Page 1
Installation Manual CCS-100 WARNING: DO NOT ATTEMPT TO INSTALL OR USE THE CCS100 FIXTURE WITHOUT READING THE INSTALLATION INSTRUCTIONS AND SAFETY LABELS COMPLETELY. Failure to adhere to these instructions could result in serious injury or property damage. DO NOT MODIFY, ALTER OR ATTEMPT TO SERVICE THE CCS100. DOING SO WILL VOID THE WARRANTY.
Page 2
Installation Instructions CCS100 DMX Controlled Dimmable LED Light Strips Introduction: The Boca CCS100 is designed for low power applications where energy consumption and size are the main concerns. It can be specified with either one row or two rows, depending on the light output required. It offers seamless LED configuration, easy installation, and vibrant monochromatic color.
Page 3
Installation Instructions CCS100 1. INSTALL CLIPS INTO SUBSTRATE Screw Information: 1. Screws not provided by Boca Flasher. 2. For Tube Boca, Flasher recommends wide washer flat head Philips #8 screw. (not to exceed .418”) For Underwater Tube, Boca Flasher recommends Philips #8 screw.
Page 4
Installation Instructions CCS100 4 CONNECT FIXTURES TO POWER 24VAC Power Supply By others. 24DC Power Supply Note: If contractor wishes to hard wire fixture, cable can be stripped of Edison plug and hardwired using a junction box. Molded cable must be encased in conduit. PAGE 4 OF 6...
Need help?
Do you have a question about the CCS-100 and is the answer not in the manual?
Questions and answers