Philips 201P User Manual page 67

201P The OSD Controls
8) To adjust the parallelogram, press the
9) When the parallelogram is adjusted, press the
BACK TO MAIN WINDOWS will be highlighted.
10) Press the button to return to the MAIN CONTROLS window, or press the
IMAGE is highlighted.
After returning to MAIN CONTROLS . . .
...to continue to ROTATE IMAGE, start with step 5 under ROTATE IMAGE and follow the
directions.
...to exit completely, press the
Smart
Help
...to adjust only the PARALLELOGRAM, follow steps 1 - 4 above, then press the
button, and follow steps 7 - 9.
ROTATE IMAGE (Not available in all models)
ROTATE IMAGE under ADJUST SHAPE allows you to adjust one of the five preset options. These two
options are PINCUSHION and BALANCED pincushion. Note: use this feature only when the picture is not
square.
1) Press the button on the monitor. The MAIN CONTROLS window appears.
2) Press the button until ADJUST SHAPE is highlighted.
file:///G|/manual/english/201P/osd/osd_cont.htm (15 of 32) [10/16/1999 6:36:37 AM]
or button.
button to return to the ADJUST SHAPE window.
button twice.
button until ROTATE