En.qxd 31-08-2005 11:59 Pagina - Philips 32PF9967D/10 Manual

24571.1 en.qxd 31-08-2005 11:59 Pagina 25
E.g. in
Relaxed
change is smoothly and soft which gives you a more immersive
yet relaxed viewing.
Ambiance is the rate of brightness and colour change as
predefined in the factory.
will influence the perception of a movie whereas
Movie
mode will influence the dynamic impression.
Action
Notes:
- The rate of change is limited, as not to cause uncomfortable
sensations.
- According to the selection made, some Ambilight menu items will be
downlighted and can not be selected.
Ambilight in Standby mode
When the TV is switched off, the ambient lights will also be
switched off.When the TV is in standby mode, ambilight can be
used to provide a unique ambience for the room. Press the
ambilight on/off key on the remote control to switch between
Ambilight Off or On.
Infrared interference on external devices
To avoid bad remote control reception, place your external
devices out of sight of the ambient lights of your TV set.
Note: Ambilight does not function well when the room temperature is
less than 15°C.
Smart Colour modes:
• : Select any Colour or hue to match to your personal
Personal
taste, e.g. your interior, the program content (sports, movie,
etc.), the mood you are in, etc.
• Warm white :The Colour is matched to that of most normal
lightbulbs. Select this setting if you want the Ambilight to fit
best with normal living room lighting.
• :The Colour is matched to that of normal daylight
Cool white
(6500K). Select this setting if you prefer more cool lighting.
Note: the 6500 K is the SMPTE recommended setting for ambient
backlighting of displays.
• Blue :The blue Colour is preferred by most consumers to
create a cool, modern and /or mystical atmosphere. Select this
setting according to your personal taste or mood.
mode, the rate of brightness and colour
25