Table of Contents
Advertisement
GUI – Real-time view
09
[Real-time view]
#
After booting up to drive mode, real-time view is provided.
#
The view screen shows a product's firmware version, video recording time, image quality, GPS signal state, voice
recording state, product temperature, battery voltage, GPS speed(km/h and mi/h), and recording state(REC, EVT).
#
In the screen setting, enable PIP to see the front and rear view images in PIP.
Disable the PIP to see either the front or rear view image. (Default: PIP OFF)
#
Screen saver on: With no action in the real-time view screen, it shifts to the screen saver, which turns off the LCD in
2 minutes if there is no action again.
#
Screen saver off: With no action in the real-time view screen for 2 minutes, the LCD is turned off.
#
Use the reversal switch of rear camera to horizontally reverse the image.
[Real-time view — PIP mode]
[Screen saver]
_ 28
Advertisement
Table of Contents
