GE 350 Communications Manual page 54

DNP ETHERNET PROTOCOL SETTINGS
NOTE:
3-18
SETTINGS
DNP Object 1 Default Variation
DNP Object 2 Default Variation
DNP Object 20 Default Variation
DNP Object 21 Default Variation
DNP Object 22 Default Variation
DNP Object 23 Default Variation
DNP Object 30 Default Variation
DNP Object 32 Default Variation
DNP TCP Connection Timeout
Fault Report Mapping in DNP/104 Disabled
The setting DNP Unsolicited Response Timeout affects DNP TCP clients only; not serial
and UDP clients. Possible values that can be selected for this setting lie between 0 and 60
seconds.
In addition to this selected timeout, up to an additional 10 seconds is required to send
the response packet.
Table 3-2: DNP point list
SETTINGS
Binary Input Point 0 Entry
Binary Input Point 63 Entry
Analog Input Point 0 Entry
Analog Input Point 0 Scale Factor 1
Analog Input Point 0 Deadband
Analog Input Point 31 Entry
Analog Input Point 31 Scale Factor 1
Analog Input Point 31 Deadband
Binary Output Point 0 ON
Binary Output Point 0 OFF
Binary Output Point 15 ON
Binary Output Point 15 OFF
• The DNP Time Sync IIN Period setting determines how often the Need Time Internal
Indication (IIN) bit is set by the 3 Series relay. Changing this time allows the 3 Series
relay to indicate that a time synchroniztion command is necessary more or less often
PARAMETER RANGE
2 1 ; 2
2 1 ; 2
1 1 ; 2 , 5 ; 6
1 1 ; 2 ; 9 ; 10
1 1 ; 2 , 5 ; 6
1 1 ; 2 , 5 ; 6
1 1 ; 2 ;3 ; 4
1 1 ; 2 ;3 ; 4
120 s 10 to 300 s
Disabled, Enabled
PARAMETER RANGE
Select entry Operands
from a list
Select entry Operands
from a list
Select entry Analog parameters
from a list
0.001 ; 0.01 ; 0.1 ; 1 ; 10 ; 100 ;
1000 ; 10000 ; 100000
30000 0 to 100000000
Select entry Analog parameters
from a list
0.001 ; 0.01 ; 0.1 ; 1 ; 10 ; 100 ;
1000 ; 10000 ; 100000
30000 0 to 100000000
Select entry Virtual Input 1 to 32 and Force
from a list Coils
Select entry Virtual Input 1 to 32 and Force
from a list Coils
Select entry Virtual Input 1 to 32 and Force
from a list Coils
Select entry Virtual Input 1 to 32 and Force
from a list Coils
SR3 SERIES PROTECTIVE RELAY PLATFORM – COMMUNICATIONS GUIDE
CHAPTER 3: ETHERNET INTERFACE
FORMAT
F1
F1
F78
F79
F80
F81
F82
F83
F1
F126
FORMAT
FC134B
FC134B
F88
F85
F9
F88
F85
F9
F86
F86
F86
F86