Mitsubishi Electric MSZ-GA22VA Operating Instructions Manual page 8

AIR FLOW VELOCITY AND DIRECTION ADJUSTMENT
Movement of the horizontal vane
COOL/DRY
Horizontal position
• The vane automatically moves to horizontal position.
It will not swing.
NOTE:
Air blows out upper than position (1).
• To constantly change the air fl ow direction, select
(SWING) with the button.
V A N E
After
around 0.5
Position (1)
to 1 hour
When the air fl ow direction is
set to position (2), (3) or (4)
• After around one hour of operation, the air conditioner
automatically moves the vane to position (1).
To change the air fl ow direction to the original setting,
operate the VANE button on the remote controller
again.
• The vane does not move to the straight-down position
in the COOL and DRY mode.
• The vane moves intermittently between positions (1)
and (4). The vane stops for a brief period at positions
(1) and (4).
( ) 1
( ) 4
NOTE:
• Adjust the vertical AIR FLOW direction using the remote controller. Moving the horizontal vane manually can cause
trouble.
• When the operation mode changes in " (AUTO)" mode, the horizontal vane is automatically changed to the
position in each mode.
8
HEAT
At the start
of heating
operation
When air
Horizontal becomes
Very small
position warm...
air fl ow
Position (4)
• Immediately after the air conditioner starts operating,
the vane stays at horizontal position. Once the air
from the indoor unit becomes suffi ciently warm, the
vane moves to position (4).
• Once the air conditioner starts operating, the fan
speed increases gradually as the air from the indoor
unit gets warmer, and continues until the set speed is
fi nally reached.
At the start
of heating
operation
When air
Horizontal becomes
Very small
position warm...
air fl ow
Set Position
• Immediately after the air conditioner starts operating,
the vane stays at horizontal position. Once the air
from the indoor unit becomes suffi ciently warm, the
vane moves to the position corresponding to the set
direction of air fl ow.
• Once the air conditioner starts operating, the fan
speed increases gradually as the air from the indoor
unit gets warmer, and continues until the set speed is
fi nally reached.
• The vane moves intermittently between positions (2)
and (4). The vane stops for a brief period at positions
(2) and (4).
( ) 2
( ) 4
To change the horizontal direction of the air fl ow, move the vertical vane manually.
Adjust the vane before operation starts.
Since the horizontal vane moves automatically, your fi ngers may be caught.
To change the air fl ow direction not to blow directly onto your body.
To change the air
When to use this function?
fl ow direction
Pressing and holding Use this function if you don't
V A N E
want the air from the indoor
the button for
unit to blow directly onto your
2 seconds or more
body.
causes the horizontal
• Depending on the shape of
vane to reverse and
the room, the air may blow
move to horizontal
directly onto your body.
position.
V A N E
• Press the button again
to return the vane to the
previously-set position.
Horizontal
position
NOTE:
• If you make the air fl ow not to blow directly onto your body by pressing
minutes even during the operation of the air conditioner.
• The air conditioner operates with decreased air fl ow until the compressor turns on again.
COOL/DRY HEAT
The air conditioner starts the The air conditioner starts heat-
cooling or drying operation ing operation approx. 3 min-
approx. 3 minutes after the utes after the vane has moved
vane has moved to the hori- to the horizontal position.
zontal position. • Sometimes the area around
V A N E
your feet may not warm. To
• When the button is
warn the area around the
pressed again, the vane
feet, set the horizontal vane
returns to the previously-
to (AUTO) or the down-
set position and the air con-
ward blowing position.
ditioner starts the cooling or
V A N E
drying operation in approx. • When the
3 minutes. pressed again, the vane
returns to the previously-set
position and the air condi-
tioner starts heating opera-
tion in approx. 3 minutes.
V A N E
button, the compressor stops for 3
button is