3.1.3 Stop recording: Press "Video" button
again, the blue light turns on, it will
automatically save the file and go back to
standby mode.
3.2 Take a photo
3.2.1 Turn on the camera. And press the
"Power" button on the remote once to get it
into standby mode.
3.2.2 Press "Photo" button. The blue light
flashes once; it will take and save a photo. And
then the blue lights on, it will go back to
standby mode.
3.3 Motion detection video recording
3.3.1 Turn on the camera. And press the
"Power" button on the remote once to get it
into standby mode.
3.3.2 Motion detection standby mode: Press
"Motion Detection Video Recording" button,
the blue light turns off. The camera is on
motion detection standby mode.
When a movement is detected by the camera,
5