Philips 201P User Manual page 60

201P The OSD Controls
4) Press the or
5) When the position is adjusted, press the
to highlight ADJUST SIZE.
6) To adjust the horizontal size, press the
7) When the size is adjusted, press the
CONTROLS will be highlighted.
After returning to MAIN CONTROLS . . .
. . . to continue to ADJUST VERTICAL, press the
highlighted. Next, start with step 3 under ADJUST VERTICAL and follow the directions.
Smart
Help
. . . to exit completely, press the
ADJUST VERTICAL
ADJUST POSITION under ADJUST VERTICAL shifts the image on your screen either up or down. Use this
feature if your image does not appear centered. ADJUST SIZE under ADJUST VERTICAL expands or
controls the image on your screen, pushing it out toward the top or bottom or pulling it in toward the center.
1) Press the button on the monitor. The MAIN CONTROLS window appears.
file:///G|/manual/english/201P/osd/osd_cont.htm (8 of 32) [10/16/1999 6:36:37 AM]
button to move the image to the left or right.
or
button to return to MAIN CONTROLS window. CLOSE MAIN
RETURN TO TOP OF THE PAGE
button to return to MAIN CONTROLS window, or press the
button.
button until ADJUST VERTICAL is
button