Adding Times To A Week Program - A.O. Smith SGS-28 Installation, User And Service Manual

4.3.7
0311753_SGS_28-120_II_UKUK_V2.0 , 2017-05-03

Adding times to a week program

Call up the menu to INSERT switch-on and switch-off times into a week program as
follows:
1. [ ]: WEEK PROGRAM | PROGRAM OVERVIEW.
Confirm with [ENTER].
The display shows the menu for the week program. The cursor points to the active
period.
2.
Scroll [ ] to INSERT.
Confirm with [ENTER].
The submenu for adding a period will appear.
Example
As an example, we will program an extra period in which the switch-on time is set to
18:00 and the corresponding switch-off time to 22:00. The water temperature will be set
to 75ºC and the pump will run continuously.
3. Proceed as follows:
a. Set the switch-on time (see section 4.3.6.1).
b. Set the switch-off time (see section 4.3.6.2).
c. Set the water temperature (see section 4.3.6.3).
d. Set the program-controlled pump (see section 4.3.6.4).
4.
To activate the week program with the new period added, scroll down with [ ] to
START OPERATION and confirm with [ENTER].
33