Table of Contents
Advertisement
Quick Start
Model 2252
See the Owner's Manual for full details.
WARNING
DO NOT CHARGE THIS UNIT USING AN AC/DC ADAPTER WITH REGULAR
BATTERY INSTALLATION
Figure 1
Figure 2
2. Remove the BATTERY COMPARTMENT COVER from the BATTERY
COMPARTMENT. See Figure 3.
3.
(batteries not included) following the polarities as shown in Figure 4.
4. Reinstall the BATTERY COMPARTMENT COVER and return the BELT
The COMMUNICATOR has a built in POWER SAVER feature for maximum
battery life. But when the
COMMUNICATOR
battery power by pressing the
POWER
button to OFF. Remove the batteries if
the unit will not
be used for a long period of time.
Modelo 2252
FIGURA 1
FIGURA 2
1.
3.
is not being used, conserve
Quick Start
Turning the Unit ON
Press and hold the
POWER
button. The unit will "beep" and the
2r5
Screen will display
then the current channel.
Turning the Power On/Off
Press and hold the
POWER
button. The unit will "beep" and the LCD
Screen will turn blank.
Adjusting Speaker Volume
Press the
UP
button to increase the volume.
Press the
DN
button to decrease the volume.
The speaker volume level is indicated by the number of bars displayed
in the upper right corner of the LCD.
Receiving a Signal
The unit is continuously in the RECEIVE mode when the unit is ON
and not transmitting. When you receive a signal on the current
channel, the
icon is displayed. (See "LCD Screen" for details.)
Transmitting a Signal
1.
Check the channel activity by pressing and holding the
button. You'll hear static if the channel is unoccupied.
TRANSMIT if someone is talking on the channel. Press and hold the
TALK
button to TRANSMIT. The
icon is displayed. Hold the unit
in a vertical position with the MICROPHONE 2 to 3 inches (5 to 7.5)
from the mouth.
2.
While holding the
TALK
button, speak into the unit using a normal tone
of voice.
3.
Release the
TALK
button when you have finished transmitting.
NOTE: In order for other people to receive your transmission, they must also be on
the same channel you are currently using. Refer to the
for more information.
Presione y mantenga presionado el botón
"bip" y la PANTALLA LCD mostrará
Presione y mantenga presionado el botón
"bip" y la PANTALLA LCD quedará en blanco.
1.
presionado el botón
MONITOR
para TRANSMITIR. EL INDICADOR
2.
Mientras mantiene presionado el botón
un tono normal de voz.
3.
LCD
MONITOR
Don't
section
POWER
. Se oirá un sonida
y el canal actual.
POWER
. Se oirá un sonida
TALK
hacia la unidad con
TALK
.
Hide quick links:
Advertisement
Table of Contents
