Sony DMX-WL1 Reference Manual page 21

G:\Work\SONY\TV\847342S DMX-WL1T\0724\387708311DMX-
WL1\050OTH.fm
010COV.book Page 21 Thursday, July 24, 2008 2:04 PM
Condition
Remote control does not work
Connected equipment does not
work
Receiver unit cannot turn off the
power
No sound of IN 1 HDMI AUDIO
Explanation/Solution
• Check the polarity of the batteries or replace the batteries.
• When some functions do not work, operate with the remote control of your
equipment.
• The supplied remote control is universal. For the corresponding equipment, see
Web site.
• Not all operations are guaranteed even for equipment from manufacturers
supported by this unit.
• The supplied remote control cannot be used to turn on or off the receiver unit
separately from the TV.
• If you use a new remote control, press CONNECT and INPUT SELECT at the
same time and hold few seconds, then the Initial Setup menu will appear.
Follow the instructions to complete initial setup.
• Put the IR Blaster in a location visible to the IR receiver of the equipment.
• The power of the receiver unit turns on or off in conjunction with TV if HDMI
Control or Control for HDMI of the TV is On and the unit is connected to the
TV by HDMI cable.
• IN 1 HDMI AUDIO input is available only when IN1 HDMI has no audio data.
masterpage:Right
21
DMX-WL1
3-877-083-11(1)