summary of Contents for Icemoon Wi-Fi Camera Power Bank
- Page 1 User Manual Wi-Fi Camera Power Bank Power Bank...
-
Page 2: Table Of Contents
URN ON LIGHTS 2.5 R ............... 3 ESET PRIMARY FUNCTIONS ........4 3.1 S ..4 CAN THE TO DOWNLOAD THE PP ICEMOON 3.2 O ....5 PEN THE CHOOSE AMERA 3.3 T ONNECT AMERA AND CONNECT THE CAMERA TO (UID). -
Page 3: Overview: Buttons And Lights
1. Overview: Buttons and Lights... -
Page 4: Conditions And Preparations
2. Conditions and Preparations 2.1 Insert Micro SD card Hold golden fingers of the Micro SD Card towards the specifications, and then insert it into the slot. 2.2 Power on/off the camera 2.2.1 Power on: Press button B (Power Button) yellow lights alternately flash, it will create a hotspot... -
Page 5: Turn On/Off Led Lights
2.4 Turn on/off LED lights After it power on for 10s, you can press LED Switch button to turn on the LED lights. Press it again to turn it off. 2.5 Reset If the camera performs abnormally, use a pin to press and hold the Reset button in the hole for 5s to reset it. -
Page 6: Primary Functions
3. Primary Functions Download the App icemoon, go step by step to , go step by step to set it up. Please notice: 1. It only supports 2.4G Wi Please notice: 1. It only supports 2.4G Wi-Fi network. 2. The default password of the password of the camera is 8888. -
Page 7: Open The App, Choose Wi-Fi Camera
3.2 Open the App, choose Wi-Fi Camera. -
Page 8: Tap Connect Camera , And Connect The Camera To
3.3 Tap Connect Camera, and connect the 3.3 Tap Connect Camera, and connect the camera to hotspot (UID). -
Page 9: Please Choose The Way Of Connecting
3.4 Please choose the way of connecting. 3.4 Please choose the way of connecting. Way1 Connect device to wireless router In this way, you can view real-time video time video anywhere. - Page 10 Choose your Wi-Fi, enter its password and Fi, enter its password and then join.
- Page 11 Tap the icon to enter Device List. Way2 Connect directly by Point-to-Point Your smartphone can connect directly by Point-to-Point (hotspot) when your smartphone is near. In this way, it can’t support viewing real-time video remotely. Tap the icon right to enter Device List.
- Page 12 If you want to connect your camera to Wi- -Fi, please go to Device list> please go to Device list> Settings>Device Settings>Device Settings>Wi-Fi Settings.
-
Page 13: Device List
3.5 Device list Tap it to add a new device Tap it to add as many as 4 cameras in a interface Motion detection is enabled Motion detection is disabled Tap it to enter Settings... -
Page 14: Device Settings
Tap it to view real-time video Tap it to view snapshots captured in the Tap it to view snapshots captured in the real-time video interface Tap it to view videos recorded in the real-time video interface or Micro SD card Micro SD card Tap it to view photos taken when it is alarming... - Page 15 you. Warming Tone: After enabling motion Warming Tone: After enabling motion detection (Motion detection sensitivity is detection (Motion detection sensitivity is not set to “disabled”), you can enable the ), you can enable the camera to send out alarm sound or not. camera to send out alarm sound or not.
- Page 16 When it sounds an alarm, you can tap the icon to stop it. E-mail Alert: After enabling motion detection, you can enable or close the E-mail alarm. Just go to “Email Settings” to set it, then it will send you photos shot at the moment it detects the moving object.
- Page 17 functionality, it will display current time in the app. Certain types with smoke/ gas detection functionality have a more item to enable or disable smoke/ gas detection alarm. After setting, please tap “OK” to save it. 3.6.2 SD Card Record Settings ...
- Page 18 please choose “All day”. If you choose “On alarm”, you need to enable motion detection. You can also choose “Timing Record” to set a time only in which it records videos into Micro SD card. Resolution: You can choose the resolution ...
- Page 19 After setting, please tap “OK” to save it. 3.6.3 Email Settings Type in E-mail addresses for a sender and as many as 4 recipients. And fill in “User” and “Password” blanks with the sender’s E-mail addresses corresponding password, respectively. Then tap “OK” to save it.
-
Page 20: Live Video
3.7 Live Video Tap the screen to unhide the icons. Adjust the brightness of the live video Adjust the contrast of the live video Enable or disable IR lights(for some types) Enable or disable IR lights(for some types) Adjust the quality of the live video Enable or disable speaker Snapshot Record video into your smartphone... -
Page 21: Specifications
with two way audio) 4. Specifications Video Resolution 1920*1080 Frame Frequency 25FPS Video Format AVI Charging Voltage/ DC 5V/1-2A Current Support Wi-Fi 802.11bgn 2.4GHz Mode Charging Time 5h (When off) iOS, Android, Support System Windows PC Capacity 2000mAh Hotspot Range 10m Wi-Fi Receiving Range 10-15m Last after Fully Changed...