G:\Work\SONY\TV\847342S DMX-WL1T\0724\387708311DMX-
WL1\030GET.fm
010COV.book Page 7 Thursday, July 24, 2008 2:04 PM
Overview of the Button, Parts and Indicators
Receiver Unit
Front side
Rear side
Item
1 POWER / POWER
LED
2 DC IN 9V
3 HDMI OUT
4/5 SERVICE
1
POWER
2
3
4
DC IN 9V
OUT
SERVICE
Description
Press to turn the receiver unit on and off, if Control for HDMI of the TV is Off.
Lights up green when the receiver unit is turned on.
~
• The power of the receiver unit turns on or off in conjunction with TV if Control for
HDMI setting of the TV is On and the unit is connected to the TV by HDMI cable.
You cannot turn the power of the receiver unit on or off by pressing POWER on the
unit.
• If POWER LED of the receiver unit does not light up, confirm Control for HDMI
setting of the TV is On.
• If Control for HDMI of the TV is Off, you must turn the power of the receiver unit on
or off by pressing POWER on the unit.
• The supplied remote control cannot be used to turn on or off the receiver unit
Connects to the supplied AC power adapter with AC cord.
Connects to the HDMI input of the TV.
HDMI (High-Definition Multimedia Interface) provides an uncompressed, all-digital
audio/video interface between the receiver unit and the TV.
~
• Be sure to use only an HDMI cable that bears the HDMI logo.
These jacks are for service only.
masterpage:Right
5
SERVICE
DMX-WL1
3-877-083-11(1)
7