Cleaning - raycop LITE Manual

1
Pull out the
dust box as
shown below.
3
Air dry your filter in a
shaded area, do not use a
dryer. Once dry, secure the
filter back into the dust box.
Inlet
Dust or hair in the inlet may result in reduced
performance. Clearly remove foreign materials
blocking the inlet using a soft brush or fabric.
Caution
A blocked inlet may cause
abnormal sounds or
overheating, which may
result in malfunction or fire.
Filter
To avoid dust from scattering into the air,
2
submerge both the dust box and filter in
water and remove the filter from the dust box.
Note: If the filter is
clogged, you may
notice that the suction
is weaker. Clean the
filter with a mixture of
water:detergent (ratio 9:1).
4
Push back the filter to the
end until you hear a "click"
sound, and reposition
the dust box back in
the product.
Warning
Before cleaning, ensure that
RAYCOP is unplugged from
the power outlet.
1
Push the hook to remove
the UV lamp grill in the
direction of the arrow.
2
Use dry fabric or cleaning
towels to clean the
surroundings of the UV
lamp protective tube.
For more maintenance and parts replacement
(such as: the UV-lamp & HEPA filter) information,
please visit raycop.com/maintain
UV Lamp
Foreign substances clinging onto the lamp may reduce
performance. Please clean the lamp on a regular basis.
Caution
When cleaning, please make
sure the UV lamp protective
tube is not broken.