Contents OVERVIEW: BUTTONS AND LIGHTS .... 1 CONDITIONS AND PREPARATIONS ....2 2.1 I ........2 NSERT ICRO CARD 2.2 T ........ 2 URN ON OFF THE CAMERA 2.3 B .......... 3 ATTERY HARGING 2.4 R ............. 4 ESET PRIMARY FUNCTIONS ........ 4 3.1 R ..........
2. Conditions and Preparations Open the back cover, and remove the plastic slip between the battery and its electrode. 2.1 Insert Micro SD card Hold golden fingers of the Micro SD Card downwards, and then insert it into the slot. 2.2 Turn on/off the camera 2.2.1 Turning on: Slide the switch to “ON”.
off after 2min. 2.2.2 Standby mode: Press the “Power” button on the remote once, the blue light keeps on, then the camera will go into standby mode. If there are no operations, the camera will also turn off after 2min. 2.2.3 Turning off: Press the “Power”...
Take note that it can’t work when you connect it to your PC, which means it will not response to what you do with the remote controller. You can charge it by your adapter when the camera is running. 2.4 Reset If the camera performs abnormally, slide the switch to “OFF”...
3.1.3 Stop recording: Press “Video” button again, the blue light turns on, it will automatically save the file and go back to standby mode. 3.2 Take a photo 3.2.1 Turn on the camera. And press the “Power” button on the remote once to get it into standby mode.
the camera will start capture video. It will save a video every 3min. If no movement detected, the camera will go back to motion detection standby mode. 3.3.3 Stop recording: Press “Motion Detection Video Recording” button again, the blue light turns on, it will go back to standby mode.
means it goes into U-disc mode, just like when you insert a card reader into your PC USB port. Just open it, you will find what you have recorded. Also, you can remove Micro SD card from the camera, and use your card reader to connect to your computer.
4.1.2 Open the TXT file, type in the time as following format and then save the file: [Year/Month/Date]<A space is required>[Hour:Minute:Second] For example, 2016/06/01 12:00:00 Then, disconnect the camera from your PC, turn it on, the camera will automatically sync the time.
Page 11
4.3.1 Current time settings 4.3.1.1 In the time display mode, press "SET" button, it displays "2010" and goes to Year setting mode. You can press "UP" or "DOWN" button to choose values. 4.3.1.2 Press "SET" button again to set Month, press "SET"...
Page 12
and press "SET" button for the fourth time to set the alarm sound. You can press "UP" or "DOWN" button to choose values. Alarm setting mode Set Alarm Hour Set Alarm Minute Set the snooze Set the alarm sound time interval 4.3.2.3 Press "MODE"...
Page 13
the alarm time and snooze time interval settings, it will perform alarm and snooze at the time you set. Alarm Off Alarm On Snooze on After enabling alarm, when you press “MODE” button, it will display alarm time you set. Press “UP”...
Page 14
Celsius Fahrenheit 4.3.4 Timekeeping: In the current time mode, press the "TALK" button, it will tell the current time. 4.3.5 Natural sound appreciation function 4.3.5.1 In any mode, press the "TIME" button to set time for appreciating the natural sound (10-60minutes).
appreciation mode. 5. Specifications Video Resolution 1920*1080 Frame Frequency 30FPS Video Format AVI Photo Resolution 1920*1080 Install Driver No Built-in Memory No Save Video File Every 3min Charging Time 5h Charging Voltage/ DC 5V/1-2A Current Windows XP or Support System later, Mac OS X 8GB for Continuous Recording...