1
Change the text input method
To switch (toggle) between predictive and traditional text input modes
while you are editing a message, press the Pound key
until the icon indicates the mode you want to use. You must activate
predictive text before you will be able to toggle between the two modes.
Tip: If you don't want to use predictive text input mode at all, deactivate
it. You can reactivate it later.
Deleting characters
When you need to delete characters use one of these methods:
•
To delete one character to the left of the cursor, press Clear.
•
To delete all characters in the message, press and hold Clear.
Changing letter case modes
You can switch (toggle) between uppercase
letter mode by pressing the Pound key
If the predictive text mode is active and you don't wait at least 1.5
seconds between key presses, the text input mode will also be switched
between traditional and predictive text.
If predictive text mode is active when you create a new message, the first
letter of the first word that you enter will be uppercase.
Entering numbers
When you enter numbers, use either of these methods:
•
For one or a few numbers, press and hold the respective number key.
•
For many numbers, change to number entry mode
the Pound key
and lowercase
.
) and enter the numbers as usual.
[ 40 ]
several times
(press and hold