Table of Contents
Advertisement
3. BASIC OPERATION OF SERVICE MENU
(1) How to enter SERVICE MENU
Press the DISPLAY key and the PICTURE MODE key of the
REMOTE CONTROL UNIT simultaneously.
The SERVICE MENU screen of Fig. 1 will be displayed.
(2) Selection of SUB MENU SCREEN
Press one of the keys 1 ～ 6 of the REMOTE CONTROL UNIT,
and select the SUB MENU SCREEN (See Fig.2 on the next page) from the SERVICE MENU.
SERVICE MENU
(3) Method of Setting
$ Once the setting values are set, they are memorized automatically.
$ It must not adjust without signal.
1) 1. IF
[1. VCO]
① 1 Key
･･････････････････････････ Select 1. IF.
② 1 Key
･･････････････････････････ Select 1. VCO(CW).
③ VCO(CW) ････････････････････････ Adjust VCO(CW) while watching the colour (yellow / blue) of the characters on the
④ DISPLAY Key
[2. DELAY POINT]
① 1 Key
･･････････････････････････ Select 1. IF.
② 2 Key
･･････････････････････････ Select 2. DELAY POINT.
③ MENU - / + Key
④ DISPLAY Key
2) 2. V/C, 3. DEF, 4.VSM PRESET and 5. PRESET
① 2 ～ 5 Keys
･･････････････････････ Select one from 2. V/C, 3.DEF, 4.VSM PRESET and 5. PRESET.
② MENU △ / ▽ key
③ MENU - / + Key
④ DISPLAY Key
3) 6. TURBO TIMER
① By pressing the 6-key, you can change the ON/OFF position. [Should be OFF]
(4) Release of SERVICE MENU
After completing the setting, return to the SERVICE MENU by pressing the DISPLAY key, then again press the DISPLAY key to return
to the normal screen.
SUB MENU
1. IF
2. V / C
3. DEF
4. VSM PRESET
5. PRESET
6. TURBO TIMER
screen. For details, refer to the adjustment table.
･･･････････････････ When this is pressed twice, you will return to the SERVICE MENU.
･････････････････ Set (adjust) the setting values of the setting items.
･･･････････････････ When this is pressed twice, you will return to the SERVICE MENU.
･･････････････ Select setting items.
･････････････････ Set (adjust) the setting values of the setting items. (Use the number keys of the
REMOTE CONTROL UNIT for setting of WHITE BALANCE and BLACK OFFSET. For
the setting, refer to each item concerned.)
･･･････････････････ When this is pressed , you will return to the SERVICE MENU.
No. 56091
SERVICE MENU
SERVICE MENU
1.IF
2.V/C
3.DEF
4.VSM PRESET
5.PRESET
6.TURBO TIMER OFF
1-6 SELECT
DISP : EXIT
.
******
******
******
****** *****
*****
*****
*****
** **
**
**
****
****
****
****
***
***
**
**
** **
**
**
***
***
***
***
**
**
**
**
**
**
***
***
Fig.1
AV-14AM
13
Advertisement
Table of Contents
