Philips bSure 1 User Manual page 45

XP cClear10 English (good) 24-07-2003 15:52 Pagina 45
Poor colour
Image is blurred
Picture rolls
No sound
Philips Multimedia Projector
7.Troubleshooting
In Data mode
– Input resolution is too high (and keystoning is applied).
• If you wish to keep the keystone correction, decrease the input resolution until the image is
correctly displayed. For this, refer to the User Guide or support information of the
computer.
• If you wish to keep the input resolution as it is, decrease keystoning until the image is
correctly displayed. For this, use 'Keystone correction' option in the 'Settings' menu.
– Input resolution is too high (and no keystoning is applied).
• Decrease the input resolution until the image is correctly displayed. For this, refer to the
User Guide or support information of the computer.
In case of RGBS (Scart) connection
– RGBS is not selected or Auto Source is activated (does not recognize RGBS).
• Select RGBS as projection source with the Source button on the projector or the remote
control.
In case of external monitor connection
– In case of interference problems when connecting to an external monitor, applying long VGA
cables or interference with certain monitor type's, the use of an active splitter is recommended
• Adjust 'Brightness', 'Contrast', 'Saturation' or 'Hue' (see 'Picture adjustment' under 'Operation'
- 'On Screen Display Menu').
• Reset all projector settings in the
– Image is not focused.
• Adjust focus ring.
– Distance between projector and screen is not correct.
• Adjust the distance between the projector and the screen.
– Signal cable is not correctly connected.
• Connect signal cable correctly.
– Signal cable is not correctly connected.
• Connect signal cable correctly.
– Audio cable is not correctly connected.
• Connect audio cable correctly.
– Volume is not adjusted properly.
• Adjust volume.
– (A/V-)Mute active.
• Cancel (A/V-)Mute.
In case of USB connection
– The Cd-rom player in your computer does not recognize the USB port of the computer as audio
output.
• Select USB audio as active audio output on your computer. For this see the User Guide of
the computer.
45
'Settings' menu ('Factory settings').
>
English User guide cClear